مقالات چاپ شده در نشریات بینالمللی
- A Biabangard Oskouyi , E Atashpaz Gargari , Naser Soltani, and Caro Lucas . "Application of imperialist competitive algorithm for material properties characterization from sharp indentation test." International Journal of Engineering Simulation -, no. --- (1732): 1-8.
- محمد زنگنه , and Naser Soltani. "Anisotropic simulation of single edge cracks in composite laminates using singular elements." International Journal of Engineering Simulation 41031, no. 2 (2004): -.
- Behzad Hakimelahi , Naser Soltani, and Asad Ollah Ghazavi . "An improvement in the modeling of the second derivative of displacement field in structural analysis." MATHEMATICAL AND COMPUTER MODELLING 48, no. 5-6 (2008): 818-831.
- Mahmood Sameezadeh , Hassan Farhangi , Naser Soltani, and Peyman Ataei . "Investigation of fatigue fracture of generator rotor fan blades." INTERNATIONAL JOURNAL OF MATERIALS RESEARCH -, no. 11 (2009): 1607-1613.
- , Naser Soltani, and Kav Sedighiani. "Fracture parameter Analysis on a double edge crack problem by the method of Electronic Speckle Pattern Interferometry (ESPI)." Procedia Engineering 10, no. 10 (2011): 3267-3272.
- Mohammad Hossein Ghasemi Baboli , Meysam Haleghiyan , and Naser Soltani. "Error estimation for evaluating mixed mode stress intensity factors for cracks eminating from sharp nothes using simulated photoelasticity." World Applied Sciences Journal 11, no. 6 (2011): 733-738.
- Davood Akbari , Mohammadreza Farahani, and Naser Soltani. "Effects of the weld groove shape and geometry on residual stresses in dissimilar butt-welded pipes." JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN 47, no. 2 (2012): 73-82.
- Naser Soltani, Karen Abrinia, , and . "A numerical solution for the coupled dynamic thermoelasticity of axisymmetric thin conical shells." MATHEMATICAL AND COMPUTER MODELLING 55, no. 3-4 (2012): 608-621.
- , , , and Naser Soltani. "Analysis of effective parameters for stress intensity factors in the contact problem between an asymmetric wedge and a half-plane using an experimental method of photoelasticity." MATERIALS & DESIGN 43, no. 43 (2013): 447-453.
- Davood Akbari, Naser Soltani, and Mohammadreza Farahani. "Numerical and experimental investigation of defect detection in polymer materials by means of digital shearography with thermal loading." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 3, no. 227 (2013): 430-442.
- Naser Soltani, , and ایمان اشراقی . "Stress field analysis of V-notches with tip cracks in a polymer material using digital image correlation." Journal of Mechanical Engineering Science 4, no. 2 (2013): 23-32.
- , and Naser Soltani. "Investigation of loading parameters in detection of internal cracks of composite material with digital shearography." World Applied Sciences Journal 4, no. 21 (2013): 526-535.
- , Gregory Rutledge, Ali Asghar Atai, Said Ahzi, Yves Remond, and Naser Soltani. "Micromechanical characterization of the interphase layer in semi-crystalline polyethylene." JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS 51, no. 16 (2013): 1228-1243.
- Mohammad Tasdighi, and Naser Soltani. "Effects of fatigue damage on small punch testing of 304 stainless steel." International Journal of Applied Mathematics & Statistics 9, no. 18 (2013): 76-85.
- Mohsen Barmouz, Amir Hosein Behravesh, Farshid Reshadi, and Naser Soltani. "Assessment of defect detection in wood-plastic composites via shearography method." JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS 00, no. 00 (2014): 1-9.
- Mohammad Abshirini, Mohammad Reza Yadegari, Mohammad Aghababaie Beni, and Naser Soltani. "Interaction of two parallel U-notches with tip cracks in PMMA plates under tension using digital image correlation." THEORETICAL AND APPLIED FRACTURE MECHANICS 70, no. 01 (2014): 75-82.
- Hadi Nobakhti, and Naser Soltani. "Evaluating Small Punch Test as Accelerated Creep Test Using Larson-Miller Parameter." EXPERIMENTAL TECHNIQUES 39, no. 4 (2014): n/a-n/a.
- Iman Eshraghi, Naser Soltani, and Mohammad Reza Yadegari Dehnavi. "Effect of subset parameters selection on the estimation of mode-I stress intensity factor in a cracked PMMA specimen using digital image correlation." POLYMER TESTING 37, no. 37 (2014): 193-200.
- Mohammad Reza Yadegari Dehnavi, Seyed Meysam Khaleghian, Anahita Emami, Mehran Tehrani, and Naser Soltani. "Utilizing digital image correlation to determine stress intensity factors." POLYMER TESTING 37, no. 00 (2014): 28-35.
- Amir Yazdanmehr, and Naser Soltani. "Evaluation of stress intensity factors of rounded V and U notches under mixed mode loading, using the experimental method of caustics." THEORETICAL AND APPLIED FRACTURE MECHANICS 74, no. 00 (2014): 79-85.
- Iman Eshraghi, and Naser Soltani. "Stress intensity factor calculation for internal circumferential cracks in functionally graded cylinders using the weight function approach." ENGINEERING FRACTURE MECHANICS 134, no. 00 (2014): 1-19.
- Iman Eshraghi, Serkan Dag, and Naser Soltani. "Consideration of spatial variation of the length scale parameter in static and dynamic analyses of functionally graded annular and circular micro-plates." COMPOSITES PART B-ENGINEERING 78, no. 00 (2015): 338-348.
- Iman Eshraghi, and Naser Soltani. "Thermal stress intensity factor expressions for functionally graded cylinders with internal circumferential cracks using the weight function method." THEORETICAL AND APPLIED FRACTURE MECHANICS 80, no. 80 (2015): 170-181.
- Mohamad Abshirini, Naser Soltani, and Parisa Marashizadeh. "On the mode I fracture analysis of cracked Brazilian disc using a digital image correlation method." OPTICS AND LASERS IN ENGINEERING 78, no. 78 (2016): 99-105.
- Iman Eshraghi, Serkan Dag, and Naser Soltani. "Bending and free vibrations of functionally graded annular and circular micro-plates under thermal loading." COMPOSITE STRUCTURES 137, no. 137 (2016): 196-207.
- Hadi Nobakhti, and Naser Soltani. "Evaluating Small Punch Test as Accelerated Creep Test Using Larson–Miller Parameter." EXPERIMENTAL TECHNIQUES 40, no. 2 (2016): 645-650.
- Iman Eshraghi, Naser Soltani, and Mohamad Rajabi. "Transient Stress Intensity Factors of Functionally Graded Hollow Cylinders with Internal Circumferential Cracks." Latin American Journal of Solids and Structures 13, no. 9 (2016): 1738-1762.
- Mohamad Rajabi, Naser Soltani, and Iman Eshraghi. "Effects of temperature dependent material properties on mixed mode crack tip parameters of functionally graded materials." STRUCTURAL ENGINEERING AND MECHANICS 58, no. 2 (2016): 217-230.
- Mohamad Rajabi, and Naser Soltani. "Mixed-mode thermal fracture of AISI 304 stainless steel with temperature-dependent material properties." ARCHIVES OF MECHANICS 68, no. 4 (2016): 309–326.
- Ehsan Tasdighi, Naser Soltani, and . "Application of Small Punch Test in Predicting the Axial Fatigue Life of 304 Stainless Steel Sheets." EXPERIMENTAL TECHNIQUES 40, no. 4 (2016): 1349-1357.
- Iman Eshraghi, Naser Soltani, and Serkan Dag. "Weight function method for transient thermomechanical fracture analysis of a functionally graded hollow cylinder possessing a circumferential crack." JOURNAL OF THERMAL STRESSES 39, no. 10 (2016): 1182-1199.
- Ali Moradi, Naser Soltani, and Hadi Nobakhti. "Fillet Punch Creep Test of Aluminum Alloy 2024-T851: A New Method to Assess Creep Properties of Materials." EXPERIMENTAL TECHNIQUES 41, no. 1 (2016): 59-67.
- Mohammad Sahlabadi, Arash Valiollahi, Bardia Konh, and Naser Soltani. "Evaluating J-integral and Q parameter in high-density polyethylene using a combined experimental finite element method." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 40, no. 6 (2016): 924-938.
- Majid Heidarvand, Naser Soltani, and Farshid Hajalizadeh. "Experimental and numerical determination of critical stress intensity factor of aluminum curved thin sheets under tensile stress." Journal of Mechanical Science and Technology 31, no. 5 (2017): 2185-2195.
- Hamidreza Asemani, Jinwoo Park, Jung-royal Lee, and Naser Soltani. "Development of PZT-excited stroboscopic shearography for full-field nondestructive evaluation." REVIEW OF SCIENTIFIC INSTRUMENTS 88, no. 5 (2017): 053301.
- Ali Moradi, Naser Soltani, and . "Experimental study of remaining creep life of SA-304L stainless steel using small punch creep test." MATERIALS AT HIGH TEMPERATURES 1, no. 1 (2017): 1-8.
- Ali Moradi, and Naser Soltani. "Response Surface Methodology for the Remaining Creep Life Estimation by the Small Punch Creep Test." JOURNAL OF TESTING AND EVALUATION 46, no. 6 (2018): 20170198.
- Hamidreza Asemani, and Naser Soltani. "The Effectiveness of Laser Shearography for the Inspection of Wall Thinning in a Large Aluminum Plate." JOURNAL OF NONDESTRUCTIVE EVALUATION 38, no. 2 (2019): .
- Abuzar Es'haghi Oskui, Naser Soltani, MOHAMMAD RAJABY, and Siegfried Selberherr . "Mixed-mode fracture behavior of AM60 magnesium alloy using two parameter fracture mechanics." ENGINEERING FRACTURE MECHANICS 218, no. 1 (2019): 106566.
- ناصر سلطانی. "بررسی اثرات تغییر فاصله ترکهای لبه ای برروی مقادیر ضرایب تنش با استفاده از روش تجربی فتوالاستیسیته ( کشسان نگاری )." دانشکده علوم تربیتی دانشگاه تهران -، --- (1374): -.
- پویا آزاد و ناصر سلطانی. "تحلیل ترک های صفحه ای در فضای سه بعدی با به کارگیری اجزا محدود غیرخطی و محاسبه انتگرال J." دانشکده علوم تربیتی دانشگاه تهران 12، 1 (1379): 29-40.
- محسن کولیوند ، عبدالحمید حنانه و ناصر سلطانی. "محاسبه حساسیت به خطای چرخدنده های هیپوییدی و ضرایب کشسانی جانبی محفظه دیفرانسیل به منظور حفظ مشخصه های اصلی کارآیی." خودرو 41184، 10 (1381): -.
- اعظم تاج الدین ، عبدالحمید حنانه، عمار ملکی ، محسن کولیوند و ناصر سلطانی. "محاسبه مشخصات هندسی سطح دندانه چرخدنده های هیپوییدی." خودرو -، 9 (1382): 1-12.
- محسن کولیوند ، ناصر سلطانی و عبدالحمید حنانه. "بهینه کردن مشخصه های کارایی چرخدنده های هیپوییدیکرانویل و پینیون خودرو با در نظر گرفتن خطاهای ماشینکاری محتمل تر در فرایند تولید." خودرو -، 11 (1382): -.
- ناصر سلطانی و Behzad Hakim Elahi . "3d J - integral evaluation using the computation of line and surface Integrals." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 33، 10 (1389): 661-672.
مقالات چاپ شده در نشریات داخلی
همایشهای بینالمللی
- Majid Javaheri, and Naser Soltani. "A Simple method for generalization of LEFM res to small crack." Fourth Annual Mechanical Engineering Conference ISME, Tehran.
- Majid Javaheri, and Naser Soltani. "Theorical method for simulation of R-curves using elastic plastic properties of metal in semi brittle fractru." Fourth Annoual Mechanical Engineering Cinference ISME, Tehran.
- , and Naser Soltani. "Analitical Determination of the J-Integral Formulation for Circumferentialy Cracked Pipes under Tension Bending and Combined Tension Bending." Forth International Conference Iranian Soc Mech Engr, Tehran.
- Naser Soltani, Vahid Esfahanian, and Hassan Haddadpour. "Coupled Formulation of Structure and Aerodynamic with Application in Panel Flutter Using Eigenanalysis." Eighth Annual Conference Of The CFD, Montreal.
- , Majid Nili Ahmad Abadi, , , and Naser Soltani. "Design and development of a pole climing robot mechnism." Robomech, Achen.
- , Abdolhamid Hannaneh, Naser Soltani, and . "Optimization of hypoid gear performance characteristics with typical manufaturing and assembly errors." International Mechanical Engr Congress, Turin.
- , Abdolhamid Hannaneh, Naser Soltani, and . "Retaining hypoid gear performance characteristics with differetial housing and shaft deflections." International Mechanical Engineering Congress, Chicago.
- Mehdi Ghassemieh, , and Naser Soltani. "Application of digital shearography in determining opening mode SIF in edge cracks." Fracture and Engr. Materials and Structures, Greece.
- Mehdi Ghassemieh, , and Naser Soltani. "Steel extended end plate moment connections subjected to cylic loading." 7th international congress on advances in civil engineering, Istanbul.
- Mehdi Ghassemieh, , and Naser Soltani. "Numerical Investigation on the behavior of steel flush end-plate connection." 7th international congress on advances in civil engineering, Istanbul.
- , Naser Soltani, and Abbas Rastgo Ghamsari. "Numerical study of instrumented spherical indentation test using artificial neural network." MDP-9, Cairo.
- , Naser Soltani, and . "Fracture parameer analysis on a double edge crack problem by the method of electronic speckle pattern interferometry." Procedia engineering,.
- , Naser Soltani, , and . "Obtaining the temprature history experiencedin friction stir wellding of AL alloy." International Conference on Experimental Mechanics,.
- , Naser Soltani, and . "Detrmination of stress intensity factors in a half plane with vertical edge crack ... using digital shearography." Annua con. of Mech. engineering 2011, Birjand.
- Seyed Meysam Khaleghian, Anahita Emami, , and Naser Soltani. "The effect of wedge tip angles on stress intensity factors in a contact problem between a tilted wedge and a half plane .....DIC." The international conference on experimental solid mechanics and dynamics, Tehran.
- Danial Ghahremani, Naser Soltani, , , and . "Analysis of some effective parameters on stress intensity factors...digital shearography." The international conference on experimental solid mechanics and dynamics, Tehran.
- Ehsan Tasdighi, and Naser Soltani. "Evaluation of fatigue damage in SS304 using small punch creep test." The international conference on experimental solid mechanics and dynamics, Tehran.
- Naser Soltani, محمدرضا یادگاری , and Iman Eshraghi. "Investigation of fracture parameters of V-Notches in a polymer materials using DIC." Experimental Stress Analysis,.
- Mohamad Rajabi, Iman Eshraghi, and Naser Soltani. "Study of Low Temperature Effects on Fracture Parameters of Stainless Steel with Parallel Edge V-notches using Digital Image Correlation." The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014), Tehran.
- Hadi Nobakhti, Ehsan Tasdighi, and Naser Soltani. "Determination of the elastic and plastic properties of SS304 at high temp. by application of invers FEA on small punch creep test results." The Bi-Annual international conf. on experimental solid mechanics, Tehran.
- Ehsan Tasdighi, Hadi Nobakhti, and Naser Soltani. "Investigation of fatigue damage effect on elastic properties of 304 SS using small punch test." The Bi-Annual international conf. on experimental solid mech., Tehran.
- Mohamad Rajabi, and Naser Soltani. "Fracture of Stainless Steels with Temperature Dependent Material Properties under Thermal Gradient and Cryogenic Temperature." The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2016), Tehran.
- Ali Moradi, Naser Soltani, and . "Introducing a New Small-Specimen Method to Evaluate the Creep Properties of Al2024-T851." The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran.
- Hamidreza Asemani, Jinwoo Park, Naser Soltani, and Jung-ryul Lee. "Defect detection using Stroboscopic Shearography." KSAS 2016 Spring Conference,.
- Ali Moradi, Naser Soltani, and . "Time-Temperature Parametric Analysis of SA-304L Aged Material by Small Punch Creep Test." 33nd Danubia-Adria Symposium on Advances in Experimental Mechanics, Portorož, Slovenia, 2016, Porto.
- Hamidreza Asemani, Naser Soltani, and Ali Shivaei Kojouri. "Non-destructive testing of large area aluminum plate using stroboscopic shearography." The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran.
- Abdalrahman Haghighi, and Naser Soltani. "Evaluating the Accuracy and Reliability of Digital Image Correlation in One-dimensional Rigid Displacement." The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2020), Tehran.
- Milad Zolfipour aghdam vayghan, Naser Soltani, and Hamidreza Asemani. "Using Nanoparticle Coating in Dedicated Digital Image Correlation for Mixed-Mode CTOD Calculation and Crach-Growth Estimation." 1st International Conference of Mechanics, Industries Manufacturing & Materials,.
- توحیدی، نصراله تابنده، ناصر سلطانی و بهزاد حکیم الهی. "استخراج رابطه انتگرال J برای ترک نیم دایره ای در پوشش هدفمند محیط نیم بینهایت." همایش سالیانه بین المللی مهندسی مکانیک ایران، تهران.