Executive Activities
- Dean of the Nondestructive testing lab, 2017/04/10, 2019/04/10, Iran, Tehran
- Dean of the Manufacturing and Production Group, School of Mechanical Engineering, 2018/05/12, 2020/05/11, Iran, Tehran
- Member of the Faculty Employment Committee, 2018/07/25, 2020/07/24, Iran, Tehran
- Dean of the Mechanical Engineering Group-Manufacturing and Production, Alborz, 2019/04/21, 2021/04/21, Iran, Tehran
- Expert Member at the University of Tehran Science & Technology Park, 2020/12/08, 2021/12/09, Iran, Tehran
Papers in International Journals
- Mohammadreza Farahani, and Iraj Sattari Far . "Effects of residual stresses on crack - tip constraints." SCIENTIA IRANICA 18, no. 6 (2011): 1267-1276.
- Mohammadreza Farahani, Iradj Sattari Far , and Davood Akbari. "Numerical and experimental investigations of effects of residual stresses on crack behavior in Aluminum 6082 - T6." Journal of Mechanical Engineering Science 226, no. 9 (2012): 2178-2191.
- Mohammadreza Farahani, Iraj Sattari Far , Davood Akbari , and Rene Alderliesten . "Effect of residual stresses on crack behaviour in single edge bending specimens." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES -, no. --- (2012): 1-12.
- Davood Akbari , Mohammadreza Farahani, and Naser Soltani. "Effects of the weld groove shape and geometry on residual stresses in dissimilar butt-welded pipes." JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN 47, no. 2 (2012): 73-82.
- Davood Akbari, Naser Soltani, and Mohammadreza Farahani. "Numerical and experimental investigation of defect detection in polymer materials by means of digital shearography with thermal loading." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 3, no. 227 (2013): 430-442.
- Ghadir Nourollahi, Mohammadreza Farahani, Ali Babakhani, and Saeed Mirjavadi. "Compressive deformation behavior modeling of AZ31 magnesium alloy at elevated temperature considering the strain effect." Materials Research-Ibero-american Journal of Materials 8, no. 16 (2013): 130-136.
- Mohammad Khoran, Pouyan Ghabezi, Mohammadreza Farahani, and Mohammad Kazem Besharati Givi. "Investigation of drilling composite sandwich structures." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 76, no. 76 (2014): 1937-1936.
- Setayesh Hakak-zargar, Mohammadreza Farahani, and Mohammad Kazem Besharati Givi. "Numerical and experimental investigation on the effects of submerged arc welding sequence on the residual distortion of the fillet welded plates." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 1, no. 230 (2015): 150.
- Majid Sabokroh, Hojat Hashemi, and Mohammadreza Farahani. "Experimental study of the weld microstructure properties in assembling of natural gas transmission pipelines." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 229, no. 4 (2015): 580-590.
- Hasan Mohammadzadeh Jamalian, Mohammadreza Farahani, Mohammad Kazem Besharati Givi, and Mohamad Aghaei Vafaei. "Study on the effects of friction stir welding process parameters on the microstructure and mechanical properties of 5086-H34 aluminum welded joints." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 83, no. 1-4 (2015): 611-621.
- Mohammadreza Farahani, Setayesh Hakak-zargar, and Davood Akbari. "Investigation on the Effects of the Weld Groove Shape on the Residual Stress Formation in the Butt-Welded Plates." SCIENTIA IRANICA 23, no. 5 (2015): 2230-2237.
- Mohammad Tabasi, Mohammadreza Farahani, Mohammad Kazem Besharati Givi, Mohammad Farzami, and Ali Moharami. "Dissimilar friction stir welding of 7075 aluminum alloy to AZ31 magnesium alloy using SiC nanoparticles." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 90, no. 2 (2015): 250.
- Pouyan Ghabezi, Mohammadreza Farahani, and Mohammad Hosseini Fakhr. "Experimental Investigation of Nano-Alumina Effect on the Filling Time in Vartm Process." Journal of Fundamental and Applied Sciences 8, no. 2 (2016): 925-940.
- Pouyan Ghabezi, and Mohammadreza Farahani. "Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles." Journal of computational applied mechanics 47, no. 2 (2016): 231-239.
- Pouyan Ghabezi, and Mohammadreza Farahani. "Experimental investigation of nanoparticles effects on cohesive model and bridging laws of mode I fracture in the adhesive joints." JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY 31, no. 16 (2017): 1807-1823.
- Mohammadreza Kaji, Mohammadreza Farahani, and Mahdi Ansari. "A reinforcing technique for the adhesive bonded composite joints using metallic wires." JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY 31, no. 17 (2017): 1963-1975.
- Mojtaba Rezaee Hajideh, Mohammadreza Farahani, Seyed Amir Davoud Alavi, and Navid Molla Ramezani. "Investigation on the effects of tool geometry on the microstructure and the mechanical properties of dissimilar friction stir welded polyethylene and polypropylene sheets." Journal of Manufacturing Processes 26, no. 26 (2017): 269-279.
- Mojtaba Rezaee Hajideh, Mohammadreza Farahani, and Masoud Ahmad Khanbeigi. "A Hybrid Thermal Assisted Friction Stir Welding Approach for PMMA sheets." Modern Applied Science 6, no. 2 (2017): 51-60.
- Omid Sam Daliri, Mohammadreza Farahani, and Majid Farhang. "A combined numerical and statistical analysis for prediction of critical buckling load of the cylindrical shell with rectangular cutout." Engineering Solid Mechanics 7, no. 1 (2017): 35-46.
- Fayyaz Nosouhi, Mohammadreza Farahani, and Mahdi Ansari. "Experimental and numerical study on the composite adhesive joint reinforcement using wavy edge." JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY 32, no. 9 (2017): 1007-1017.
- Hossein Tavakolli, Mohammadreza Farahani, and Majid Sohrabian. "Process analysis of resistance spot welding on the Inconel alloy 625 using artificial neural networks." International Journal of Manufacturing Research 12, no. 4 (2017): 444-460.
- Pouyan Ghabezi, and Mohammadreza Farahani. "Effects of Nanoparticles on Nanocomposites Mode I and II Fracture." Reviews of Adhesion and Adhesives 5, no. 4 (2017): 414-435.
- Moeen Enami, Mohammadreza Farahani, and Majid Farhang. "Novel study on keyhole less friction stir spot welding of Al 2024 reinforced with alumina nanopowder." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 100, no. 01 (2018): 110-124.
- Omid Sam Daliri, Lisa-marie Faller, Mohammadreza Farahani, Ali Roshanghias, Hannes Oberlercher, Tobias Mitterer, Alireza Araee, and Hubert Zangl. "MWCNT–Epoxy Nanocomposite Sensors for Structural Health Monitoring." Electronics 7, no. 8 (2018): 143.
- Majid Sabokroh, and Mohammadreza Farahani. "Experimental study of the residual stresses in girth weld of natural gas transmission pipeline." journal of applied and computational mechanics 5, no. 2 (2018): 199-206.
- Pouyan Ghabezi, and Mohammadreza Farahani. "Trapezoidal traction–separation laws in mode II fracture in nano-composite and nano-adhesive joints." JOURNAL OF REINFORCED PLASTICS AND COMPOSITES 37, no. 11 (2018): 780-794.
- Hossein Andalib, Mohammadreza Farahani, and Moeen Enami. "Study on the new friction stir spot weld joint reinforcement technique on 5754 aluminum alloy." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 232, no. 17 (2018): 2976-2986.
- Mojtaba Rezaee Hajideh, Mohammadreza Farahani, and Omid Shapoorgan. "Comprehensive Investigation on the Mechanical Properties of Friction Stir Composite Joint from Polyethylene - Polypropylene." International Journal of Manufacturing Research 13, no. 3 (2018): 1.
- Mojtaba Rezaee Hajideh, Mohammadreza Farahani, and Navid Molla Ramezani. "Reinforced Dissimilar Friction Stir Weld of Polypropylene to Acrylonitrile Butadiene Styrene with Copper Nanopowder." Journal of Manufacturing Processes 32, no. 1 (2018): 445-454.
- Pouyan Ghabezi, and Mohammadreza Farahani. "Characterization of cohesive model and bridging laws in mode I and II fracture in nanocomposite laminates." JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES 12, no. 4 (2018): 4329-4355.
- Omid Sam Daliri, Lisa-marie Faller, Mohammadreza Farahani, Ali Roshanghias, Alireza Araee, Majid Baniassadi, Hannes Oberlercher, and Hubert Zangl. "Impedance analysis for condition monitoring of single lap CNT-epoxy adhesive joint." INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES 88, no. 1 (2019): 59-65.
- Mohammad Ebrahimi, Mohammadreza Farahani, and Davood Akbari. "The influences of the cyclic force magnitude and frequency on the effectiveness of the vibratory stress relief process on a butt welded connection." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 101, no. 1 (2019): 20-211.
- Farhad Heydarpour, Mohammadreza Farahani, and Pouyan Ghabezi. "Experimental investigation of the effects of adhesive defects on the single lap joint strength." INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES 80, no. 1 (2019): 128-132.
- Majid Sabokroh, and Mohammadreza Farahani. "Correlation between the Weld Residual Stresses and its Tensile and Impact Strength." journal of applied and computational mechanics 5, no. 4 (2019): 727-734.
- Davood Rahmatabadi, Ali Shahmirzaloo, Mohammadreza Farahani, Mohammad Tayyebi, and Ramin Hashemi. "Characterizing the elastic and plastic properties of the multilayered Al/Brass composite produced by ARB using DIC." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 753, no. 1 (2019): 70-78.
- Davood Rahmatabadi, Ali Shahmirzaloo, Ramin Hashemi, and Mohammadreza Farahani. "Using digital image correlation for characterizing the elastic and plastic parameters of ultrafine-grained Al 1050 strips fabricated via accumulative roll bonding process." Materials Research Express 6, no. 8 (2019): 086542.
- Mojtaba Rezaee Hajideh, Mohammadreza Farahani, Mohammadjavad Pakravan, and Ali Shahmirzaloo. "Corrosion resistance and hydrophilic properties of plasma sprayed Ni+5%Al coatings." Heliyon 5, no. 6 (2019): e01920.
- Pouyan Ghabezi, and Mohammadreza Farahani. "A cohesive model with a multi-stage softening behavior to predict fracture in nano composite joints." ENGINEERING FRACTURE MECHANICS 219, no. 1 (2019): .
- Pouyan Ghabezi, Mohammadreza Farahani, Ali Shahmirzaloo, Hamid Ghorbani, and N M Harrison. "Defect evaluation of the honeycomb structures formed during the drilling process." INTERNATIONAL JOURNAL OF DAMAGE MECHANICS 29, no. 3 (2020): 454-466.
- Navid Molla Ramezani, Behnam Davoodi, Mohammadreza Farahani, and Abolfazl Hossein Khanli. "Surface integrity of metal matrix nanocomposite produced by friction stir processing (FSP)." Journal of the Brazilian Society of Mechanical Sciences and Engineering 41, no. 11 (2020): 502.
- Mahdi Amiri, and Mohammadreza Farahani. "Adhesive composite joint reinforcement using button shape interlocking features." INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES 102, no. 1 (2020): 102651.
- Omid Sam Daliri, Mohammadreza Farahani, Lisa-marie Faller, and Hubert Zangl. "Structural health monitoring of defective single lap adhesive joints using graphene nanoplatelets." Journal of Manufacturing Processes 55, no. 1 (2020): 119-130.
- Amir Safari, Mohammadreza Farahani, and Pouyan Ghabezi. "Experimental Study on the influences of different surface treatment processes and adhesive type on the aluminum adhesive-bonded joint strength." MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES 49, no. 1 (2020): .
- Alireza Zaheri, Mohammadreza Farahani, Alireza Sadeghi, and Naser Souri. "Transient liquid phase bonding of Cu and Al using metallic particles interlayers." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 20, no. 1 (2021): 095440542098823.
- Omid Sam Daliri, Lisa-marie Faller, Mohammadreza Farahani, and Hubert Zangl. "Structural health monitoring of adhesive joints under pure mode I loading using the electrical impedance measurement." ENGINEERING FRACTURE MECHANICS 245, no. 1 (2021): 107585.
- Majid Farhang, Omid Sam Daliri, Mohammadreza Farahani, and Azadeh Vatani. "Effect of friction stir welding parameters on the residual stress distribution of Al-2024-T6 alloy." JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES 15, no. 1 (2021): 7684-7694.
- Sadegh Hoseinlaghab, Mohammadreza Farahani, and Majid Safarabadifarahani. "Improving the impact resistance of the multilayer composites using nanoparticles." MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES 20, no. 1 (2021): 1-17.
- Ali Shahmirzaloo, Mohammadreza Farahani, and Majid Farhang. "Evaluation of local constitutive properties of Al2024 friction stir-welded joints using digital image correlation method." JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN 56, no. 7 (2021): 419-429.
- Pouriya Meshkizadeh, and Mohammadreza Farahani. "Developing effective thermal signal processing to improve thermographic non-destructive inspection of metallic components." Nondestructive Testing and Evaluation 37, no. 4 (2022): 367-385.
- Sadegh Hoseinlaghab, Mohammadreza Farahani, Majid Safarabadifarahani, and S. S. Jalali. "Comparison and identification of efficient nanoparticles to improve the impact resistance of glass/epoxy laminates: Experimental and numerical approaches." MECHANICS OF ADVANCED MATERIALS AND STRUCTURES 29, no. 6 (2022): 1-16.
- MILAD MOHAMMADIAN, Akbari Davood, Mohammadreza Farahani, and Pouya Faraji Kalajahi. "Nondestructive inspection of gas turbine blades by active thermography using different fluids." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 236, no. 12 (2022): 1553-1563.
- Amirreza Ardebili, and Mohammadreza Farahani. "Delamination Defect Evaluation in CFRP Composite Patches by the Use of Active Thermography." JOURNAL OF NONDESTRUCTIVE EVALUATION 41, no. 3 (2022): .
- Sadegh Hosein laghab shobi, Mohammadreza Farahani, Majid Safarabadifarahani, and Majid Nikkhah. "Tension-after-impact analysis and damage mechanism evaluation in laminated composites using AE monitoring." MECHANICAL SYSTEMS AND SIGNAL PROCESSING 186, no. 1 (2023): 109844.
- Mojtaba Rezaee Hajideh, and Mohammadreza Farahani. "Direct laser metal deposition cladding of IN718 on DIN 1.2714 tool steel reinforced by the SiC nanoparticles." Journal of Materials Research and Technology-JMR&T 23, no. 1 (2023): 2020-2030.
Papers in National Journals
- Majid Sabokroh, Hojat Hashemi, and Mohammadreza Farahani. "Investigation on the Relation Between the Microstructure, Mechanical Properties and Residual Stress...." journal of Petroleum Research 24, no. 76 (2013): .
- Hojat Hashemi, Majid Sabokroh, and Mohammadreza Farahani. "Investigation on the Weldability of the Circumferential Multipass Welded . . . ." Mechanical Engineering modares 13, no. 4 (2013): 60-73.
- Setayesh Hakak-zargar, Mohammadreza Farahani, and Mohammad Kazem Besharati Givi. "Investigation on the Effects of Welding Parameters on the Submerged Arc Welding Efficiency." Mechanical Engineering modares 13, no. 12 (2013): 79-87.
- Pouyan Ghabezi, Mohammadreza Farahani, and Mohammad Kazem Besharati Givi. "Optimization of drilling process on corrugated core sandwich panels." Mechanical Engineering modares 15, no. 13 (2015): 107-112.
- Fayyaz Nosouhi, Mohammadreza Farahani, and Mahdi Ansari. "Investigation on the effect of wave shape and number on the strengthening of wavy adhesive joints." Journal of Manufacturing Engineering 20, no. 3 (2016): 37.
- Mohammadreza Kaji, Mohammadreza Farahani, and Mahdi Ansari. "Investigation on the effects of the number and diameter of the wires on the strength of the reinforced adhesive joint of composites." Journal of Manufacturing Engineering 20, no. 4 (2016): 28.
- Pouyan Ghabezi, Mohammadreza Farahani, Mohammad Hosseini Fakhr, and Hamid Abroshan. "Investigation of Mechanical Behavior of Alfa and Gamma Nano- Alumina/Epoxy Composite Made By Vartm." INTERNATIONAL JOURNAL OF ADVANCED BIOTECHNOLOGY AND RESEARCH 7, no. 3 (2016): 731-736.
- Majid Sabokroh, Hojat Hashemi, and Mohammadreza Farahani. "Investigation on the Effects of Residual Stresses on the Static and Fracture Stresngth of the Weld-zone ...." journal of Petroleum Research 26, no. 86 (2016): 63.
- Ali Zohrehvand, and Mohammadreza Farahani. "Cladding of Carbon Steel with Aluminum Stainless Layer Using Friction Stir Welding Method." Mechanical Engineering modares 99, no. 9 (2017): 1-11.
- Omid Sam Daliri, and Mohammadreza Farahani. "Characterization of Stress Concentration in Thin Cylindrical Shells with Rectangular Cutout Under Axial Pressure." International Journal Of Advanced Design And Manufacturing Technology 2, no. 10 (2017): 133-143.
- M.. Eftekhari, Mahdi Ahmadi Najafabadi, and Mohammadreza Farahani. "Evaluation of Ultrasonic Method Capability in Measurement of Longitudinal Welding Residual Stress through Thickness." Journal of solid and fluid mechanis 8, no. 3 (2018): 29-47.
- Majid Sabokroh, and Mohammadreza Farahani. "Simulation of the Residual Stresses Distribution in Girth Weld of Gas Transmission Pipeline." Mechanical Engineering modares 19, no. 1 (2018): 223-228.
- Ali Shahmirzalo, and Mohammadreza Farahani. "Determination of local constitutive properties of aluminum using digital image correlation: A comparative study between uniform stress and virtual fields." International Journal Of Advanced Design And Manufacturing Technology 12, no. 01 (2018): 9-18.
- Amir Safari, and Mohammadreza Farahani. "Comparison of the effects of shotblasting and sandblasting processes on the strength of the aluminum adhesive bonded joints." Amirkabir Journal of Mechanical Engineering 50, no. 5 (2018): 1015-1022.
- Majid Sabokroh, and Mohammadreza Farahani. "Mathematical modeling of residual stress distribution in girth welding of high strength low alloy steel gas pipelines." Mechanical Engineering modares 18, no. 04 (2018): 990-996.
- Pouyan Ghabezi, and Mohammadreza Farahani. "Influence of Planar Discontinuities on the Sheet Adhesive Joint Strength." Structural Engineering 5, no. 2 (2018): 172-183.
- Amir Safari, and Mohammadreza Farahani. "Study on the Effects of Sanding on the Strength of the Adhesive Joints." Amirkabir Journal of Mechanical Engineering 50, no. 3 (2018): 619-626.
- Mahdi Vakili, Mohammadreza Farahani, and Abolfazl Khalkhali. "Finite Element Crushing Analysis, Neural Network Modelling and Multi-Objective Optimization of the Honeycomb Energy Absorbers." International Journal Of Advanced Design And Manufacturing Technology 11, no. 1 (2018): 51-59.
- [] [], Mahdi Ahmadi, and Mohammadreza Farahani. "Evaluation of longitudinal residual stress variations along the thickness of welded joint of 5086 aluminum alloy." Journal of solid and fluid mechanis 7, no. 3 (2018): 1-16.
- Majid Sabokroh, and Mohammadreza Farahani. "Analysis of Variance of Residual Stress Distribution in Girth Welding of High Strength Low Alloy Steel Gas Pipeline." Mechanical Engineering modares 19, no. 7 (2019): 1789-1795.
- Reza Khoshkbari Rezaieh, Mohammadreza Farahani, Majid Safarabadifarahani, and Saeed Asghari. "Using of Modulated Thermography for Nondestructive Testing of Polymer Plates." Nondestructive Testing Technology 2, no. 4 (2019): 38-45.
- Mohammad Amin Foroutan Moharami, Faramarz Ashenai Gasemi, and Mohammadreza Farahani. "Experimental Analysis of GTAW Welding Parameters Effects on the Mechanical and Metallurgical Properties of ST37 Carbon Steel- AISI304 Stainless Steel Dissimilar Welded Joints." Journal of Mechanical Engineering University of Tabriz 49, no. 02 (2019): 229-238.
- Majid Sabokroh, and Mohammadreza Farahani. "Experimental investigation of the Annealing Effect on the Mechanical Properties of Girth Welding Using Nanoparticles on Gas Transmission Pipeline." Mechanical Engineering modares 20, no. 5 (2020): 1107-1113.
- Mohammadjavad Pakravan, and Mohammadreza Farahani. "Evaluation of Damage in Composite Laminated Sheets with Circular Defects under Tensile Loading Using Digital Image Correlation Method." Mechanical Engineering modares 20, no. 4 (2020): 1024-1031.
- Amirreza Ardebili, Mohammadreza Farahani, and Saeed Asghari. "Thermography with Radiation Excitation for Non-Destructive Evaluation of Composite and Sheet Metal." Nondestructive Testing Technology 2, no. 5 (2020): 3.
- Mohammad Mostafa Khalili, Mohammadreza Farahani, and Saeed Asghari. "Thermography of the cooling channels using steam heating." Journal of Manufacturing Engineering 7, no. 1 (2020): 39-44.
- Amirhossein Zamanpour, Mohammadreza Farahani, Majid Farhang, and Navid Vafa. "Experimental Study on the Effects of Harmonic Vibration on the Stress Relief of the Butt Welded AISI 1021 Pipes." Journal of Manufacturing Engineering 7, no. 2 (2020): 1-7.
- Alireza Ahmadi, Mohammadreza Farahani, and Amirreza Ardebili. "Applying pulse thermography technique for corrosion defect evaluation on the steel plates." Journal of Manufacturing Engineering 7, no. 5 (2020): 24-32.
- Amirreza Ardebili, and Mohammadreza Farahani. "Identification of Delamination Defects in Metal-Composite Shells Using Pulse Thermography." Mechanical Engineering modares 20, no. 9 (2020): .
- Pouriya Meshkizadeh, Mohammadreza Farahani, Mojtaba Rezaei, and Mohammad Heidari-Rarani. "Implementing Thermal Image Processing Techniques for Enhancing the Detectability of Defects in Thermography of Additive Manufacturing Components." Nondestructive Testing Technology 2, no. 6 (2020): 36-45.
- Ali Mohammad Kolagar Kolagar, Mohammad Cheraghzadeh, Akbari Davood, and Mohammadreza Farahani. "Nondestructive Evaluation of Gas Turbine Blade Cooling Holes Blockage by Thermography." Nondestructive Testing Technology 2, no. 6 (2021): 46-52.
- Pouriya Meshkizadeh, Mojtaba Rezaee Hajideh, Mohammadreza Farahani, and Mohammad Heidari-Rarani. "Thermal Signal Reconstruction and Empolyment of K Clustering Method for Inspection of Additive Manufactured Polymer Parts." Nondestructive Testing Technology 2, no. 7 (2021): 60-69.
- Omid Sam Daliri, and Mohammadreza Farahani. "Condition monitoring of defective single lap adhesive joint using carbon nanotubes." Amirkabir Journal of Mechanical Engineering 53, no. 2 (2021): 1321-1330.
- Majid Farhang, Mohammadreza Farahani, and [] []. "Incorporation of Al2O3 powder for improvement of the mechanical and metallurgical properties of multi-passes friction stir welding of Al 2024." Journal of Manufacturing Engineering 8, no. 3 (2021): 35-46.
- Sadegh Hoseinlaghab, Mohammadreza Farahani, and Majid Safarabadifarahani. "Investigation on the Reinforcing Effects of Using Nanoparticle on Quasi-Static Loading of the Glass-Epoxy Composites." Mechanical Engineering modares 21, no. 8 (2021): .
- Ali Asadi, Mohammadreza Farahani, Shobo Salehpour, and Hossein Yosafi. "Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale." Iranian journal of wood and paper industries (IJWP) 12, no. 3 (2021): 419-428.
- Majid Farhang, Mohammadreza Farahani, and Moeen Enami. "Experimental Study on the Effects of Friction Stir Spot Welding Process Parameters on the AL2024T3 Joint Strength." International Journal Of Advanced Design And Manufacturing Technology 14, no. 4 (2021): 105-112.
- Mohammadjavad Pakravan, Mohammadreza Farahani, Amin Barzegar, and Mahdi Mahmoudi. "Nondestructive evaluation of impact area on glass fiber reinforced polymer composite by digital image correlation method: experimental study." Mechanical Engineering modares 22, no. 3 (2022): 179-190.
- Keyhan Nategh, and Mohammadreza Farahani. "Improving the Nondestructive Thermography Inspection Results for Detection of Circular Defects in Coated Metals Using Principal Component Analysis." Nondestructive Testing Technology 2, no. 9 (2022): 33-40.
- Pouria Shahfaragh, Mohammadreza Farahani, Majid Safarabadifarahani, and Majid Farhang marani. "Experimental and numerical investigation of the vibration stress relief process on a T- shape welded joint." Journal of Manufacturing Engineering 9, no. 1 (2022): 43-53.
- Keyhan Nategh, and Mohammadreza Farahani. "Evaluating the Circular Defect Detection Capability in Thermography Testing by the Use of Analytical Method." Nondestructive Testing Technology 3, no. 1 (2022): 23-31.
- Majid Farhang marani, Mohammadreza Farahani, Mohammad Nazari, and Omid Sam Daliri. "Experimental correlation between microstructure, residual stresses and mechanical properties of friction stir welded 2024-T6 aluminum alloys." International Journal Of Advanced Design And Manufacturing Technology 15, no. 3 (2022): 1-9.
Presented Papers in International Conferences
- Setayesh Hakak-zargar, Mohammadreza Farahani, and Alireza Araee. "Investigation on the effect of SAW sequence on the distortion in butt welded plates." International Conference on Brazing, Soldering and Special Joininng technologies, Beijing.
- Emad Sadeqzadeh Naeini, Mohammadreza Farahani, and Pouyan Karami. "Experimental and Numerical Evaluation of composite-metal Adhesive Bonded Joints and Study on Effective Parameters." The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), Tehran.
- Davood Akbari, and Mohammadreza Farahani. "Investigation on the Influences of Welding Process Parameters on the Remained Stress Distribution." 2015 International Conference on Intelligent Materials and Manufacturing Engineering (IMME2015), Philipsburg.
- Moeen Enami, Mohammadreza Farahani, and Majid Sohrabian. "Evaluation of mechanical properties of Resistance Spot Welding and Friction Stir Spot Welding on Aluminium Alloys." International Conference on researches in Science and Engineering, İSTANBUL.
- Pouyan Ghabezi, and Mohammadreza Farahani. "Experimental Investigation of the Single Lap Joint Strength with Rectangular, Triangular and Circular 3D Defects." 2nd International Conference on Research in Science and Technology, İSTANBUL.
- Mohammadjavad Pakravan, Mohammadreza Farahani, and Mojtaba Rezaee Hajideh. "Effects of pass number on the contact angle of the coating of AZ31 magnesium alloy by Ni5Al powder." International Conference on Mechanical Engineering, Industries and Aerospace, Hamedan.
- Mohammadjavad Pakravan, Mohammadreza Farahani, and Mojtaba Rezaee Hajideh. "Coating of AZ31 magnesium alloy with Ni5Al powder by plasma spraying at different nuzzle distances and corrosion properties study using electrochemical impedance spectra and potentiodynamic polarization." International Conference on Mechanical Engineering, Industries and Aerospace, Hamedan.
- MILAD MOHAMMADIAN, Akbari Davood, Mohammadreza Farahani, and Pouya Faraji Kalajahi. "Application of water vapor excitation in the Non-Destructive Evaluation of gas turbine blades by active thermography." 6th Iranian Nondestructive Testing International Conference, Tehran.
Presented Papers in National Conferences
- Emad Sadeghzadeh, Mohammadreza Farahani, Mohamadali Ansari, and Mohsen Mazroee. "Comparison between the Adhesive Joint Strength with Quadratic Stress Criterion using Cohesive Zone Modeling Technique." ISME2015, Tehran.
- Majid Farhang, Mohammadreza Farahani, and Mohammad Nazari. "Nondestructive Evaluation of Residual Stresses in the Friction Stir Welding of AL 2024T6." 3rd Iranian International Nondestructive Testing Conference - IRNDT2016, Tehran.
- Majid Farhang, Mohammadreza Farahani, and Mohammad Nazari. "Nondestructive Study on the Effects of Friction Stir Welding Process Parameters on the Magnitudes of Welding Residual Stresses." 3rd Iranian International Nondestructive Testing Conference - IRNDT2016, Tehran.
- Saeed Moshayedi, and Mohammadreza Farahani. "Comparison between the Phased Array Ultrasonic Testing and Radiography in Detection of Dangerous Defects in Welds of Thick Sections." 3rd Iranian International Nondestructive Testing Conference - IRNDT2016, Tehran.
- Farhad Heydarpour, Mohammadreza Farahani, and Pouyan Ghabezi. "Experimental Investigation of the Single Lap Aluminium Joint Strength with Different 2D Defects." International Conference on Engineering and Applied Sciences, Dubai.
- Davod Pourabdollah, Mohammadreza Farahani, and Sohrab Narestan Talesh. "Study of the Dynamic Forces applied to the Fifth Wheel of Semitrailer in Different Working Conditions." 1St International Conference on New Research Achievements in Mechanics, Mechatronics & Biomechanics, Tehran.
- Sohrab Narestan Talesh, and Mohammadreza Farahani. "Investigation on the Effects of Suspension System parameters on the Dynamic Behavior of Semi-trailers in Crossing the Road Obstacles." 1St International Conference on New Research Achievements in Mechanics, Mechatronics & Biomechanics, Tehran.
- Mahdi Sajadipour, Mohammadreza Farahani, and Sohrab Narestan Talesh. "Investigation on the Effects of Tire Spring Rate on the Dynamic Behavior of Semi-trailers in Crossing the Road Obstacles." 1St International Conference on New Research Achievements in Mechanics, Mechatronics & Biomechanics, Tehran.
- Amir Safari, and Mohammadreza Farahani. "Experimental Study on the Effects of Sanding on the Adhesive Single Lap Joint Strength." Thirteenth Conference of Materials and Metallurgical Engineering of Iran, Tehran.
- Amir Safari, and Mohammadreza Farahani. "Study on the Effects of Sanding on the adhesive Joints from AA2024-T3 Alloy." Thirteenth Conference of Materials and Metallurgical Engineering of Iran, Tehran.
- Amir Safari, and Mohammadreza Farahani. "Experimental Study on the Influences of Surface Roughness on the Adhesive Joint Strength of Aluminium Alloys." Thirteenth Conference of Materials and Metallurgical Engineering of Iran, Tehran.
- Amir Safari, and Mohammadreza Farahani. "Experimental Study on the Effects of Adhesive Type and Shot Blast on the Adhesive Joint Strength." 2nd International Conference on New Research Achievements in Mechanics, Industrial and Aerospace Engineering, Tehran.
- Amir Safari, and Mohammadreza Farahani. "Experimental study on the effects of cohesive type and sandblast surface preparation on the strength of adhesive single lap joint." 2nd International Conference on New Research Achievements in Mechanics, Industrial and Aerospace Engineering, Tehran.
- Nima Kadivar, Mohammadreza Farahani, and Farhang Honarvar. "Defect Shape Detection in the Adhesive Joints Using Lamb Waves." 6th International Conference on Acoustics and Vibration, Tehran.
- Nima Kadivar, Mohammadreza Farahani, and Farhang Honarvar. "Defect Size Evaluation in the Adhesive Joint Using Lamb Waves." 6th International Conference on Acoustics and Vibration, Tehran.
- Ali Zohrehvand, and Mohammadreza Farahani. "Investigation of mechanical properties and metallurgical structure in the fabrication process of aluminum-steel double layer sheet." International conference on Applied Research in Electrical, Mechanical and Mechatronics Engineering, Tehran.
- Ali Zohrehvand, and Mohammadreza Farahani. "Cladding of St37 steel with Al 6061-T6 using friction stir welding technique." The 16th international conference of Iranian aerospace society, Tehran.
- Ali Shahmirzalo, Mohammadreza Farahani, and Davood Akbari. "Investigation on the effects of subsize and step size on the accuracy of elastic modulus measurement using digital image correlation method." The 16th international conference of Iranian Aerospace Society, Tehran.
- Navid Hassanzade, Mohammadreza Farahani, and Nima Kadivar. "Investigation on the impact failure in composite structures using ultrasonic testing." The 4th Iranian International NDT Conference, Tehran.
- Alireza Ahmadi, Mohammadreza Farahani, and Amirreza Ardebili. "Non-destructive evaluation of defects of low carbon steel plates using pulsed thermography method." 5th International Nondestructive Testing Conference, Tehran.
- Navid Vafa, and Mohammadreza Farahani. "A new generation of lockin thermography with optical or ultrasound stimulation." 5th Iranian International Nondestructive Testing Conference, Tehran.
- Alireza Ahmadi, Mohammadreza Farahani, and Amirreza Ardebili. "effect of material properties on defect detection for metallic plates using pulsed thermography." 5th International Nondestructive Testing Conference, Tehran.
- Navid Vafa, Mohammadreza Farahani, and Amirhossein Zamanpour. "Study on Vibration Stress Relief Techniques with Experimental study on Vibration Stress Relief of the Welded Joint." 4th National Congress of Mechanical Engineering and Chemical Engineering, Tehran.
- Navid Vafa, Mohammadreza Farahani, and Amirhossein Zamanpour. "Introduction to Residual Stress and Experimental study on Vibration Stress Relief." 5th International Conference on Apllied Resaerch in Electrical, Mechanical and Mechatronics Engineering, Tehran.
- Navid Vafa, and Mohammadreza Farahani. "Experimental Study on Vibration Stress Relief in a welded joint." 27th annual international conference of Iranian society of mechanical engineering, Tehran.
- Mohammadjavad Pakravan, and Mohammadreza Farahani. "Nondestructive testing of composite laminates using DIC." 27th annual international conference of Iranian society of mechanical engineering, Tehran.
- Reza Khoshkbari Rezaieh, and Mohammadreza Farahani. "Employment of Modulated thermography for nondestructive testing of the honeycomb sandwich panel core." 27th annual international conference of Iranian society of mechanical engineering, Tehran.
- Navid Vafa, and Mohammadreza Farahani. "Natural frequency calculation and modal analysis in the vibration stress relief method for reducing the welding residual stresses.." The 9th International Conferences on the Acoustics and Vibration, Tehran.
- Amirreza Ardebili, Mohammadreza Farahani, and Pouriya Meshkizadeh. "Investigation on the effect of fiber material on nondestructive evaluation of the composite patches using pulse thermography." 16th Annual and 5th International Conference on Manufacturing Engineering, Tehran.
- Amirreza Ardebili, Mohammadreza Farahani, and Mohammad Pourghasemi. "Investigating the effect of number of layers in infrared non-destructive testing of composite patches reinforced with glass fibers." 16th Annual and 5th International Conference on Manufacturing Engineering (ICME2018), Tehran.
- Pouriya Meshkizadeh, Mohammadreza Farahani, and Amirreza Ardebili. "Reconstructing and upgrading the active thermography images for identifying the defects in metal parts." 16th Annual and 5th International Conference on Manufacturing Engineering (ICME2018), Tehran.
- Mohammad Pourghasemi, and Mohammadreza Farahani. "Employment of non-destructive inspection method of short pulse thermography to inspect fiber-reinforced composite parts." 6th Iranian Nondestructive Testing International Conference, Tehran.
- Mohammad Pourghasemi, and Mohammadreza Farahani. "Improving images in nondestructive evaluation of fiber-reinforced composite parts using pulse thermography method." 6th Iranian Nondestructive Testing International Conference, Tehran.
- Morteza Zarnegar, Mohammadreza Farahani, Yaser Vahidshad, and Mohammadjavad Pakravan. "Investigation of the effect of hatch space parameter on mechanical properties of titanium alloy produced by SLM additive manufacturing method by DIC technique." 4th International Conference on Welding and Non Destructive Testing, Tehran.
- Vahid Shirazi, Meysam Khodabakhshi, Maesome Soheyli, Mohammadreza Farahani, and Akbari Davood. "Manufacturing a sampling device using the semi-destructive scoop method." The 30th Annual International Conference of the Iranian Association of Mechanical Engineers, Tehran.
- Majid Farhang marani, Mohammadreza Farahani, and Akbari Davood. "Application of ring core and hole drilling strain gauge measurement techniques for the residual stresses evaluation of the gas turbine components." Seventh National Conference on Gas Turbines, Tehran.
- Pouya Faraji Kalajahi, Akbari Davood, Mohammadreza Farahani, and MILAD MOHAMMADIAN. "A Comparison between Nondestructive testing of gas turbine blades by active IR Thermography using optical and water-vapor excitations." Seventh National Conference on Gas Turbines, Tehran.
Referees
- 24th Annual International Conference on Mechanical Engineering (ISME 2016), Yazd, 2015/04/21
- 5th International Conference on Acoustics and Vibration, Tehran, 2015/08/23
- 25th International Conference on Mechanical Engineering, Tehran, Iran, 2017/01/29
- th Iranian International NDT Conference, Tehran, Iran, 2017/02/19
- 4th International Conference on Manufacturing Engineering, Tarbiat Modares University, Tehran, 2018/08/23
- 5th Iranian International NDT Conference, Olympic Hotel, Tehran, Iran, 2018/09/23
- 4th International Conference on Manufacturing Engineering, Tarbiat Modares University, Tehran, 2018/10/24
- 5th Iranian International Nondestructive Testing Conference, Olympic Hotel, Tehran, Iran, 2019/01/03
- 16th Annual and 5th International Conference on Manufacturing Engineering (ICME2018), Tehran, 2019/12/01
Thesis (supervisor)
- -------------------, Fayaz Nosohi, University of Tehran, 2015/09/15
- -------------------, Nima Kadivar, University of Tehran, 2016/09/10
- -------------------, Seyed Amir Davoud Alavi, University of Tehran, 2016/10/04
- -------------------, Moeen Enami, University of Tehran, 2017/01/10
- -------------------, Farhad Heidarpoor, University of Tehran, 2017/01/25
- -------------------, Homa Aliakbarian, University of Tehran, 2017/01/31
- -------------------, Ali Zohrehvand, University of Tehran, 2017/09/19
-
چنانچه بخشی از اطلاعات فردی جنابعالی در CV انگلیسی نمایش داده نمیشود به دلیل نبودن معادل لاتین آن میباشد و جهت تکمیل آن میتوانید به کارگزینی مراجعه بفرمایید
-
چنانچه برخی از فعالیتهای شما در CV انگلیسی نمایش داده نمیشود، ممکن است به دلیل نبودن معادل لاتین آن
باشد و
جهت
تکمیل ان می توانید به لیست فعالیتهای مربوطه مراجعه و فیلدهای خالی را پر کنید