Education
- Post doc, ---, Manufacturing Engineering, University of Tehran
- P.H.D, 2012, Mechanical Engineering, University of Tehran
- M.S, 2007, Mechanical Engineering, University of Tehran
- B.S, 2004, Mechanical Engineering, Amirkabir University of Technology
Awards & Honors (in terms of: paper, project, etc...)
کتاب های غیر از تالیف و ترجمه
Papers in International Journals
- Milad Aali Majid Abad, Alireza Rezaei, and Ghader Faraji. "Simultaneous enhancement of strength and ductility in AM60 tubes using a novel approach of modified tube cyclic expansion extrusion." JOM 1, no. 1 (2024): .
- Seyed hamidreza Torabi, Seyyed Mohammad Hosseini, Armin Siahsarani, Ahmad Najafi, Abolfazl Masoumi, and Ghader Faraji. "Processing of different Mg-based multiphase alloys via a combined severe plastic deformation." MATERIALS SCIENCE AND TECHNOLOGY 1, no. 1 (2024): .
- Tohid khandani, Ghader Faraji, and Morad Karim Poor. "Specimen size effect on behavior of Mg-3Al-1Zn magnesium alloy in macro to micro-scale deformation." International Journal of Precision Engineering and Manufacturing 1, no. 1 (2023): .
- Mohammadreza Sadrkhah, Ghader Faraji, and VAHID ESMAEILI. "An in-vivo study on nanostructured Ti dental implant produced by caliber rolling and surface modification by SLActive." JOM 1, no. 1 (2023): .
- Mahdi Zohrevand, Ali Reza Rezaei, Mohammad Reza Sabour, Erfan Taherkhani, and Ghader Faraji. "Recent progress on SPD processes empowered by hydrostatic pressure." MATERIALS TRANSACTIONS 64, no. 8 (2023): .
- Milad Aali Majid Abad, Mohammad Eftekhari, and Ghader Faraji. "Characterization of Mg–9Al–1Zn-0.2Mn alloy tubes processed by a new modified tube cyclic expansion extrusion (M-TCEE) process." Journal of Materials Research and Technology-JMR&T 24, no. 24 (2023): .
- Mohammadreza Sadrkhah, Milad Aali Majid Abad, MOHSEN MESBAH, Alireza Sadeghi, and Ghader Faraji. "Microstructural, mechanical, texture and corrosion properties of severely deformed AZ31 Alloy with Sr addition." JOM 1, no. 1 (2023): .
- Majid Haghpanah, Amin Esmaeilnia, M.R. Sabour, E.. Taherkhani, Mahmoud Mousavi Mashhadi, and Ghader Faraji. "Hydrostatic twist extrusion (HTE) for processing relatively long ultrafine grained samples." MATERIALS LETTERS 333, no. 133 (2023): .
- Mohammadreza Sadrkhah, Ghader Faraji, Somayeh Khorasani, and Mohsen Mesbah. "Excellent mechanical properties, wettability and biological response of ultrafine-grained pure Ti dental implants surface modified by SLActive." JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 1, no. 1 (2023): .
- Seyed moien Faregh, Ghader Faraji, Mahmoud Mousavi Mashhadi, and M.. Eftekhari. "Texture evolution and mechanical anisotropy of an Ultrafine/Nano-grained pure copper tube processed via hydrostatic tube cyclic expansion extrusion (HTCEE)." International Journal of Minerals Metallurgy and Materials 29, no. 29 (2022): .
- Armin Siahsarani, Ghader Faraji, B.. Zare Damichi, and A.. Baigzadeh. "Microstructural and mechanical evaluation of the pure copper rods processed by severe plastic deformation method of hydrostatic cyclic extrusion compression." JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 77, no. 56 (2022): .
- Kambiz Zandishahidi, and Ghader Faraji. "Fabrication of W-Cu composite by wire crumpling and subsequent melt infiltration." MATERIALS LETTERS 321, no. 132 (2022): .
- Moh. Afrasiab, Yousef Hojjat, Ghader Faraji, and Hassan Moslemi Naeini. "Formability Enhancement of Ultra-Fine Grained Pure Copper Sheets Produced by Accumulative Roll Bonding Aided by Electromagnetic Forming." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 22, no. 34 (2022): .
- Saeed Mahmody, and Ghader Faraji. "Fabrication of functionally graded W-Cu composite via variable speed induction sintering and subsequent infiltration." International Journal of Refractory Metals and Hard Materials 1, no. 1 (2022): .
- Kaveh Edalati, Andrea Bachmaier, Victor A. Beloshenko, Yan Beygelzimer, Vladimir D. Blank, Walter J. Botta, Jakub Cizek, Nariman A. Enikeev, Yuri Estrin, Ghader Faraji, Roberto B. Figueiredo, and Masayoshi Fuji. "Nanomaterials by Severe Plastic Deformation: Review of Historical Developments and Recent Advances." Materials research letters 10, no. 10 (2022): .
- Seyed Mohammad Hosseini, m.. Roostaei, Mahmoud Mousavi Mashhadi, Hamed Jabbari, and Ghader Faraji. "Fabrication of Al/Mg bimetallic thin-walled ultrafine-grained tube by severe plastic deformation." JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 2, no. 2 (2021): .
- Armin Siahsarani, Farshad Samadpour, Mohammad Hossein Mortazavi, and Ghader Faraji. "Microstructural, mechanical and corrosion properties of AZ91 magnesium alloy processed by a severe plastic deformation method of hydrostatic cyclic expansion extrusion." METALS AND MATERIALS INTERNATIONAL 1, no. 1 (2021): .
- M.. Eftekhari, Ghader Faraji, Mohsen Bahrami, and Majid Baniassadi. "Hydrostatic tube cyclic extrusion compression (HTCEC) as a novel severe plastic deformation method for fabricating long nanostructured tubes." METALS AND MATERIALS INTERNATIONAL 31, no. 3 (2021): .
- M.. Eftekhari, Ghader Faraji, and Mohsen Bahrami. "Processing of commercially pure copper tubes by hydrostatic tube cyclic extrusion compression (HTCEC) as a new SPD method." ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING 21, no. 21 (2021): .
- Armin Siahsarani, and Ghader Faraji. "Processing and characterization of AZ91 magnesium alloys via a novel severe plastic deformation method; hydrostatic cyclic extrusion compression (HCEC)." TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA 5, no. 31 (2021): .
- Siroos AHMADI, Vali ALIMIRZALOO, Ghader Faraji, and Ali DONIAVI. "Properties inhomogeneity of AM60 magnesium alloy processed by cyclic extrusion compression angular pressing followed by extrusion." TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA 31, no. 3 (2021): .
- Siroos Ahmadi, Vali Alimirzaloo, Ghader Faraji, and Ali Donyavi. "A new modified cyclic extrusion channel angular pressing (CECAP) process for producing ultrafine-grained Mg Alloy." TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 73, no. 24 (2020): .
- Ali Shahmirzaloo, S.M Hosseini, Armin Siahsarani, Davood Rahmatabadi, Ramin Hashemi, and Ghader Faraji. "Influences of the constrained groove pressing on microstructural, mechanical, and fracture properties of brass sheets." Materials Research Express 7, no. 11 (2020): .
- Milad Masrouri, Ghader Faraji, Sepehr Pedram, and Mohammadreza Sadrkhah. "In-vivo study of ultrafine grained CP-Ti dental implants surface modified by SLActive with excellent wettability." INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES 102, no. 68 (2020): .
- Farshad Samadpour, Ghader Faraji, and Mohammad Motallebi Savarabadi. "Processing of long ultrafine-grained AM60 magnesium alloy tube by hydrostatic tube cyclic expansion extrusion (HTCEE) under high fluid pressure." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 111, no. 4444 (2020): .
- Armin Siahsarani, and Ghader Faraji. "Hydrostatic cyclic extrusion compression (HCEC) process; a new CEC counterpart for processing long ultrafine-grained metals." ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING 10, no. 24 (2020): .
- Siroos Ahmadi, Ghader Faraji, Vali Alimirzaloo, and Ali Donyavi. "Microstructure and Mechanical Properties of AM60 Magnesium Alloy Processed by a New Severe Plastic Deformation Technique." METALS AND MATERIALS INTERNATIONAL 20, no. 1 (2020): .
- Tohid khandani, Ghader Faraji, and Hr. Torabi. "Processing and properties of ultrafine-grained Mg-3AL-1Zn magnesium alloy microtubes fabricated via isothermal hot microforming of SPD processed precursors." INTERNATIONAL JOURNAL OF MATERIALS RESEARCH 111, no. 2 (2020): .
- Farshad Samadpour, Ghader Faraji, and Armin Siahsarani. "Processing of AM60 magnesium alloy by hydrostatic cyclic expansion extrusion at elevated temperature as a new severe plastic deformation method." International Journal of Minerals Metallurgy and Materials 6, no. 6 (2019): .
- Farshid Reshadi, Ghader Faraji, Moghtaderi Hassan, and Shahaboddin Faghihi. "Surface and bulk modification of titanium grade 2 substrates for enhanced biological activity." JOM 72, no. 2 (2019): .
- Mohammad Motallebi Savarabadi, Ghader Faraji, and Mohammad Eftekhari. "Microstructure and mechanical properties of the commercially pure copper tube after processing by hydrostatic tube cyclic expansion extrusion (HTCEE)." METALS AND MATERIALS INTERNATIONAL 7, no. 7 (2019): .
- S.. Amani, and Ghader Faraji. "Processing and properties of biodegradable magnesium microtubes for using as vascular stents: A Brief Review." METALS AND MATERIALS INTERNATIONAL 1, no. 12 (2019): 1345.
- Ghader Faraji, and Hessam Torabzadeh Kashi. "An Overview on the Continuous Severe Plastic Deformation Methods." MATERIALS TRANSACTIONS 60, no. 7 (2019): 3.
- Ali Torkian, Ghader Faraji, and Morad Karim Poor. "Mechanical properties and microstructure of WE43 Mg alloy processed by warm ECAP followed by extrusion." ARCHIVES OF METALLURGY AND MATERIALS 63, no. 2 (2019): 1093.
- D.. Rahmat Abadi, Mohmmad Tayebi, Ramin Hashemi, and Ghader Faraji. "Evaluation of microstructure and mechanical properties of Al5052/Cu multi-layered composite fabricated by the ARB process." POWDER METALLURGY AND METAL CERAMICS 57, no. 3 (2019): 144.
- Mohammad Motallebi Savarabadi, Ghader Faraji, and Erfan Zalenzhad. "Hydrostatic tube cyclic expansion extrusion (HTCEE) as a new severe plastic deformation method for producing long nanostructured tubes." JOURNAL OF ALLOYS AND COMPOUNDS 785, no. 785 (2019): 136.
- M. Hoghooghi, Omid Jafari, S.. Amani, Ghader Faraji, and Karen Abrinia. "Microstructure and hardness evaluation of magnesium samples processed by a new design of spread extrusion method." Iranian Journal of Materials Science and Engineering 16, no. 4 (2019): .
- Parham Rostami, Ghader Faraji, Alireza Sadeghi, and Mostafa Baghani. "Microstructure and Mechanical Properties of CP-Titanium Processed by ECAP Followed by Warm Caliber Rolling." TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 11, no. 11 (2018): 1.
- Ali Fata, M.. Eftekhari, Ghader Faraji, and Mahmoud Mousavi Mashhadi. "Enhanced hot tensile ductility of Mg-3Al-1Zn alloy thin-walled tubes processed via a combined severe plastic deformation." JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 40, no. 40 (2018): 412.
- D.. Rahmat Abadi, Mohmmad Tayebi, Ramin Hashemi, and Ghader Faraji. "Microstructure and mechanical properties of Al/Cu/Mg laminated composite sheets produced by ARB process." International Journal of Minerals Metallurgy and Materials 265, no. 5 (2018): 265.
- S.. Amani, Ghader Faraji, Hossein Kazemi, and Mostafa Baghani. "Manufacturing and mechanical characterization of Mg-4Y-2Nd-0.4Zr-0.25La magnesium microtubes by combined severe plastic deformation process for biodegradable vascular stents." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 40, no. 742 (2018): 442.
- Farshad Samadpour, Ghader Faraji, Pejman Babaei hamedani, and Mahdi Mohammadpour. "Hydrostatic cyclic expansion extrusion (HCEE) as a novel severe plastic deformation process for producing long nanostructured metals." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 718, no. 718 (2018): 412.
- Alireza Mahmoudian, Nsyahira Mannuar, Ghader Faraji, Nadia Dayana Bahar, and Mahdi Sparham. "Severe Plastic Deformation of Commercial Pure Titanium (CP-Ti) for biomedical application A brief Review." JOM 77, no. 65 (2018): 3012.
- Ali Fata, M.. Eftekhari, Ghader Faraji, and Mahmoud Mousavi Mashhadi. "Hot tensile deformation behavior of Mg-Zn-Al magnesium alloy tubes processed by severe plastic deformation." JOURNAL OF ALLOYS AND COMPOUNDS 742, no. 742 (2018): 442.
- Hooman Abdolvand, Ghader Faraji, and Majid Baniassadi. "Microstructure and mechanical properties of fine-grained thin-walled AZ91 tubes processed by a novel combined SPD process." BULLETIN OF MATERIALS SCIENCE 40, no. 40 (2018): 1471.
- S.. Amani, and Ghader Faraji. "Recrystallization and mechanical properties of WE43 magnesium alloy processed via cyclic expansion extrusion." International Journal of Minerals Metallurgy and Materials 25, no. 6 (2018): 672.
- [] [], Ghader Faraji, Sh. Nikbakht, Mouhammad Reza Sharifzade, Mahdi Mohammadpour, , and Maryam Rashedi. "Processing and characterization of nanostructured Grade 2 Ti processed by combination of warm isothermal ECAP and extrusion." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 703, no. 703 (2017): 551.
- S.. Amani, Ghader Faraji, Hossein Kazemi, Karen Abrinia, and Hamid Ghanbari. "A combined method for producing high strength and ductility magnesium microtubes for biodegradable vascular stents application." JOURNAL OF ALLOYS AND COMPOUNDS 723, no. 723 (2017): 467.
- Mohammad Mahdi Samandari, Karen Abrinia, A.. Akbarzadeh, Saeed Balalai, and Ghader Faraji. "Properties and mechanism of Al/St bimetal tube bonding produced by cold spin-bonding (CSB) process." TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 2017, no. 3 (2017): 1.
- S.. Amani, Ghader Faraji, and Karen Abrinia. "Microstructure and hardness inhomogeneity of fine-grained AM60 magnesium alloy subjected to cyclic expansion extrusion (CEE)." Journal of Manufacturing Processes 28, no. 28 (2017): 197.
- Farshid Reshadi, Ghader Faraji, Majid Baniassadi, and Mohsen Tajedini. "Surface modification of severe plastically deformed ultrafine grained pure titanium by plasma electrolytic oxidation." SURFACE & COATINGS TECHNOLOGY 316, no. 316 (2017): 113.
- M.. Ensafi, Ghader Faraji, and Hooman Abdolvand. "Cyclic extrusion compression angular pressing (CECAP) as a novel severe plastic deformation method for producing bulk ultrafine grained metals." MATERIALS LETTERS 197, no. 1 (2017): 12.
- Ramin Meshkabadi, Ghader Faraji, , Ali Fata, and V.. Pooyafar. "Microstructure and homogeneity of semi-solid 7075 aluminum tubes processed by parallel tubular channel angular pressing (PTCAP)." METALS AND MATERIALS INTERNATIONAL 23, no. 5 (2017): 1019.
- Ali Fata, Ghader Faraji, Mahmoud Mousavi Mashhadi, and Vah. Tavakkoli. "Hot deformation behavior of Mg-Zn-Al alloy tube processed by severe plastic deformation." ARCHIVES OF METALLURGY AND MATERIALS 62, no. 1 (2017): 162.
- Ramin Meshkabadi, V.. Pooyafar, Akbar Javdani, and Ghader Faraji. "An Enhanced Steady-state Constitutive Model for Semi-solid Forming of Al7075 Based on Cross Model." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 48, no. 48 (2017): 4275.
- Moh. Afrasiab, Ghader Faraji, Vah. Tavakkoli, and Mahmoud Mousavi Mashhadi. "Effect of the mechanical anisotropy on the energy absorption capacity in thin-walled tubes." Materials Testing 59, no. 3 (2016): 3.
- M.. Eskandarzadeh, Abolfazl Masoumi, and Ghader Faraji. "AN INVESTIGATION INTO SLIPPAGE PROBLEM IN INCREMENTAL HIGH PRESSURE TORSION PROCESS." Journal of the Balkan Tribological Association , no. (2016): .
- M.. Eskandarzadeh, Abolfazl Masoumi, Ghader Faraji, Mahdi Mohammadpour, and Xinjie Sabrina Yan. "A new designed incremental high pressure torsion process for producing long nanostructured rod samples." JOURNAL OF ALLOYS AND COMPOUNDS 695, no. 695 (2016): 1537.
- Mostafa Ahmad Khanbeigi, Omid Shapoorgan, and Ghader Faraji. "Microstructure and mechanical properties of Al tube processed by friction stir tube back extrusion (FSTBE)." TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 26, no. 26 (2016): 1537.
- Ramin Meshkabadi, Ghader Faraji, Akbar Javdani, and V.. Pooyafar. "Investigation on the combined effects of the ECAP and subsequent heating parameters on the semi-solid microstructure of Al 7075." TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA 26, no. 26 (2016): 3091.
- Ghader Faraji, and H.s. Kim. "Review of principles and methods of severe plastic deformation for producing ultrafine-grained tubes." MATERIALS SCIENCE AND TECHNOLOGY 3, no. 39 (2016): 50.
- Omid Shapoorgan, and Ghader Faraji. "Rubber pad tube straining as a new severe plastic deformation method for thin-walled cylindrical tubes." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 27, no. 12 (2016): 1.
- Ali Fata, Ghader Faraji, Mahmoud Mousavi Mashhadi, and Vah. Tavakkoli. "Hot tensile deformation and fracture behavior of ultrafine-grained AZ31 magnesium alloy processed by severe plastic deformation." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 674, no. 674 (2016): 9.
- Mohsen Mesbah, Firouz Fadaeifard, , Ghader Faraji, and Bushrao Bushrao. "Nano-Mechanical Properties and Microstructure of UFG Brass Tubes Processed by Parallel Tubular Channel Angular Pressing." METALS AND MATERIALS INTERNATIONAL 22, no. 6 (2016): 1097.
- Ali Fata, Ghader Faraji, Mahmoud Mousavi Mashhadi, and H.. Abdolvand. "Evaluation of hot tensile behavior of fine-grained Mg-9Al-1Zn alloy tube processed by severe plastic deformation." TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 9, no. 99 (2016): 1.
- S.s. Jamali, Ghader Faraji, and Karen Abrinia. "Evaluation of mechanical and metallurgical properties of AZ91 seamless tubes produced by radial-forward extrusion method." Materials Science and Engineering: A 3, no. 7 (2016): 507.
- Mehdi Saeidi, Mohammad Kazem Besharati Givi, and Ghader Faraji. "Microstructural and mechanical properties of dissimilar aluminum alloys/Al2O3 nano-composite joint via FSW." INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES 23, no. 23 (2016): 152.
- S.s. Jamali, Ghader Faraji, and Karen Abrinia. "Hydrostatic radial forward tube extrusion as a new plastic deformation method for producing seamless tubes." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 3, no. 7 (2016): 1.
- Erfan Zalenzhad, and Ghader Faraji. "Fretting fatigue life investigation of AL7075-T6 alloy coated by multi-layer thin solid films of TiCr/TiN/CrN and Ti/Cr/TiN/Cr/CrN/TiCrN." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY 140, no. 12 (2016): 7.
- Mohsen Khodsetan, Ghader Faraji, and Karen Abrinia. "A Numerical and Experimental Study of Constrained Ironing Process as a Novel High Thickness Reduction Ironing Method." TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 3, no. 1 (2016): 1.
- P.. Mashhadi, M.. Zadshakoorian, and Ghader Faraji. "Friction study in Equal Channel Multi Angular Pressing; Load Curve and Ring Compression tests." TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 1, no. 1 (2015): 406.
- Mohsen Mesbah, Ghader Faraji, and Bushrao Bushrao. "EBSD and Nanoindentation analyzes of nanostructured Al tubes processed by multipass tubular-channel angular pressing." METALS AND MATERIALS INTERNATIONAL 22, no. 2 (2015): 288.
- H.. Abdolvand, Ghader Faraji, Mohammad Kazem Besharati Givi, and Mohammad Riazati. "Evaluation of the microstructure and mechanical properties of the Ultrafine grained thin-walled tubes processed by severe plastic deformation." METALS AND MATERIALS INTERNATIONAL 21, no. 16 (2015): 1068.
- Mohsen Khodsetan, Ghader Faraji, and Karen Abrinia. "A novel ironing process with extra high thickness reduction: Constrained Ironing." MATERIALS AND MANUFACTURING PROCESSES 30, no. 11 (2015): 1324.
- Hesam Torabzadeh, and Ghader Faraji. "Cyclic flaring and sinking (CFS) as a new severe plastic deformation method for thin-walled cylindrical tubes." TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 2, no. 1 (2015): 1.
- Ah. Shirazi, Karen Abrinia, and Ghader Faraji. "Analytical and experimental investigations on the novel hydro ironing process." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 1, no. 15 (2015): 15.
- Farshid Reshadi, Ghader Faraji, Shah Aghdamifar, P.. Yavari, and Mahmoud Mousavi Mashhadi. "Deformation speed and temperature effects on AZ91 during Tubular Channel Angular Pressing." MATERIALS SCIENCE AND TECHNOLOGY 5, no. 15 (2015): 1.
- D.. Jafarlou, Er. Zalnejhad, Ghader Faraji, A.s. Hamouda, Noor Azizi, and Mohsen Hassan Mohamed. "Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 1, no. 1 (2015): 1.
- Moh. Afrasiab, Ghader Faraji, Vah. Tavakkoli, Mahmoud Mousavi Mashhadi, and Kamran Dehghani. "The effects of the multi-pass parallel tubular channel angular pressing on the microstructure and mechanical properties of the Cu-Zn tubes." TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS 1, no. 1 (2015): 1.
- Hamid Torabi, , Poioi Sadeghi, and Ghader Faraji. "Design and optimization of turbine blade preform forging using RSM and NSGA II." JOURNAL OF INTELLIGENT MANUFACTURING 1, no. 1 (2015): 11.
- Babak Manafi, V.. Shatermashhadi, Karen Abrinia, Ghader Faraji, and Maryam Sanei. "Development of a novel bulk plastic deformation method: hydrostatic backward extrusion." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 1, no. 11 (2015): 13.
- Ghader Faraji, S.. Roostaei, Amin Seyednosrati, and H.s. Kim. "Microstructure and Mechanical Properties of Ultra-fine-Grained Al-Mg-Si Tubes Produced by Parallel Tubular Channel Angular Pressing Process." METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 46, no. 4 (2015): 1805-1813.
- Mehdi Saeidi, Babak Manafi, Mohammad Kazem Besharati Givi, and Ghader Faraji. "Mathematical modeling and optimization of friction stir welding process parameters in AA5083 and AA7075 aluminum alloys joint." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 1, no. 1 (2015): 11.
- H.. Abdolvand, H.. Sohrabi, Ghader Faraji, and . "A novel combined severe plastic deformation method for producing thin-walled ultrafine grained cylindrical tubes." MATERIALS LETTERS 1, no. 1 (2014): 1.
- Vah. Tavakkoli, Moh. Afrasiab, Ghader Faraji, and Mahmoud Mousavi Mashhadi. "Severe mechanical anisotropy of High-strength ultrafine grained Cu-Zn tubes processed by parallel tubular channel angular pressing (PTCAP)." Materials Science and Engineering: A 625, no. 625 (2014): 50.
- Moh. Afrasiab, H.. Afrasiab, , and Ghader Faraji. "Design of the die profile for the incremental radial forging process." IRANIAN JOURNAL OF SCIENCE 39, no. 39 (2014): 89.
- Ah. Shirazi, Karen Abrinia, and Ghader Faraji. "Hydroironing: A Novel Ironing Method with a Higher Thickness Reduction." MATERIALS AND MANUFACTURING PROCESSES 30, no. 1 (2014): 99-103.
- H.. Sanati, Farshid Reshadi, Naser Soltani, Ghader Faraji, Amini Amini, and Kavan Hazeli. "The stress intensity factors (SIFs) of cracked half-plane specimen in contact with semi-circular object." THEORETICAL AND APPLIED FRACTURE MECHANICS 1, no. 1 (2014): 1.
- H.. Alihosseini, , Kamran Dehghani, and Ghader Faraji. "Producing High strength aluminum alloy by combination of equal channel angular pressing and bake hardening." MATERIALS LETTERS 140, no. 140 (2014): 196.
- Hadi Hosseini, Karen Abrinia, and Ghader Faraji. "Applicability of a modified backward extrusion process on commercially pure aluminium." MATERIALS & DESIGN 65, no. 65 (2014): 521.
- Er. Zalnejhad, , Ghader Faraji, and Ss. Shamshirband. "TiO2 nanotube coating on stainless steel 304 for biomedical applications." CERAMICS INTERNATIONAL 41, no. 41 (2014): 2785.
- , Karen Abrinia, and Ghader Faraji. "A methodology for determination of extended strain-based forming limit curve considering the effects of strain path and normal stress." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE 1, no. 1 (2014): 11.
- , Ghader Faraji, and Karen Abrinia. "Application of an Extended Strain-Based Forming Limit Curve in Finite Element Simulation of X-Branch Hydroforming." International Journal of Basic Sciences & Applied Research 3, no. 7 (2014): 406.
- H.. Sanati, Farshid Reshadi, Ghader Faraji, and Naser Soltani. "Evaluation of residual stress in ultrafine-grained aluminum tubes using shearography." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 10, no. 10 (2014): 10.
- V.. Shatermashhadi, Babak Manafi, Karen Abrinia, Ghader Faraji, and . "Development of a novel method for the backward extrusion." MATERIALS & DESIGN 62, no. 62 (2014): 361.
- Ghader Faraji, , and Bushrao Bushrao. "Ultrasonic assisted tubular channel angular pressing process." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 599, no. 599 (2014): 10-15.
- Ghader Faraji, Shah Aghdamifar, Poria Yavari, and Mahmoud Mousavi Mashhadi. "Mechanical and Microstructural Properties of Ultra-fine Grained AZ91 Magnesium Alloy Tubes Processed via Multi Pass Tubular Channel Angular Pressing (TCAP)." JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 30, no. 2 (2014): 134-138.
- Ghader Faraji, Poria Yavari, Shah Aghdamifar, and Mahmoud Mousavi Mashhadi. "Mechanical and Microstructural Properties of Ultra-fine Grained AZ91 Magnesium Alloy Tubes Processed via Multi Pass Tubular Channel Angular Pressing (TCAP).." JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 30, no. 2 (2014): 134-138.
- Mohsen Mesbah, Ghader Faraji, and Bushrao Bushrao. "Characterization of nanostructured pure aluminum tubes produced by tubular channel angular pressing (TCAP)." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 590, no. 590 (2014): 289-294.
- Iman Heidari, Mahmoud Mousavi Mashhadi, and Ghader Faraji. "A novel approach for preparation of aligned electrospun polyacrylonitrile nanofibers." CHEMICAL PHYSICS LETTERS 590, no. 590 (2013): 231-234.
- Seyed Mohammad Tabatabaei, Ghader Faraji, Mahmoud Mousavi Mashhadi, and . "Preform Shape Design in Tube Hydroforming Process Using Equi-Potential Line Method." MATERIALS AND MANUFACTURING PROCESSES 28, no. 3 (2013): 260-264.
- Ghader Faraji, Mahmoud Mousavi Mashhadi, , and . "TEM analysis and determination of dislocation densities in nanostructured copper tube produced via parallel tubular channel angular pressing process." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 563, no. 563 (2013): 193-198.
- , , Ghader Faraji, and Mohammad Kazem Besharati Givi. "Mechanical properties and microstructural evolution during multi-pass ECAR of Al 1100–O alloy." MATERIALS & DESIGN 42, no. 42 (2012): 388-394.
- Behzad Babaei Behzad Babaei, Ghader Faraji, Ali Mousavi, and . "Repetitive forging (RF) using inclined punches as a new bulk severe plastic deformation method." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 558, no. 558 (2012): 150-157.
- Ghader Faraji, Mahmoud Mousavi Mashhadi, and . "A numerical and experimental study on tubular channel angular pressing (TCAP) process." Journal of Mechanical Science and Technology 26, no. 11 (2012): 3463-3468.
- Ghader Faraji, Karen Abrinia, and Mahmoud Mousavi Mashhadi. "An upper-bound analysis for frictionless TCAP process.." ARCHIVE OF APPLIED MECHANICS 44, no. 33 (2012): 22.
- Ghader Faraji, and Mahmoud Mousavi Mashhadi. "TEM analysis and determination of dislocation densities in nanostructured copper tube. produced via parallel tubular channel angular pressing process." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 44, no. 44 (2012): 44.
- Meghdad Jafarzade, Ghader Faraji, and Ahmad Feyz Dizji. "Analysis of lateral extrusion of gear-like form parts." Journal of Mechanical Science and Technology 10, no. 26 (2012): 3243-3252.
- Ghader Faraji, and Mahmoud Mousavi Mashhadi. "Deformation. Behavior in Tubular Channel Angular Pressing (TCAP) Using Triangular and Semicircular Channels." MATERIALS TRANSACTIONS 33, no. 33 (2012): 8.
- Ghader Faraji, Karen Abrinia, Mahmoud Mousavi Mashhadi, and Mohsen Hamedi. "An upper-bound analysis for frictionless TCAP process." ARCHIVE OF APPLIED MECHANICS 83, no. 83 (2012): 483.
- Ghader Faraji, Mahmoud Mousavi Mashhadi, , and . "The role of friction in tubular channel angular pressing." REVIEWS ON ADVANCED MATERIALS SCIENCE 31, no. 31 (2012): 12.
- Mahdi Hosseini, Ghader Faraji, and Kamran Pourdehghani ghaziyani. "Producing Ultrafine Grain Al6061 Alloy by Accumulative Back Extrusion Process." JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 21, no. 7 (2012): 1220-1225.
- Alireza Hosseini, Ghader Faraji, Mahdi Izadi, and Hossein Dehghan. "Characterization of ultra-fine grained aluminum produced by accumulative back extrusion (ABE)." MATERIALS CHARACTERIZATION 68, no. 68 (2012): 14-21.
- Ghader Faraji, and Mahmoud Mousavi Mashhadi. "Deformation behavior in the tubular channel angular pressing (TCAP) as a noble SPD method for cylindrical tubes." APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING 107, no. 4 (2012): 819-827.
- Ghader Faraji. "Parallel tubular channel angular pressing (PTCAP) as a new severe plastic deformation method for cylindrical tubes." MATERIALS LETTERS 77, no. 77 (2012): 82-85.
- Ghader Faraji, and . "Accumulative Torsion Back (ATB) Processing as a New Plastic Deformation Technique." MATERIALS AND MANUFACTURING PROCESSES 27, no. 5 (2012): 507-511.
- Ghader Faraji. "Numerical and experimental investigation of the deformation behavior during the accumulative back extrusion of an AZ91 magnesium alloy." MATERIALS & DESIGN 35, no. 35 (2012): 251-258.
- Ghader Faraji. "Microstructural Evolution of UFG Magnesium Alloy Produced by Accumulative Back Extrusion (ABE)." MATERIALS AND MANUFACTURING PROCESSES 27, no. 3 (2012): 267-272.
- Ghader Faraji. "Deformation Behavior in Tubular Channel Angular Pressing (TCAP) Using Triangular and Semicircular Channels." MATERIALS TRANSACTIONS 53, no. 1 (2012): 8-12.
- Ghader Faraji, and Mahmoud Mousavi Mashhadi. "Tubular channel angular pressing (TCAP) as a novel severe plastic deformation method for cylindrical tubes." MATERIALS LETTERS 65, no. 19-20 (2011): 3009-3012.
- Ghader Faraji, and Mahmoud Mousavi Mashhadi. "Tubular channel angular pressing (TCAP) as a novel severe plastic deformation. method for cylindrical tubes." MATERIALS LETTERS 65, no. 65 (2011): 3012.
- Ghader Faraji, Mahmoud Mousavi Mashhadi, and Karen Abrinia. "Parallel tubular channel angular pressing (PTCAP): as a new severe plastic deformation method for cylindrical tubes." MATERIALS LETTERS 77, no. 77 (2011): 82–85.
- Ghader Faraji, Mahmoud Mousavi Mashhadi, and . "Microstructure inhomogeneity in ultra-fine grained bulk AZ91 produced by accumulative back extrusion (ABE)." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 528, no. 13-14 (2011): 4312-4317.
- Ghader Faraji. "Characterization of AZ91/alumina nanocomposite produced by FSP." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 528, no. 6 (2011): 2431-2440.
- Ghader Faraji. "Evaluation of effective parameters in metal bellows forming process." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 209, no. 7 (2009): 3431-3437.
Papers in National Journals
- Milad Aali Majid Abad, Alireza Rezaei, Mohammad Reza Sabour, and Ghader Faraji. "Mechanical properties and pitting corrosion behavior of Al5085 alloy processed via ECAP." Journal of Ultrafine Grained and Nanostructured Materials 56, no. 56 (2023): .
- M.. Rasa, Geonik Azadkoli, M.. Eftekhari, ali Fata, and Ghader Faraji. "Effects of equal channel angular pressing (ECAP) process with an additional expansion-extrusion stage on microstructure and mechanical properties of Mg–9Al–1Zn." Journal of Advanced Materials and Processing 9, no. 4 (2021): .
- Mahsa Shabani, and Ghader Faraji. "Processing and Characterization of Natural Hydroxyapatite Powder from Bovine Bone." Journal of Ultrafine Grained and Nanostructured Materials 53, no. 2 (2020): .
- Milad Aali, Ghader Faraji, Mohammadreza Sadrkhah, Ali Fata, and Mohamadjafar Hadad. "Evaluation of microstructure and tensile behavior of fine-grained AZ61 alloy tube processed by severe plastic deformation." Journal of Advanced Materials and Processing 1, no. 1 (2019): .
- M.. Eskandarzadeh, Ghader Faraji, Abolfazl Masoumi, and Ali Kalaki. "Optimal design of steppers in single step high pressure torsion (SIHPT) process as a novel SPD method." International Journal Of Advanced Design And Manufacturing Technology 1, no. 2 (2019): 3.
- Farshad Samadpour, Armin Siahsarani, Ghader Faraji, and M.. Bahrami. "Experimental and Finite Element Analyses of the Hydrostatic Cyclic Expansion Extrusion (HCEE) Process with Back-Pressure." Journal of Ultrafine Grained and Nanostructured Materials 52, no. 1 (2018): 3.
- Mohammad Mahdi Samandari, Hr. Torabi, and Ghader Faraji. "Upper bound and numerical analysis of cyclic expansion extrusion (CEE) process." Journal of Advanced Materials and Processing 5, no. 2 (2017): 75.
- Hooman Abdolvand, Ghader Faraji, and . "Microstructure and mechanical properties of AZ91 tubes fabricated by Multi-pass Parallel Tubular Channel Angular Pressing." Journal of Ultrafine Grained and Nanostructured Materials 50, no. 1 (2017): 16.
- Mohsen Khodsetan, Ghader Faraji, Vah. Tavakkoli, and Karen Abrinia. "Microstructure and Mechanical Properties of AZ91 Magnesium Cup Processed by a Combined Backward Extrusion and Constrained Ironing Method." International Journal Of Advanced Design And Manufacturing Technology 10, no. 1 (2016): 23.
- Vah. Tavakkoli, Ghader Faraji, Moh. Afrasiab, and Mahmoud Mousavi Mashhadi. "Severe plastic deformation of nanostructured Cu-30%Zn tubes at increased temperatures." International Journal Of Advanced Design And Manufacturing Technology 9, no. 3 (2016): 95.
- M.r. Baghaei, and Ghader Faraji. "Punch plastic deformation pipe cladding (PPDPC) as a novel tube cladding method." Journal of Advanced Materials and Processing 4, no. 2 (2016): 21.
- P.. Keshtiban, M.. Zadshakoorian, and Ghader Faraji. "Optimization of ECMAP Parameters in the Production of Ultra-fine Grained Al1050 Strips Using Grey Relational Analysis." Journal of Advanced Materials and Processing 3, no. 4 (2015): 45.
- P.. Keshtiban, M.. Zadshakoorian, and Ghader Faraji. "Modeling and production of high strength Al strips by equal channel multi angular pressing method." Journal of Advanced Materials and Processing 3, no. 4 (2015): 3.
- Ali Ansari, Emad Sadeqzadeh Naeini, Mohammad Kazem Besharati Givi, and Ghader Faraji. "Theoretical and Experimental Investigation of the Effective Parameters on the Microstructure of Magnesium Wire Produced by Friction Stir Extrusion." Mechanical Engineering modares 99, no. 9 (2015): 1.
- Mohammad Riazati, and Ghader Faraji. "Size effect in equal channel angular pressing (ECAP) process." Journal of Advanced Materials and Processing 3, no. 3 (2015): 3.
- Hamid Torabi, Mohammad Mahdi Samandari, Ghader Faraji, and Abolfazl Masoumi. "Numerical investigation of strain distribution during cyclic expansion extrusion (CEE)." Journal of Advanced Materials and Processing 3, no. 3 (2015): 35.
- Amin Seyednosrati, Karen Abrinia, and Ghader Faraji. "Development of a novel forward extrusion process for producing large-diameter tubes from small billets." Mechanical Engineering modares 14, no. 14 (2015): 143.
- A.r. Soofi, Mahmoud Mousavi Mashhadi, and Ghader Faraji. "The effect of pass numbers over microstructure and mechanical properties of magnesium alloy of AZ31C in the tubular channel angular pressing (TCAP) at temperature of 300°C." Mechanical Engineering modares 15, no. 1 (2014): 130.
- Hadi Hosseini, Karen Abrinia, and Ghader Faraji. "Upper bound analysis of a new back extrusion process." Mechanical Engineering modares 14, no. 15 (2014): 369.
- Ghader Faraji, Farshid Reshadi, and Majid Baniassadi. "A new approach for achieving excellent strain homogeneity in tubular channel angular pressing (TCAP) process." Journal of Advanced Materials and Processing 2, no. 1 (2014): 3.
- Ghader Faraji, and Mahmoud Mousavi Mashhadi. "Plastic Deformation Analysis in Parallel Tubular Channel Angular Pressing (PTCAP)." Journal of Advanced Materials and Processing 2, no. 2 (2013): 23-32.
Presented Papers in International Conferences
- Mohammadreza Sadrkhah, and Ghader Faraji. "Evaluation of tensile behaviour of finegrained AZ61 alloy tube processed by SPD." 3rd Int. Conf. on Mech and Aerospace Eng., Tehran.
- Mohammadreza Sadrkhah, Ghader Faraji, and S.. Amani. "Recrystallization of WE43 magnesium alloy processed via cyclic expansion extrusion (CEE)." 1 sd International Conf. on Mechanical Engineering, industrial and aerospace, Hamedan.
- Mohammadreza Sadrkhah, Ghader Faraji, and S.. Amani. "Mechanical properties of WE43 magnesium alloy processed via cyclic expansion extrusion (CEE)." 1 st International Conf. on Mechanical Engineering, industrial and aerospace,.
- Mohammadreza Sadrkhah, and Ghader Faraji. "Effect of Al content on mechanical properties and grain refinement of Mg alloy in PTCAP process." 3rd Int. Conf. on Mech and Aerospace Eng., Tehran.
- M.. Eskandarzadeh, Abolfazl Masoumi, and Ghader Faraji. "A novel strategy to speed up FE modeling of Ultrasonic Assisted ECAP Process." The Biennial International Conference on Experimental Solid Mechanics, Tehran.
- M.. Eskandarzadeh, Ghader Faraji, and Abolfazl Masoumi. "Experimental Modeling of friction coefficient values at different contact pressures." The Biennial International Conference on Experimental Solid Mechanics,.
- F.. Afshar, Mohammad Riazata, Karen Abrinia, and Ghader Faraji. "Introducing a novel SPD method for producing ultrafine grained tubes." 5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15,.
- Ghader Faraji, H.. Sohrabi, and H.. Abdolvand. "effect of tube backward extrusion process on the microstructure and mechanical properties of AZ31 alloy." 3rd International Congress on Nanoscience & Nanotechnology,.
- H.. Abdolvand, Ghader Faraji, and Mohammad Kazem Besharati Givi. "investigation of combined PTCAP and TBE as a novel SPD method for UFG thin walled cylindrical tubes." 3rd International Congress on Nanoscience & Nanotechnology,.
- Vah. Tavakkoli, Moh. Afrasiab, Ghader Faraji, and Mahmoud Mousavi Mashhadi. "Nano-grained 70/30 brass tubes produced by parallel tubular channel pressing (PTCAP) process." 2nd International Conference on Nanotechnology, İSTANBUL.
- Farshid Reshadi, and Ghader Faraji. "Simulation and determination of residual stress in tubes produced by during PTCAP process." The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran.
- Shorosh Hoseini, Seyed Ali Asghar Akbari Mousavi, and Ghader Faraji. "Mechanical properties of ultrafine grained AZ31 magnesium alloy tube processed by Parallel Tubular Channel Angular Pressing (PTCAP) at different passes." The Bi-Annual International Conference on Experimental Solid Mechanics (X-Mech 2014), Tehran.
Presented Papers in National Conferences
-
چنانچه بخشی از اطلاعات فردی جنابعالی در CV انگلیسی نمایش داده نمیشود به دلیل نبودن معادل لاتین آن میباشد و جهت تکمیل آن میتوانید به کارگزینی مراجعه بفرمایید
-
چنانچه برخی از فعالیتهای شما در CV انگلیسی نمایش داده نمیشود، ممکن است به دلیل نبودن معادل لاتین آن
باشد و
جهت
تکمیل ان می توانید به لیست فعالیتهای مربوطه مراجعه و فیلدهای خالی را پر کنید