مقالات چاپ شده در نشریات بینالمللی
- Mahmoud Nili Ahmadabadi, E Niyama , M Tanino , T Abe , and T Ohide . "Composition and Structural Identification of Eutectic Carbide in 1% Mn Ductile Iron." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 25, no. 5 (1732): 911-918
.
- Mahmoud Nili Ahmadabadi. "Effects of inoculants and feederNeck modulus on the Shrinkage behavior of Unalloyed ductile Iron." submitted for publication -, no. --- (1732): -.
- Seyed Mohammad Seyyed Aghamiri , Mahmoud Nili Ahmadabadi, and Shahram Raygan. "Combined effects of different heat treatments and Cu element on transformation behavior of NiTi orthodontic wires." Journal of the Mechanical Behavior of Biomedical Materials 4, no. 3 (1732): 298-302
.
- Mahmoud Nili Ahmadabadi. "Wear behavior of austempered Ductile Iron." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH 4, no. 4 (1991): -.
- Mahmoud Nili Ahmadabadi, T Ohide , and E Niyama . "Mechanical Properties of hight MN ductile Iron Treated by Successive Austempering Process." Trans of JES -, no. 11 (1992): -.
- Mahmoud Nili Ahmadabadi, T Ohide , and E Niyama . "Effects of Successive - Stage Austempering on the Structure and Impact sterngth of Hight MN Ductile Iron." Cast Meteals 5, no. 2 (1992): -.
- Mahmoud Nili Ahmadabadi, E Niyama , M Tanino , T Abe , and T Ohide . "Chemical composition and structural identification of eutectic carbide in 1 Pct Mn ductil Iron." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 25, no. 5 (1993): 911-918.
- Mahmoud Nili Ahmadabadi, E Niyama , and T Ohide . "Eutecnic carbide formation in high Mn ductile iron." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH -, no. --- (1994): -.
- T Ohide , Mahmoud Nili Ahmadabadi, and S Kawashima . "Application of successive austempering process to spheroidal graphite cast iron produced by inmold process." IMMUNOLOGY 66, no. 6 (1994): 430-435.
- Mahmoud Nili Ahmadabadi, E Niyama , and T Ohide . "Structural control of 1% Mn ADI aided by modeling of microsegregation." AFS Trans -, no. --- (1994): -.
- Mahmoud Nili Ahmadabadi, Nili Echigoya J , and E Niyama . "Transmission electron microscopy study of high temperature bainitic transformation in 1 wt.% Mn ductile iron." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 194, no. 87-98 (1995): 87-98.
- Mahmoud Nili Ahmadabadi, E Niyama , and J Echigoya . "TEM Study of Hight Temperature Bainitic Transformation in 1% Mn Ductile Iron." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING -, no. 194 (1995): 98-87.
- M Saito , Mahmoud Nili Ahmadabadi, and T Ohide . "Effect of Graphite Nodule Count and MN Content on successive Austempering process of Austempered Ductile Iron." IMMUNOLOGY 67, no. 2 (1995): 106-111.
- Mahmoud Nili Ahmadabadi. "Baintic transformation in ADI with Reference to Untranaformed Austenite Volume(UAV)i." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE -, no. 28A (1997): -.
- Mahmoud Nili Ahmadabadi, B Abbasi , and M Bahmani . "Effect of Austempering Variables on the Mechanical Properties of Ni - Mn - Cu Austemered Ductile Iron." AFS Trans 101, no. --- (1997): -.
- Mahmoud Nili Ahmadabadi, M R Ghasemi , and M Osia . "Wear Behavior of High Mn Ductile Iron Treated by Different Austempering Processes, to be appeared in the Proc." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH -, no. 4 (1997): 24-26.
- Mahmoud Nili Ahmadabadi. "A transmission electron microscope study of 1 Pct Mn ductile iron with different austempering treatments." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 29, no. 9 (1998): 2297-2306 .
- Mahmoud Nili Ahmadabadi, Hr Ghasemi , and M Osia . "Effect of Successive Austempering on the Tribological Behavior of Ductile Cast Iron." WEAR 231, no. 2 (1999): 293-300.
- Mahmoud Nili Ahmadabadi, and R Shamloo . "Control of Austenitization aided by calculation of phase boundaries of Fe-Mn-Si-X alloy." to be appeared in Journal of Phase equilibria 22, no. 3 (2000): -.
- Mahmoud Nili Ahmadabadi. "Effect of temperature on hot formability of ductile iron in semi solid state." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH 16, no. 1,3 (2003): -.
- Mahmoud Nili Ahmadabadi, and S Farjami . "Application of computational thermodynamics and kinetics to control of high Mn ductile iron austempering." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH 16, no. 1-3 (2003): 71-75.
- S Farjami , and Mahmoud Nili Ahmadabadi. "Transformation kinetics of unalloyed and high Mn austempered ductile iron." MATERIALS SCIENCE AND TECHNOLOGY 19, no. 5 (2003): 645-649.
- Nejad S Hossein , and Mahmoud Nili Ahmadabadi. "Effect of Ti addition on the microstructure and mechanical properties of a cast Fe - Ni Mo Mn Maraging steel." Journal de Physique 112, no. 1 (2003): 461-464.
- K Edalati , Farshid Akhlaghi , and Mahmoud Nili Ahmadabadi. "Influence of inoculant and / or SiC addition in characteristics of grey cast iron." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH 17, no. 3 (2004): 147-151.
- Pahlevani Farshid , and Mahmoud Nili Ahmadabadi. "Development of Semi-solis ductile cast iron." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH 17, no. 3 (2004): 157-161.
- فرهنگی , نوروزی , and Mahmoud Nili Ahmadabadi. "Efect of casting process variables on the residual stress in Ni - base superalloy." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY -, no. 153,154 (2004): 209-212.
- Mahmoud Nili Ahmadabadi, and Mosallaiee Pour . "Homogenization of ductile iron using partial melting aided by modeling." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 373, no. 1-2 (2004): 309-314.
- Ar Mirak , and Mahmoud Nili Ahmadabadi. "Effect of modified heat treatments on the microstructure and mechanical properties of a low alloy high strength steel." MATERIALS SCIENCE AND TECHNOLOGY 20, no. 7 (2004): 897-902.
- Sheikh Abdolhossein , and Mahmoud Nili Ahmadabadi. "THE EFFECT OF HOLDING TIME ON TEMPERATURE EUTECTIC UNDERCOOLING IN DUCTLIE IRON." iranian journal of material science and engineering 1, no. 3 (2004): -.
- S Hossein Nedjad , Mahmoud Nili Ahmadabadi, R Mahmoudi , and Hasan Farhangi. "Effect of conventional and subzero treating on the mechanical properties of aged martensitic Fe - 12 wt% Ni - X wt % Mn alloys." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 378, no. 1,2 (2004): 314-318.
- H Farhangi , Mahmoud Nili Ahmadabadi, R Mahmudi , and S Hossein Nedjad . "Effect of subzero treating on the mechanical properties of aged martensitic Fe - 12Ni - XMo alloys." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 378, no. 1,2 (2004): 314-318.
- Hasan Farhangi, S Norouzi , and Mahmoud Nili Ahmadabadi. "Effects of casting process variables on the residual stress in Ni - base superalloys." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 153-154, no. --- (2004): 209-212.
- Mahmoud Heydarzadeh Sohi , Mahmoud Nili Ahmadabadi, and Bahrami Vahdat . "The Role of Austempering Parameters on the Structure and Mechanical Properties of Heavy Section ADI." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 153-154, no. --- (2004): 203-208.
- Sheykh Abdolhossein , and Mahmoud Nili Ahmadabadi. "Fading investigation in ductile cast iron aided by cooling curve analysis." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH 5, no. 18 (2005): 295-299.
- K Edalati , F Akhlaghi , and Mahmoud Nili Ahmadabadi. "Influence of SiC and FeSi addition on the characteristics of gray cast iron melts poured at different temperatures." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 160, no. 2 (2005): 183-187.
- Sh Nedjad , Mahmoud Nili Ahmadabadi, T Furuhara , and T Maki . "High resolution transmission electron microscopy study on the nano - scale twinning of theta - NiMn precipitates in an Fe - Ni - Mn maraging alloy." PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE 203, no. 9 (2006): 2229-2235.
- Hamid Reza Jafarian , Hasan Ghasemiarmaki , Mahmoud Nili Ahmadabadi, and Saeid Heshmati Manesh. "Effect of initial microstructure and further thermomechanical processing on microstructural evolution in a Ti - 47Al - 2Cr alloy." JOURNAL OF ALLOYS AND COMPOUNDS 436, no. 1,2 (2006): 200-203.
- S Hossein Nedjad , Mahmoud Nili Ahmadabadi, Tadashi Furuhara , and Tadashi Maki . "Evolution of precipitate coarsening reaction in a nanostructured FeNiMn maraging alloy." Diffusion and Defect Data Pt.B: Solid State Phenomena -, no. 114 (2006): 159-164.
- P Babaghorbani , S Salarfar , and Mahmoud Nili Ahmadabadi. "Kinetics of coarsening and solid sphericity during reheating of ductile iron and Al alloys." Diffusion and Defect Data Pt.B: Solid State Phenomena -, no. 116-117 (2006): 205-208.
- S Ashouri , and Mahmoud Nili Ahmadabadi. "effect of slope plate variables and reheating on the semi - solid structure of Al alloys." Diffusion and Defect Data Pt.B: Solid State Phenomena -, no. 116-117 (2006): 201-204.
- Mahmoud Nili Ahmadabadi, and شهاب الدین فقاهتی . "Use of modeling to optimise homogenization of high Mn heavy section ductile iron castings using partial melting." INTERNATIONAL JOURNAL OF CAST METALS RESEARCH 20, no. 2 (2007): 53-57.
- Mahmoud Nili Ahmadabadi. "Effect of Slope Plate Variable and Reheating on the Semi - Solid Structure of Ductile Cast Iron." Tsinghua Science and Technology 13, no. 2 (2008): 147-151.
- Mohammad Habibi Parsa, Mahmoud Nili Ahmadabadi, Hassan Shirazi , Behrang Poorganjib , and Payam Pournia . "Evaluation of microstructure change and hot workability of high Nickel high strength steel using wedge test." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 199, no. 1,3 (2008): 304-313.
- Mahmoud Nili Ahmadabadi, Tahereh Shahhoseini, Mohammad Habibi Parsa, Maryam Haj-fathalian, Tahereh Hoseinzadeh-nik, and Hananeh Ghadirian. "Static and Cyclic Load-Deflection Characteristics of NiTi Orthodontic Archwires Using Modified Bending Tests." JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 18, no. 5-6 (2009): 793-796.
- Hamid Reza Ghasemi Monfared Rad, Mahmoud Nili Ahmadabadi, Morteza Abedini, and Reza Mahmuodi. "Effect of phase transformation on the wear behavior of NiTi alloy." JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME 132, no. 132 (2010): 0310101-0310105.
- Mahmoud Nili Ahmadabadi, and F. Haji Akbari. "Microstructural Evolution of Bainitic Steel Severely Deformed by Equal Channel Angular Pressing." International Journal of Nanoscience 10, no. 10 (2010): 5986-5993.
- Hadi Ghasemi Nansa, Mahmoud Nili Ahmadabadi, , , and Seyed Mohammad Hasan Pish Bin. "Ductility enhancement in ultrafine-grained Fe-Ni-Mn martensitic steel by stress-induced reverse transformation." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 527, no. 527 (2010): 7552–7556.
- Siamak Hossein Nedjad, Hossein Nasiri, Ali Movagar, , and Mahmoud Nili Ahmadabadi. "X-ray diffraction study on the strain anisotropy and dislocation structure of deformed lath martensite." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 42, no. 42 (2011): 2493-2497.
- Hasan Shirazi, Siamak Hossein Nedjad, Hadi Ghasemi Nanesa, T.f Furuhara, Mahmoud Nili Ahmadabadi, and G.t Miyamoto. "Microstructural evaluation of austenite reversion during intercritical annealing of Fe–Ni–Mn martensitic steel." JOURNAL OF ALLOYS AND COMPOUNDS in press, no. in press (2012): in press.
- Amir Seifoddini, Mihai Stoica, Mahmoud Nili Ahmadabadi, Saeid Heshmati Manesh, Uta Kuhn, and Jurgen Eckert. "New (Fe0.9Ni0.1)77Mo5P9C7.5B1.5 glassy alloys with enhanced glass-forming ability and large compressive strain." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 1, no. 560 (2013): 575-582.
- Seyyed Aghamiri Sm , Mahmoud Nili Ahmadabadi, Hamed Shahmir , Fariba Naghdi , and Shahram Raygan. "Study of thermomechanical treatment on mechanical - induced phase transformation of NiTi and TiNiCu wires." Journal of the Mechanical Behavior of Biomedical Materials 21, no. 1 (2013): 32-36.
- Hamed Shahmir, Mahmoud Nili Ahmadabadi, T.g Langdon, and Mojtaba Mansouri-arani. "The processing of NiTi shape memory alloys by equal-channel angular pressing at room temperature." MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS A, no. 576 (2013): 178-184.
- Mohsen Askari Paykani, Mahmoud Nili Ahmadabadi, and Amir Seifoddini. "The effect of liquid phase separation on the Vickers micro indentation shear bands evolution in a Fe-based bulk metallic glass." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 585, no. 585 (2013): 363-370.
- Seyed Vahid Seyed Vakili, and Mahmoud Nili Ahmadabadi. "On the filling of semi-solid during thixocasting." Diffusion and Defect Data Pt.B: Solid State Phenomena 192, no. 193 (2013): 347-352.
- Saeideh Mirab, and Mahmoud Nili Ahmadabadi. "On the flow and mechanical behavior of Al matrix composite reinforced by nickel based (90% Ni-10% Cr) wires during equal channel angular pressing." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 583, no. 583 (2013): 43-51.
- Navid Rahgozar, Mahmoud Nili Ahmadabadi, and Farsad Forghani. "Development of high Mo carbide free thick section nodular cast iron by partial melting homogenisation." JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 29, no. 11 (2013): 1346-1353.
- Mohsen Toofaninejad, and Mahmoud Nili Ahmadabadi. "Effect of equal channel angular pressing on the microstructure and mechanical properties of AISI type 304 austenitic stainless steel." Advanced Materials Research 829, no. 829 (2013): 86-90.
- Marzyeh Moradi, Mahmoud Nili Ahmadabadi, , , and . "EBSD and DTA Characterization of A356 Alloy Deformed by ECAP During Reheating and Partial Re-melting." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 192, no. 192 (2013): 347-352.
- Nazanin Forouzanmehr, and Mahmoud Nili Ahmadabadi. "Free volume study of severely plastic deformed pure Fe." Advanced Materials Research 829, no. 829 (2013): 110-114.
- Hamidreza Koohdar, Mahmoud Nili Ahmadabadi, Mohammad Habibi Parsa, and Hadi Ghasemi Nansa. "Investigating on the reverse transformation of martensite to austenite and Pseudoelastic behavior in Ultrafine-Grained Fe-10Ni-7Mn (wt %) Steel processed by heavy cold rolling." Advanced Materials Research 829, no. 829 (2013): 25-29.
- Mohsen Askari Paykani, Mahmoud Nili Ahmadabadi, and Amir Seifoddini. "The effect of liquid phase separation on the Vickers microindentation shear bands evolution in a Fe-based bulk metallic." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 585, no. 585 (2013): 363-370.
- Hamed Shahmir, Mahmoud Nili Ahmadabadi, Yi Huang, and Terence G. Langdon. "Evolution of microstructure and hardness in NiTi shape memory alloys processed by high-pressure torsion." JOURNAL OF MATERIALS SCIENCE 49, no. 8 (2014): 2998-3009.
- Hamed Shahmir, Mahmoud Nili Ahmadabadi, Mojtaba Mansouri Arani, Ali Khajezade, and T.g Langdon. "Evaluating a New Core-Sheath Procedure for Processing Hard Metals by Equal-Channel Angular Pressing." ADVANCED ENGINEERING MATERIALS 192, no. 193 (2014): 1-9.
- Mohsen Askari Paykani, Mahmoud Nili Ahmadabadi, and Amir Seifoddini. "On the subsurface deformation of two different Fe-based bulk metallic glasses indented by Vickers micro hardness." INTERMETALLICS 46, no. 46 (2014): 118.125.
- Hadi Ghasemi Nansa, Mahmoud Nili Ahmadabadi, Arya Mirsepasi, and Cyrus Zamani. "Nano- and Microvoid Formation in Ultrafine-Grained Martensitic Fe-Ni-Mn Steel After Severe Cold Rolling." METALS AND MATERIALS INTERNATIONAL 20, no. 2 (2014): 201-205.
- Farsad Forghani, and Mahmoud Nili Ahmadabadi. "Microstructural characteristics and second-phase particles in yttrium-bearing Fe-10Ni-7Mn martensitic steels." JOURNAL OF RARE EARTHS 32, no. 4 (2014): 326-333.
- Maryam Mohry, Mahmoud Nili Ahmadabadi, and Stefan Flege. "Diffusion evaluation of Cu in NiTi Bi-layer thin film interface." JOURNAL OF ALLOYS AND COMPOUNDS 594, no. 594 (2014): 87-92.
- Mohsen Toofaninejad, Mahmoud Nili Ahmadabadi, and Hasan Shirazi. "Microstructural Evolution of Semi-Solid Type 304 Stainless Steel Deformed Severely by ECAP." Diffusion and Defect Data Pt.B: Solid State Phenomena 217-218, no. 217 (2014): 99-104.
- Maryam Mohry, Mahmoud Nili Ahmadabadi, and Julia Ivanisenko. "On the Super-Elastic and Phase Transformation of a Novel Ni-Rich/NiTiCu Bi-Layer Thin Film." ADVANCED ENGINEERING MATERIALS 17, no. 6 (2014): 856-865.
- Hamed Shahmir, Mahmoud Nili Ahmadabadi, Mojtaba Mansouri Arani, Ali Khajezadeh, and Terence G. Langdon. "Evaluating the Room Temperature ECAP Processing of a NiTi Alloy via Simulation and Experiments." ADVANCED ENGINEERING MATERIALS 17, no. 4 (2014): 532-538.
- Hamed Shahmir, Mahmoud Nili Ahmadabadi, Jai Myun Jung, Yi Huang, Hyoung Seop Kimb , and Terence G. Langdon. "Shape memory effect in nanocrystalline NiTi alloy processed by high-pressure torsion." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 626, no. 629 (2015): 203-206.
- Maryam Mohry, and Mahmoud Nili Ahmadabadi. "Functionally Graded Shape-Memory and Pseudoelastic Response in Ni-Rich/Ti-Rich and Vice Versa NiTi Multilayer Thin Films Deposited on Si(111)." JOM 67, no. 7 (2015): 1585-1593.
- Fat Sae, and Mahmoud Nili Ahmadabadi. "Thermal behavior of Fe40Co8Cr15Mo13Y2C16B6 bulk metallic glass with reference to irreversible structural relaxation." MATERIALS LETTERS 143, no. 143 (2015): 108-111.
- Hamed Shahmir, Mahmoud Nili Ahmadabadi, Alireza Razaghi, Mahdi Mohammadi, Terence G. Langdon, Jai Myun Jung, Hyoung Seop Kim, and Terence Langdon. "Using dilatometry to study martensitic stabilization and recrystallization kinetics in a severely deformed NiTi alloy." JOURNAL OF MATERIALS SCIENCE 50, no. 11 (2015): 4003-4011.
- Hamed Shahmir, Mahmoud Nili Ahmadabadi, Terence G. Langdon, Chuan Ting Wang, Jai Myun Jung, Hyoung Seop Kim, and Terence Langdon. "Annealing behavior and shape memory effect in NiTi alloy processed by equal-channel angular pressing at room temperature." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 629, no. 629 (2015): 16-22.
- Maryam Mohry, Mahmoud Nili Ahmadabadi, Julia Ivanisenko, Ruth Schwaiger, Horst Hahn B, and Venkata Sai Kiran Chakravadhanula. "Microstructure and mechanical behavior of a shape memory Ni–Ti bi-layer thin film." THIN SOLID FILMS 583, no. 583 (2015): 245-254.
- Maryam Mohry, Mahmoud Nili Ahmadabadi, and Venkata Sai Kiran Chakravadhanula. "Crystallization study of amorphous sputtered NiTi bi-layer thin film." MATERIALS CHARACTERIZATION 103, no. 103 (2015): 75-80.
- Maryam Mohry, Mahmoud Nili Ahmadabadi, Yi Huang, Jai Myun Jung, Hyoung Seop Kim, and Terence G Langdon. "Phase transformation and structure of functionally graded Ni–Ti bi-layer thin films with two-way shape memory effect." SENSORS AND ACTUATORS A-PHYSICAL 228, no. 228 (2015): 151-158.
- Nazanin Forouzanmehr, Mahmoud Nili Ahmadabadi, and Mohsen Samadi Khoshkhoo. "On the microstructure and mechanical properties of severely cold shape rolled Cu." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 650, no. 650 (2016): 264-272.
- Hamidreza Koohdar, Mahmoud Nili Ahmadabadi, Mohammad Habibi Parsa, Hassan Shirazi, Hadi Ghasemi Nansa, and . "Observation of pseudoelasticity in a cold rolled Fe–Ni–Mn martensitic steel." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 658, no. 658 (2016): 86-90.
- Saeideh Mirab, Mahmoud Nili Ahmadabadi, Ali Khajezadeh, Mohamad Abshirini, Mohammad Habibi Parsa, and Naser Soltani. "On the Deformation Analysis during RCSR Process Aided by Finite Element Modeling and Digital Image Correlation." ADVANCED ENGINEERING MATERIALS 18, no. 8 (2016): 1434-1443.
- Nazanin Forouzanmehr, Mahmoud Nili Ahmadabadi, and Matthias Bonisch. "The analysis of severely deformed pure Fe structure aided by X-ray diffraction profile." PHYSICS OF METALS AND METALLOGRAPHY 117, no. 6 (2016): 624-633.
- Maryam Mohry, Mahmoud Nili Ahmadabadi, Mohsen Pouryazdanpanah, and Horst Hahn. "Evaluation of structure and mechanical properties of Ni-rich NiTi/Kapton composite film." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 668, no. 668 (2016): 13-19.
- Alireza Derakhshandeh, Mahmoud Nili Ahmadabadi, Ali Khajezadeh, and Hamed Shahmir. "Room Temperature Flow Behavior of Ti Deformed by Equal-Channel Angular Pressing Using Core-Sheath Method." ADVANCED ENGINEERING MATERIALS 19, no. 2 (2016): 1600552.
- Mohammad Amin Moghadasi, Mahmoud Nili Ahmadabadi, Farsad Forghani, and Hyoung Seop Kim. "Development of an oxide-dispersion-strengthened steel by introducing oxygen carrier compound into the melt aided by a general thermodynamic model." Scientific Reports 6, no. 1 (2016): 38621.
- Peyman Asghari-rad, Mahmoud Nili Ahmadabadi, Hassan Shirazi, Sebastian Koldorf, and Sebastian Koldorf. "A Significant Improvement in the Mechanical Properties of AISI 304 Stainless Steel by a Combined RCSR and Annealing Process." ADVANCED ENGINEERING MATERIALS 19, no. 3 (2016): 1600663.
- Saeideh Mirab, Mahmoud Nili Ahmadabadi, Ali Khajezadeh, and Hamidreza Jafarian. "Correlation between poly-modal grain size and peculiar mechanical properties of pure aluminum deformed by RCSR process." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 700, no. 1 (2017): 416-424.
- Hamidreza Koohdar, Mahmoud Nili Ahmadabadi, Mohammad Habibi Parsa, Hamidreza Jafarian, Tilak Bhattacharjee, and Nobuhiro Tsuji. "On the Stability of Reversely Formed Austenite and Related Mechanism of Transformation in an Fe-Ni-Mn Martensitic Steel Aided by Electron Backscattering Diffraction and Atom Probe Tomography." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 48, no. 11 (2017): 5244-5257.
- Maryam Mohry, Milad Taghizadeh, Di Wang, Horst Hahn, and Mahmoud Nili Ahmadabadi. "Microstructural study and simulation of intrinsic two-way shape memory behavior of functionally graded Ni-rich/NiTiCu thin film." MATERIALS CHARACTERIZATION 135, no. 135 (2018): 317-324.
- Hassan Shirazi, G. Miyamoto, Siamak Hossein Nedjad, T. Chiba, Mahmoud Nili Ahmadabadi, and Tadashi Furuhara. "Microstructure evolution during austenite reversion in Fe-Ni martensitic alloys." ACTA MATERIALIA 144, no. 144 (2018): 269-280.
- Hamed Shahmir, Mahmoud Nili Ahmadabadi, Ahad Shafiee, and T.g Langdon. "Effect of a minor titanium addition on the superplastic properties of a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 718, no. 1 (2018): 468-476.
- Hamed Shahmir, Mahmoud Nili Ahmadabadi, Ahad Shafiee, Mariusz Andrzejczuk, T.g Langdon, and Malgorzata Lewandowska. "Effect of Ti on phase stability and strengthening mechanisms of a nanocrystalline CoCrFeMnNi high-entropy alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 725, no. 1 (2018): 196-206.
- Alireza Derakhshandeh, Hamed Shahmir, and Mahmoud Nili Ahmadabadi. "Microstructure and mechanical properties of ultrafine-grained titanium processed by multi-pass ECAP at room temperature using core–sheath method." JOURNAL OF MATERIALS RESEARCH 125, no. 1 (2018): 1-9.
- Hamed Shahmir, Mahmoud Nili Ahmadabadi, Yi Huang, Jai Myun Jung, Hyoung Seop Kim, and T.g Langdon. "Shape memory characteristics of a nanocrystalline TiNi alloy processed by HPT followed by post-deformation annealing." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 734, no. 734 (2018): 445-452.
- Yalda Karimi, Siamak Hossein Nedjad, Mahmoud Nili Ahmadabadi, Hassan Shirazi, and Hamed Zargari. "Cold rolling and intercritical annealing of C-Mn steel sheets with different initial microstructures." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 736, no. 1 (2018): 392-399.
- Farsad Forghani, Jong Chan Han, Jongun Moon, Reza Abbaschian, Chan Gyung Park, Hyoung Seop Kim, and Mahmoud Nili Ahmadabadi. "On the control of structural/compositional ratio of coherent order-disorder interfaces." JOURNAL OF ALLOYS AND COMPOUNDS 777, no. 1 (2019): 1222-1233.
- Faezeh Javadzadeh Kalahroudi, Hamidreza Koohdar, Hamidreza Jafarian, T.g Langdon, Jurgen Scheffran, and Mahmoud Nili Ahmadabadi. "On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 749, no. 1 (2019): 27-34.
- Ahad Shafiee, Jongun Moon, Hyoung Seop Kim , Mohammad Jahazi, and Mahmoud Nili Ahmadabadi. "Precipitation behaviour and mechanical properties of a new wrought high entropy superalloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 749, no. 1 (2019): 271-280.
- Maryam Mohry, and Mahmoud Nili Ahmadabadi. "On the nano-glass formation of the Ni–Ti thin films and related micro-structure and mechanical properties by controlling sputtering conditions." Materials Research Express 6, no. 7 (2019): 076421.
- Farsad Forghani, Jongun Moon, Jong Chan Han, Reza Rahimi, Reza Abbaschian, Chan Gyung Park, Hyoung Seop Kim, and Mahmoud Nili Ahmadabadi. "Diffuse γ/γ′ interfaces in the hierarchical dual-phase nanostructure of a Ni-Al-Ti alloy." MATERIALS CHARACTERIZATION 153, no. 1 (2019): 284-293.
- Ahad Shafiee, Mahmoud Nili Ahmadabadi, Hyoung Seop Kim, and Mohammad Jahazi. "Development and Microstructural Characterization of a New Wrought High Entropy Superalloy." METALS AND MATERIALS INTERNATIONAL 26, no. 5 (2019): 591-602.
- , Mahmoud Nili Ahmadabadi, Mehdi Mohamadi, Yi Huang, Mariusz Andrezejczuk, Matgorzata Lawandowska, and T.g Langdon. "Effect of Cu on Amorphization of a TiNi Alloy during HPT and Shape Memory Effect after Post‐Deformation Annealing." ADVANCED ENGINEERING MATERIALS 22, no. 1 (2019): 1900387.
- Nazanin Forouzanmehr, Hamidreza Jafarian, Mohsen Samadi Khoshkhoo, Matthias Bonisch, and Mahmoud Nili Ahmadabadi. "Nanostructural Evolution and Deformation Mechanisms of Severely Deformed Pure Fe." METALS AND MATERIALS INTERNATIONAL 27, no. 6 (2020): 1798-1807.
- Farzad GhaziAskari-Naeini, Milad Taghizadeh, MARYAM MOHRI, and Mahmoud Nili Ahmadabadi. "On the microstructure and mechanical properties of a two-way shape memory NiTi/NiTiCu bi-layer diaphragm." MATERIALS & DESIGN 188, no. 188 (2020): 108464.
- Mohammad Sajad Mehranpour, , and Mahmoud Nili Ahmadabadi. "CoCrFeNiMn high entropy alloy microstructure and mechanical properties after severe cold shape rolling and annealing." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 793, no. 1 (2020): 139884.
- , Mohammad Sajad Mehranpour, and Mahmoud Nili Ahmadabadi. "Microstructure and excess free volume of severely cold shape rolled CoCrFeNiMn high entropy alloy." JOURNAL OF ALLOYS AND COMPOUNDS 840, no. 1 (2020): 155672.
- , Mahmoud Nili Ahmadabadi, Faezeh Javadzadeh Kalahroudi, Hamidreza Jafarian, and T.g Langdon. "The effect of high-pressure torsion on the microstructure and outstanding pseudoelasticity of a ternary Fe–Ni–Mn shape memory alloy." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 802, no. 1 (2021): 140647.
- , Pouya Hakimipour, , T.g Langdon, and Mahmoud Nili Ahmadabadi. "Engineering mechanical properties by controlling the microstructure of an Fe–Ni–Mn martensitic steel through pre-cold rolling and subsequent heat treatment." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 804, no. 1 (2021): 140760.
- Faezeh Javadzadeh Kalahroudi, , T.g Langdon, and Mahmoud Nili Ahmadabadi. "Phase evolution and mechanical properties of an intercritically-annealed Fe–10Ni–7Mn (wt. %) martensitic steel severely deformed by high-pressure torsion." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 804, no. 1 (2021): 140519.
- , Peyman Asghari-rad, Mohammad Sajad Mehranpour, Farsad Forghani, Hyoung Seop Kim, and Mahmoud Nili Ahmadabadi. "Evidence of FCC to HCP and BCC-martensitic transformations in a CoCrFeNiMn high-entropy alloy by severe plastic deformation." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 807, no. 1 (2021): 140875.
- , Alireza Derakhshandeh, brian Hallstedt, and Mahmoud Nili Ahmadabadi. "Microstructural evolution and mechanical properties of CoCrFeNiMnTi x high‐entropy alloys." MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK 52, no. 4 (2021): 441-451.
- Mohammad Sajad Mehranpour, , and Mahmoud Nili Ahmadabadi. "Precipitation kinetics in heavily deformed CoCrFeNiMn high entropy alloy." MATERIALS LETTERS 288, no. 1 (2021): 129359.
- Amir Sabet Ghorabaei, and Mahmoud Nili Ahmadabadi. "Effects of prior austenite grain size and phase transformation temperature on bainitic ferrite formation in multi-constituent microstructures of a strong ultra-low-carbon steel." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 815, no. 1 (2021): 141300.
- Aslan Ahadi, Amir Sabet Ghorabaei, Hassan Shirazi, and Mahmoud Nili Ahmadabadi. "Bulk NiTiCuCo shape memory alloys with ultra-high thermal and superelastic cyclic stability." SCRIPTA MATERIALIA 200, no. 1 (2021): 113899.
- , Mohammad Sajad Mehranpour, Alireza Derakhshandeh, and Mahmoud Nili Ahmadabadi. "Microstructure tailoring to enhance mechanical properties in CoCrFeNiMn high-entropy alloy by Ti addition and thermomechanical treatment." MATERIALS CHARACTERIZATION 182, no. 111513 (2021): 111513.
- Sadjad Baradari, Natalia Resnina, Sergey Belyaev, and Mahmoud Nili Ahmadabadi. "Martensitic phase transformation and shape memory properties of the as-cast NiCuTiHf and NiCuTiHfZr alloys." JOURNAL OF ALLOYS AND COMPOUNDS 888, no. 161534 (2021): 161534.
- Mohammad Sajad Mehranpour, Hamed Shahmir, Alireza Derakhshandeh, and Mahmoud Nili Ahmadabadi. "Significance of Ti addition on precipitation in CoCrFeNiMn high-entropy alloy." JOURNAL OF ALLOYS AND COMPOUNDS 888, no. 161530 (2021): 161530.
- Maryam Mohri, Farsad Forghani, and Mahmoud Nili Ahmadabadi. "Structural evolution and thermal stability of functionally graded NiTi nano-glass thin films alloys during crystallization." MATERIALS CHARACTERIZATION 187, no. 111850 (2022): 111850.
- Ali Heydarinia, Maryam Mohri, Peyman Asghari-rad, Hyoung Seop Kim, and Mahmoud Nili Ahmadabadi. "Free volume formation and the high strength of pure Mg after room temperature core-sheath ECAP passes." Journal of Materials Research and Technology-JMR&T 18, no. 1 (2022): 147-158.
- Mohammad Sajad Mehranpour, Hamed Shahmir, Peyman Asghari-rad, Mohammadreza Hosseinzadeh, Novin Rasooli, Hyoung Seop Kim, and Mahmoud Nili Ahmadabadi. "Upgrading of superior strength–ductility trade-off of CoCrFeNiMn high-entropy alloy by microstructural engineering." Materialia 22, no. 101394 (2022): 101394.
مقالات چاپ شده در نشریات داخلی
- Mahmoud Nili Ahmadabadi, and M Tabar . "Effect of Austempering and Tempering on the Microstructure andMechanical properties of 0.5% Mn Ductile Iron." Faculty of Engineering University of Tehran 30, no. 2 (1997): -.
- Mahmoud Nili Ahmadabadi, Hh Bahrami , and M Osia . "Effect of Alloying Elements and Austempering Variables on the Mechanical Properties of Ni - Cu - Mo Ductile Iron." Faculty of Engineering University of Tehran 31, no. 2 (1998): -.
- Mahmoud Nili Ahmadabadi, M Zarinezhad , and M Bahmani . "Effect of Austempering Variables on the Dimensional Stability of Austempered Ductile." Faculty of Engineering University of Tehran 34, no. 2 (2000): -.
- Mahmoud Nili Ahmadabadi, and . "Effect of partial melting homogenization on the microstructure of ductile iron." Faculty of Engineering University of Tehran 37, no. 2 (2003): -.
- بهرنگ پورگنجی , Mohammad Habibi Parsa, پیام پورنیا , and Mahmoud Nili Ahmadabadi. "Comparison of hot working behavior and microstructure change of maraging steel grad 300 without Coblat and grad 350 with Cobalt using wedge test." Journal of Financial and Management Engineering Exchange 8, no. 21 (2005): -.
- A Sheikhabdolhossein , and Mahmoud Nili Ahmadabadi. "The influence of holding time on temperature eutectic ending, duration o eutectic transformation and chemical composition of ductile iron." Faculty of Engineering University of Tehran 39, no. 6 (2005): -.
- , Mahmoud Nili Ahmadabadi, Ahad Shafiee, and T.g Langdon. "Hardening and thermal stability of a nanocrystalline CoCrFeNiMnTi0.1 high-entropy alloy processed by high-pressure torsion." IOP Conference Series: Materials Science and Engineering 194, no. 1 (2017): 012017.
- داود محمد تبار کاسگری و محمود نیلی احمدآبادی. "تاثر عملیات حرارتی آستمپرینگ و بازپخت بر ریز ساختار و خواص مکانیکی چدن نشکن 0/5 %wt منگنز." نشریه دانشکده فنی دانشگاه تهران 30، 2 (1376): 19-28.
- محمود نیلی احمدآبادی، مهدی اوصیاء و حسین حاجی بهرامی . "نق عناصر آلیاژی و و عملیات حرارتی پی در پی بر خواص مکانیکی چدن نشکن." نشریه دانشکده فنی دانشگاه تهران 31، 2 (1377): 91-98.
- محمود حیدرزاده سهی، عباس بهرامی وحدت و محمود نیلی احمدآبادی. "مطالعه تأثیر زمان و دمای آستمپرینگ بر روی چدن نشکن با مقطع ضخیم." ریخته گری 20، 62 (1378): 13-18.
- علی رضا قادری ، محمود نیلی احمدآبادی و حمیدرضا قاسمی منفردراد. "--." نشریه مهندسی متالورژی -، 16 (1382): 28-32.
- فرشید پهلوانی ، سحر سالارفر و محمود نیلی احمدآبادی. "تاثیر عوامل مختلف بر ریز ساختار آلومینیم و چدن نشکن نیمه جامد در روش سطح شیبدار." ریخته گری 25، 76 (1383): -.
- علیرضا شیخ عبدالحسین و محمود نیلی احمدآبادی. "مروری بر تشکیل و میرائی گرافیتهای کروی در چدن نشکن." ریخته گری 25، 77 (1383): 22-43.
- فرشاد اخلاقی، محمود نیلی احمدآبادی و کاوه عدالتی دانشجو . "تأثیر سیلیسیم بر منحنی های سرد شدن و ریزساختار و خواص چدن خاکستری." ریخته گری -، 76 (1383): 23-29.
- فرشاد اخلاقی، محمود نیلی احمدآبادی و کاوه عدالتی . "تاثیر سیلیسیم بر منحنی های سردشدنک ریزساختار و خواص چدن خاکستری." ریخته گری -، 77 (1383): 23.
- محمود نیلی احمدآبادی، بهرنگ پورگنجی و حسن شیرازی . "مطالعه خواص مکانیکیک ریز ساختار و رفتار پیر ختی فولاد ماراجینگ C35 بازیابی شده از قراضه فولاد ماراجینگ C3." مهندسی مالی و مدیریت اوراق بهادار -، 18 (1383): 1-30.
- سید محمد باقر خواجه باشی ، فرشاد اخلاقی و محمود نیلی احمدآبادی. "بررسی تأثیر پارامتر های تولید بر ریزساختار آلیاژَ A356 ریخته گری شده در حالت نیمه جامد- نیمه مایع." ریخته گری -، 3 (1384): 44-50.
- پیام پورنیا ، محمد حبیبی پارسا، بهرنگ پورگنجی و محمود نیلی احمدآبادی. "مقایسه رفتار کار گرم و تغییر ریز ساختار فولادهای ماراجینگ بدون کبالت رده 300 و کبالت دار رده 350 با استفاده از آزمایش کوه." مهندسی متالوژی 8، 21 (1384): -.
- محمود نیلی احمدآبادی و خواجه باشی. "بررسی تاثیر پارامتر های تولید بر ریزساختار آلیاژA356 ریخته گری شده در حالت نیمه جامد - نیمه مایع." ریخته گری -، 80 (1384): -.
- سیدمحمد باقر خواجه باشی ، فرشاد اخلاقی و محمود نیلی احمدآبادی. "وابستگی کمی بین بازو های دندریتی و گلبولها دریزساختار آلیاژ A356 ریخته گری شده در حالت نیمه جامد - نیمه مایع." مهندسی متالوژی 8، 22 (1384): 2-6.
- حمید رضا کیایی ، حسن فرهنگی، محمود نیلی احمدآبادی و حمید رضا کیایی . "تاثیر تنش اعمالی و عملیات حراراتی روی رفتار خزش در دمای محیط فولاد پر استحکام AISI 4140." مهندسی متالوژی -، 8,23 (1384): 37-42.
- علیرضا شیخ عبدالحسین و محمود نیلی احمدآبادی. "بررسی تاثیر زمان نگهداری بر ترکیب شیمیائی. دمای خاتمه و مدت زمان استحاله یوتکتیک در چدن نشکن." نشریه دانشکده فنی دانشگاه تهران -، 39و6 (1384): 821-829.
- حسن قاسمی ارمکی ، سعید حشمتی منش، حمیدرضا جعفریان و محمود نیلی احمدآبادی. "مروری بر دگرگونی های فازی در آلیاژهای بین فلزی بر مبنای گاما TiAl." مهندسی متالوژی 2، 25 (1385): 59-50.
- حسن قاسمی ارمکی ، سعید حشمتی منش، حمیدرضا جعفریان و محمود نیلی احمدآبادی. "دگرگونی های فازی و ریزساختارهای ناشی از آ نها در آلیاژ Ti - 47Al - 2Cr." نشریه دانشکده فنی دانشگاه تهران 41، 8 (1386): 1073-1080.
- مرتضی عابدینی اکارزواره ، حمیدرضا قاسمی منفردراد و محمود نیلی احمدآبادی. "بررسی اثر حافظه داری بر روی سطح سایش آلیاژ حافظه دار NiTi." مهندسی مالی و مدیریت اوراق بهادار -، --- (1388): -.
- پیمان اصغری راد، محمود نیلی احمدآبادی و حسن شیرازی. "تحولات ریزساختاری فولاد زنگنزن 304نیمه جامد شده پس از تغییرشکل پلاستیک شدید." نشریه مهندسی متالورژی 19، 1 (1395): 6-20.
- سپیده سادات حسینی نورآبادی و محمود نیلی احمدآبادی. "بررسی تاثیر ضخامت فصل مشترک بر رفتار حافظه داری و سوپر الاستیک کامپوزیت دو لایه ی نیکل- تیتانیم." نشریه مهندسی متالورژی و مواد 19، 4 (1395): 249-259.
- شیما احمدزاده سلوط، محمود نیلی احمدآبادی و حسن شیرازی. "تاثیر فرآیند تغییرشکل پلاستیک شدید نورد تکرارشونده با غلتکهای انحناءدار و صاف (RCSR) بر ریزساختار فولاد زنگ نزن 304 در دمای بالای Md30." نشریه مهندسی متالورژی و مواد 20، 1 (1396): 15-25.
- فرساد فرقانی، محمود نیلی احمدآبادی، رضا عباسچیان و حمید اسدی. "پدیده تجزیه اسپینودال در سیستم آلیاژی Ni-Alبه کمک محاسبات ترمودینامیک." نشریه مهندسی متالورژی 20، 2 (1396): 72-82.
همایشهای بینالمللی
- Mahmoud Nili Ahmadabadi, , and . "Wear of Bainitic Spheroidal Iron." Proc. of the first Conf ,of Iranian Foundarymen's Society, Tehran.
- Mahmoud Nili Ahmadabadi, , and . "Successive autempering improving mechanica properties of ductile iron in presence of MN segregatie." Mechanical Behaviour of Duetil Iron and Other Cast Metals, Kitakyushu.
- Mahmoud Nili Ahmadabadi, , and . "Control of Eutectic Carbide Precipitation and UAV Formation in 1% Mn Ductile Iron." SCI 5, Nancy.
- Mahmoud Nili Ahmadabadi. "Investgation and Control of Segregation in Ductile Iron." Proc .of the Seventh Conf,of Iranian Foundarymen's Society, Tehran.
- Mahmoud Nili Ahmadabadi, and . "Effect of Mn Content on the Mechanical Properties of Ductile Iron Treated by Successive Austempering." Proc. of the 5th word seminar of IFHT95,.
- , , and Mahmoud Nili Ahmadabadi. "Mechanical Properties of Ni-Mn-Cu Austempered Ductile Iron as a Function of Austempering Variables." Proc, of the eight Conf, of Iranian Foundarymen's Society, Tehran.
- Mahmoud Nili Ahmadabadi. "Transmission electron microscopy study of Upper Bainite in 1 wt%Mn Ductile Iron." Proc,of Steel 75 Symposium, Esfahan.
- , Mahmoud Nili Ahmadabadi, , and . "Effect Austempering variables on the Dimensional Stability of Austempered Ductile Iron." The ninth Conf. of Iranian Foundarymen?s Society, Tehran.
- , and Mahmoud Nili Ahmadabadi. "Effect of Tempering Temperature and Time on the Microstructure of Austempered Ductile Iron." The ninth Conf. of Iranian Foundarymen?s Society, Tehran.
- Mahmoud Nili Ahmadabadi, , , and . "Effect of Initial Microstucture and Austenitizing Temperature on the Dimensional Stability of Austempered Ductile Iron." The second Iranian Seminar on Surface Engineering, Tehran.
- , , and Mahmoud Nili Ahmadabadi. "The Role of Austempering Parameters on the Structure and Mechanical Properties of Heavy Section ADI." Proc. of the Second Iranian Seminar on Surface Engineering, Tehran.
- , Mahmoud Nili Ahmadabadi, , and . "Sliding Wear Behavior of Ni-Mn-Cu Austempered Ductile Iron." The second Iranian Seminar on Surface Engineering, Tehran.
- , and Mahmoud Nili Ahmadabadi. "Pin-hole Formation in Centrifugal Cast Iron Pipe and its Elimination Method." The tenth Conf. of Iranian Foundarymen?s Society, Tehran.
- , Mahmoud Nili Ahmadabadi, and . "Effect of Successive Austempering on the Mechanical Properties of Ni-Cu-Mo Ductile Iron." Proc. of the First Congress of Iranian Metallurgist Engineers Society, Tehran.
- , Mahmoud Nili Ahmadabadi, and . "The Rolling Wear Behavior of Ni-Mn-Cu Austempered Ductile Iron." Proc. of the First Congress of Iranian Metallurgist Engineers Society, Tehran.
- Mahmoud Nili Ahmadabadi, , and . "Wear Behavior of High Mn Ductile Iron Treated by Different Austempering Processes." to be appeared in the Proc. of PFAM6,.
- , and Mahmoud Nili Ahmadabadi. "The situation of ADI in the Iranian and word industry." The tenth Conf. of Iranian Foundarymen's Society, Isfahan.
- Mahmoud Nili Ahmadabadi, and . "Effect of Austempering Variable and Microstructure on the Dimensional Stability of Ductile Iron." Proc. of CIM Conf, Calgary.
- , Mahmoud Nili Ahmadabadi, and . "Effect of Composition on the Austenitizing Transformation of Ferritic Ductile Cast Iron." Proc. of the Second Congress of Iranian Metallurgist Engineers Society, Tehran.
- , Mahmoud Nili Ahmadabadi, and . "Effect of Ti on the Mechanical Properties of Co free Maraging steel melt under Ar Gas." The eleventh Conf. of Iranian Foundarymen?s Society, Tehran.
- , Mahmoud Nili Ahmadabadi, and . "Effect of Successive Austempering on the Errosion of Ductile Iron." The eleventh Conf. of Iranian Foundarymen?s Society, Tehran.
- , , and Mahmoud Nili Ahmadabadi. "Effect of Austempering Time and Temperature on the Strength of Thick Section Ductile Iron." The eleventh Conf. of Iranian Foundarymen?s Society, Tehran.
- , and Mahmoud Nili Ahmadabadi. "Effect of Isothermal and Successive Austempering on the Mechanical Properties of 4130 Steel." Proc. of Steel-77 Symposium, Tehran.
- Mahmoud Nili Ahmadabadi. "Bainitic Transformation in High Mn Austempered Ductile Iron, to Proc. of PTM ?99." Int. Conf. on Solid-Solid Phase Transformation ?99, Kyoto.
- , and Mahmoud Nili Ahmadabadi. "Effect of New Heat Treatments on the Mechanical Properties of Low Alloy High Strength Steel." Proc. of PTM ?99, Int. Conf. on Solid-Solid Phase Transformation ?99, Kyoto.
- , and Mahmoud Nili Ahmadabadi. "Investigation of duplex microstructure of tempered martensite and bainite on the mechanical properties of AISI 4130 steel." Proc. of the Third Congress of Iranian Metallurgist Engineers Society,.
- , and Mahmoud Nili Ahmadabadi. "Investigation of microstructure, Mechanical property and fatigue behavior of alloyed ductile iron austempered by different processes." Proc. of the Third Congress of Iranian Metallurgical Engineers Society,.
- Mahmoud Nili Ahmadabadi, and . "Effects of Chemical Composition and Heat Treatment Variables on the Kinetics of Ductile Iron Austenitization." Thermec 2000, Las Vegas.
- , and Mahmoud Nili Ahmadabadi. "Austenitization kinetics in unalloyed and alloyed ferritic ductile iron." The 12th Conf. of Iranian Foundarymen?s Society, Tehran.
- , Mahmoud Nili Ahmadabadi, and . "Effect of inoculants and module of casting on the shrinkage behavior of unalloyed iron." The 12th Conf. of Iranian Foundarymen?s Society, Tehran.
- , and Mahmoud Nili Ahmadabadi. "Kintics of austempering phase transformation in alloyed ductile iron and its effects on the fracture mechanism." The 12th Conf. of Iranian Foundarymen?s Society, Tehran.
- , Mahmoud Nili Ahmadabadi, and . "Investigation on the microstructure and mecanichal properties of cast Ni-Mo- Mn maraging steel." The 12th Conf. of Iranian Foundarymen?s Society, Tehran.
- , Mahmoud Nili Ahmadabadi, and . "Effect of chemical composition, inoculants and module of casting on the shrinkage behavior of ductile iron." Proc. of the fourth Congress of Iranian Metallurgical Engineers Society,.
- , , and Mahmoud Nili Ahmadabadi. "Simulation of ferritic ductile iron austenitization." Proc. of the fourth Congress of Iranian Metallurgical Engineers Society,.
- , and Mahmoud Nili Ahmadabadi. "Effect of austenitization of ferritic iron on the mechanical properties of austempered ductile iron, and alloyed ferritic ductile iron." Proc. of the fourth Congress of Iranian Metallurgical Engineers Society,.
- , and Mahmoud Nili Ahmadabadi. "Control and modeling of bainitic transformation in ductile iron aided by austempering treatment of steels with equivalent chemical , Materials Design Approaches and Experiences as held during the TMS Fall Meeting." Indianapolis,.
- , Mahmoud Nili Ahmadabadi, and Mohammad Javad Yazdanpanah. "Adaptive robust force tracking impedance control of redundant manipulators based on sliding mode control." in the Proceedings of ICAR 2003, The 11th International Conference on Advanced Robotics,.
- Reza Alimardani, , and Mahmoud Nili Ahmadabadi. "Desigh and Development of Robot's Manipulator Mechanism for harvesting Saffron(Crocus Sativus)." Engineering The Future, Leuven.
- Farshad Akhlaghi, Mahmoud Nili Ahmadabadi, and . "Influence of pouring conditions in the inclined plate process and reheating on the." 8th international Conference on Semi-Solid Processing, Limassol.
- Mahmoud Nili Ahmadabadi, Farshad Akhlaghi, and . "THE INCLINED PLATE PROCESS AND REHEATING ON THE MICROSTRUCTURE OF THE SEMI-SOLID A356ALUMINUM ALLOY." 8th int. Conf. on Semi-solid processing,.
- , Seyed Mahdi Fakhrai, and Mahmoud Nili Ahmadabadi. "Improving morphological filters by intelligent algorithms." Conf. Computational Intelligence, Tehran.
- Mohammad Habibi Parsa, , and Mahmoud Nili Ahmadabadi. "THE PREDICTION OF PROCESS PARAMETER EFFECTS ON FLOW FORMABILITY IN HIGH STRENGTH STEELS USING SIMULATION." International Conference on Recent Advances in Mechanical & Materials Engineering, Kuala Lumpur.
- Mahmoud Nili Ahmadabadi. "Influence of pouring conditions in the inclined plate process and reheating on the microstructure of the semi-solid A356 aluminum alloy." 8th Conf. on semi-solid processing,.
- Mahmoud Nili Ahmadabadi. "DENDRITIC-GlOBULAR STRUCTURE TRANSITION OF DUCTILE IRON INSEMI-SOLID CASTING USING COOLING SLOPE PLATE." 8th Conf. on semi-solid processing,.
- Mahmoud Nili Ahmadabadi, Reza Mahmuodi, , and . "Improvement of mechanical properties in a nano-structured Fe-Ni-Mn steel prepared by heavy plastic deformation." Nanostructured Materials by High Pressure Severe Plastic Deformation, Donetsk.
- Mohammad Habibi Parsa, , and Mahmoud Nili Ahmadabadi. "Tube Flow formability simulation." 8th ICTP ? Int. Conference on Technology of Plasticity, Verona.
- , Mahmoud Nili Ahmadabadi, Hamid Reza Ghasemi Monfared Rad, and . "Austempered Cast Iron: an alternative for brake shoe materials." first International Congress on Manufacturing Engineering (TICME2005, Tehran.
- Mohammad Habibi Parsa, , and Mahmoud Nili Ahmadabadi. "Flow formability simulation of high strength steels, investigation of feed rate effect." Tehran International Congress on Manufacturing Engineering (TICME2005), Tehran.
- Mohammad Habibi Parsa, , and Mahmoud Nili Ahmadabadi. "Flow formability simulation of high strength steel, investigation of feed rate." TICME 2005, Tehran.
- , , Seyed Mahdi Fakhrai, and Mahmoud Nili Ahmadabadi. "SOPC-based genetic algorithm implementation." 14th Iranian Conf. Electrical Engineering (ICEE2006), Tehran.
- , , Seyed Mahdi Fakhrai, and Mahmoud Nili Ahmadabadi. "SOPC-based parallel genetic algorithm." 14th Iranian Conf. Electrical Engineering, Tehran.
- Seyed Mahdi Fakhrai, , and Mahmoud Nili Ahmadabadi. "Two-stage morphological filter design using genetic algorithms." IEEE Int. Conf. Engineering of Intelligent Systems (ICEIS06, Islamabad.
- , , , Seyed Mahdi Fakhrai, and Mahmoud Nili Ahmadabadi. "A representation for genetic-algorithm-based multiprocessor task scheduling." 2006 IEEE World Congress Computational Intelligence, Vancouver.
- Hasan Farhangi, , Mahmoud Nili Ahmadabadi, and Jafar Rasi Zadeh Ghani. "Numerical simulation and experimental measurement of residual stress in steel casting." International conference on manufacturing science and technology ICOMAST2006,.
- Mahmoud Nili Ahmadabadi, , and . "The effect of cooling rate on transformation behavior of Ni-rich NiTi shape memory alloy." 5th Int. Conf.on MP3 2006, Singapore.
- , Mahmoud Nili Ahmadabadi, , Shahram Raygan, and . "The Effect of chemical composition on transformation behavior of NiTi shape memory alloy prepared by vacuum arc melting." The 5th international conference on materials processing for properties and performance(5th mp3), Singapore.
- Mahmoud Nili Ahmadabadi, , , Shahram Raygan, and . "Reclamation of NiTi orthodontic wires Prepared by vacuum arc melting technique." 5th Int. Conf.on MP3 2006, Singapore.
- Mahmoud Nili Ahmadabadi, , and . "Mechanism of Ultrafine Grain Formation during Cold Rolling and Aging of Lath Martensite in a maraging steel." First international congress on nanoscience and nanotechnology, Tehran.
- Mahmoud Nili Ahmadabadi, , , , and Hasan Shirazi. "mechanical properties of nano-scale grains maraging steel prepared by ECAP process." First international congress on nanoscience and nanotechnology, Tehran.
- , Mahmoud Nili Ahmadabadi, and Caro Lucas. "Bayesian Continuous-State Reinforcement Learning." 12th International CSI Computer Conference (CSICC'07), Tehran.
- Mohammad Habibi Parsa, , , and Mahmoud Nili Ahmadabadi. "Finite Element Analysis of Hybrid Rotary Friction Welding and investigating the Effect of Pressure on Variation of Temperature and Strain Values." International Welding and Joining Conference, Seoul.
- , Mahmoud Nili Ahmadabadi, , , and . "Phase Transformation Behavior of Ni-rich and Reclaimed NiTi Shape Memory Alloy Prepared by Vacuum Arc Remelting." 11th World Conference on Titanium (Ti-2007), Kyoto.
- Mohammad Habibi Parsa, , , and Mahmoud Nili Ahmadabadi. "Thermo-Mechanical Calculations of Hybrid Rotary Friction Welding at Equal Diameter Copper Bars and Effects of Essential parameters on Dependent Special Variables." The 9th International Conference on Numerical Methods in Industrial Forming Processes, Porto.
- , , Mahmoud Nili Ahmadabadi, and Caro Lucas. "Modelling Sensoric Reliability Factors in the Form of Trust Functions for Learning via Evolutionary Algorithm." 7th Iranian Conference on Fuzzy Systems; and 8th conference on Intelligent Systems, Mashad.
- , , , , and Mahmoud Nili Ahmadabadi. "Electrochemical corrosion of oxidized gamma titanium Alominide in ringrers solution." 1st Int. Conf. on Biomaterials, BRC, Tehran.
- , Mahmoud Nili Ahmadabadi, , , and . "Superelastic Behavior of Ti-50.7at%Ni Shape Memory Alloy Using Three Point Bending Study." 1st Int. Conf. on Biomaterials, BRC, Tehran.
- Mahmoud Nili Ahmadabadi, , , Mohammad Habibi Parsa, , and . "The Superelastic Property Evolution of NiTi Orthodontic Archwire Using Modified Bending Test." 1st Int. Conf. on Biomaterials, BRC, Tehran.
- Mohammad Habibi Parsa, , , Abbas Zarei Hanzki, and Mahmoud Nili Ahmadabadi. "A Form-Invariant Polynomial Constitutive Equation for Hot Deformation of Metals." The third international IMS conference on applications of traditional and high performance material in harsh environments, IMS/3, Sharjah.
- Hamid Reza Ghasemi Monfared Rad, , and Mahmoud Nili Ahmadabadi. "Effect of Temperature on the Wear Behavior of NiTi Alloy against 52100 Steel and WC." International Conference on Emerging Research and Advances in Mechanical Engineering, ERA,.
- Mahmoud Nili Ahmadabadi, Hadi Ghasemi Nansa, and . "Mechanical properties of Fe -10Ni -7Mn martensitic steel subjected to severe plastic deformation via cold rolling and wire drawing." 15th International Conference on the Strength of Materials, ICSMA 15, Dresden.
- Seyed Vahid Seyed Vakili, and Mahmoud Nili Ahmadabadi. "On the filling of semi-solid during thixocasting." 12th International Conference on Semi-Solid Processing of Alloys and Composites,.
- Peyman Asghari-rad, Hassan Shirazi, Sebastian Koldorf, and Mahmoud Nili Ahmadabadi. "Microstructure evolution of an Austenitic Stainless Steel severely deformed by the repetitive corrugation and straightening by rolling and subsequent annealing." 5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15, Tehran.
- Peyman Asghari-rad, Mahmoud Nili Ahmadabadi, and Hassan Shirazi. "The Effect of "Repetitive Corrugation and Straightening by Rolling" (RCSR) Process on the Semi-solid Microstructure of A356 Aluminum Alloy." Proceedings of Iran International Aluminum Conference (IIAC2016), Tehran.
- Hamidreza Koohdar, Hamidreza Jafarian, Faezeh Javadzadeh Kalahroudi, Mahmoud Nili Ahmadabadi, T.g Langdon, and Yi Huang. "Effect of high-pressure torsion on the microstructural evolution and mechanical properties of an Fe-10Ni-7Mn (wt. %) lath martensitic steel." 6th International Biennial Conference on Ultrafne Grained and Nanostructured Materials, Kish.
- Shima Ahmadzadeh, Hassan Shirazi, and Mahmoud Nili Ahmadabadi. "Fine grained 304 ASS processed by a severe plastic deformation and subsequent annealing; microstructure and mechanical properties evaluation." 6TH INTERNATIONAL BIENNIAL CONFERENCE ON ULTRAFINE GRAINED AND NANOSTRUCTURED MATERIALS: (UFGNSM2017), Kish.
- Mahmoud Nili Ahmadabadi, and . "hydrogen storage properties in heavily deformed pure mg by ecap at room temperature." 31th international conference on metallurgy and materials,.
- نیلوفر حبیبی، محمود نیلی احمدآبادی و امیر سیف الدینی. "بررسی تأثیر شرایط عملیات حرارتی آنیل بر رفتار مکانیکی یک فلز شیشهای حجیم پایۀ آهن." ششمین همایش مشترک انجمن مهندسین متالورژی و انجمن علمی ریخته گری ایران، تهران.
عضویت در مجامع ملی و بینالمللی
