کتاب های غیر از تالیف و ترجمه
Papers in International Journals
- Cyrus Zamani, Kengo Shimanoe, and Noboru Yamazoe. "Capacitive-type gas sensors combining silicon semiconductor and NaNO2-based solid electrolyte for NO2 detection." SENSORS AND ACTUATORS B-CHEMICAL 109, no. 2 (2005): 300-306.
- Cyrus Zamani, Kengo Shimanoe, and Noboru Yamazoe. "A new capacitive-type NO2 gas sensor combining an MIS with a solid electrolyte." SENSORS AND ACTUATORS B-CHEMICAL 109, no. 2 (2005): 216-220.
- Soroush Nazarpour, Cyrus Zamani, and Albert Cirera. "Fracture force analysis at the interface of Pd and SrTiO3." APPLIED SURFACE SCIENCE 255, no. 11 (2009): 6048-6053.
- Sara Abdollah Zadeh Ghom, Cyrus Zamani, Soroush Nazarpour, Teresa Andreu, and Joan Ramon Morante. "Oxygen sensing with mesoporous ceria–zirconia solid solutions." SENSORS AND ACTUATORS B-CHEMICAL 140, no. 1 (2009): 216-221.
- Cyrus Zamani, Olga Casals, Teresa Andreu, Joan Ramon Morante, and Albert Romano Rodriguez. "Detection of amines with chromium-doped WO3 mesoporous material." SENSORS AND ACTUATORS B-CHEMICAL 140, no. 2 (2009): 557-562.
- Cyrus Zamani. "Mesoporous Silica: A Suitable Adsorbent for Amines." Nanoscale Research Letters 4, no. 11 (2009): 1303-1308.
- Soroush Nazarpour, Olivier Jambois, Cyrus Zamani, Fatemeh Afshar, and Albert Cirera. "Stress distribution and hillock formation in Au/Pd thin films as a function of aging treatment in capacitor applications." APPLIED SURFACE SCIENCE 255, no. 22 (2009): 8995-8999.
- Cyrus Zamani, Elham Kamali, Elham Kamali Heidari, and Babak Raissi. "Nanocasting Synthesis of Ultrafine WO3 Nanoparticles for Gas Sensing Applications." Nanoscale Research Letters 5, no. 2 (2009): 370-373.
- Cyrus Zamani. "Micro and Mesoporous Materials for Emerging Applications." Recent Patents on Materials Science 3, no. 1 (2010): 57-67.
- Cyrus Zamani. "Effect of parameters on deposition pattern of ceramic nanoparticles in non-uniform AC electric field." JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS 22, no. 1 (2010): 40-46.
- Cyrus Zamani. "Residual Stress Relaxation Induced by Mass Transport Through Interface of the Pd/SrTiO3." Nanoscale Research Letters 5, no. 4 (2010): 709-713.
- Cyrus Zamani. "WO3-based NO2 sensors fabricated through low frequency AC electrophoretic deposition." SENSORS AND ACTUATORS B-CHEMICAL 146, no. 1 (2010): 165-170.
- Cyrus Zamani. "Metallic Electrodes; Restrictions and Future Prospective; A Survey on Recent Patents." Recent Patents on Materials Science 3, no. 2 (2010): 178-188.
- Cyrus Zamani. "Phase transformation studies on YSZ doped with alumina. Part 2: Yttria segregation." JOURNAL OF ALLOYS AND COMPOUNDS 505, no. 2 (2010): 534-541.
- Reza Riahifar, Ehsan Marzbanrad, Babak Raissi, and Cyrus Zamani. "A new technique for micro-patterning of nanoparticles on non-conductive substrate by low frequency AC electrophoresis." JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS 22, no. 9 (2011): 1218-1221.
- Hamid Hassani, Ehsan Marzbanrad, Cyrus Zamani, and Babak Raissi. "Effect of hydrothermal duration on synthesis of WO3 nanorods." JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS 22, no. 9 (2011): 1264-1268.
- Sasan Ghashghaie, Alimohammad Bazargan, Maryam Esmaeilpour Ganji, Ehsan Marzbanrad, Cyrus Zamani, Babak Raissi, Mansour Keyanpour-rad, and Mohammad Ali Bahrevar. "An investigation on the behavior of electrospun ZnO nanofibers under the application of low frequency AC electric fields." JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS 22, no. 9 (2011): 1303-1307.
- Sitra Esmaili, Mohammad Ebrahim Bahrololoom, and Cyrus Zamani. "Electrodeposition of NiFe/Cu multilayers from a single bath." Surface Engineering and Applied Electrochemistry 47, no. 2 (2011): 107-111.
- Soroush Nazarpour, Carlos Lopez-gandara, Cyrus Zamani, Fransisco Marcos Ramos, and Albert Cirera. "Modification of the oxygen diffusivity in limiting current oxygen sensors." SENSORS AND ACTUATORS B-CHEMICAL 155, no. 2 (2011): 489-499.
- Sitra Esmaili, Mohammad Ebrahim Bahrololoom, and Cyrus Zamani. "Giant magnetoresistance and super-paramagnetism in electrodeposited NiFe/Cu multilayers." Surface Engineering and Applied Electrochemistry 47, no. 4 (2011): 323-327.
- Cyrus Zamani, Reza Riahifar, Babak Raissi, and Ehsan Marzbanrad. "AC Electrophoresis, a New Technique for Deposition of Ceramic Nanoparticles; Introduction, Application and Mechanism." Key Engineering Materials 507, no. (2012): 41-45.
- Javad Esmaeilzadeh, Sasan Ghashghaie, Babak Raissi, Ehsan Marzbanrad, Cyrus Zamani, and Reza Riahifar. "Dispersant-assisted low frequency electrophoretically deposited TiO2 nanoparticles in non-aqueous suspensions for gas sensing applications." CERAMICS INTERNATIONAL 38, no. 7 (2012): 5613-5620.
- Hadi Ghasemi Nansa, Mahmoud Nili Ahmadabadi, Arya Mirsepasi, and Cyrus Zamani. "Nano- and microvoid formation in ultrafine-grained martensitic Fe-Ni-Mn steel after severe cold rolling." METALS AND MATERIALS INTERNATIONAL 20, no. 2 (2014): 201-205.
- Reza Riahifar, Babak Raissi, Cyrus Zamani, and Ehsan Marzbanrad. "Simulation of TiO2 particle trajectory in AC electric field." COMPUTATIONAL MATERIALS SCIENCE 108, no. - (2015): 183-191.
- Nader Setoudeh, Cyrus Zamani, and Mohammad Sajjadnejad. "Formation of ZnO/Ni0.6Zn0.4O Mixture Using Mechanical Milling of Zn-NiO." MATERIALS TRANSACTIONS 57, no. 9 (2016): 1597-1601.
- Habib Bagheri, Misagh Allahdadlalouni, and Cyrus Zamani. "Toward a Comprehensive Microextraction/Determination Unit: A chip silicon Rubber Polyaniline-based System and Its Direct Coupling With Gas Chromatography and Mass Spectrometry." JOURNAL OF SEPARATION SCIENCE 39, no. 20 (2016): 1-7.
- Maryam Azadeh, Cyrus Zamani, Abolghasem Ataei, and Joan Ramon Morante. "Three-dimensional Rice husk-Originated Mesoporous Silicon and its Electrical Properties." Materials Today Communications 14, no. - (2018): 125.
- Amir Hadian, Cyrus Zamani, and Frank Jorg Clemens. "Effect of sintering temperature on microstructural evolution of M48 high speed tool steel bonded NbC matrix cemented carbides sintered in inert atmosphere." International Journal of Refractory Metals and Hard Materials 74, no. - (2018): 20-27.
- Reza Esmaeilzadeh, Mahdiyar Salimi, Cyrus Zamani, Ali Mohammad Hadian, and Amir Hadian. "Effects of milling time and temperature on phase evolution of AISI 316 stainless steel powder and subsequent sintering." JOURNAL OF ALLOYS AND COMPOUNDS 766, no. - (2018): 341-348.
- Misagh Allahdadlalouni, Habib Bagheri, and Cyrus Zamani. "Immobilization of functionalized gold nanoparticles in a well-organized silicon-based microextracting chip followed by online thermal desorption-gas chromatography." MICROCHEMICAL JOURNAL 143, no. - (2018): 205-211.
- Amir Hadian, Cyrus Zamani, Lovro Gorjan, and Frank Jorg Clemens. "Thermoplastic processing and debinding behavior of NbC-M2 high speed steel cemented carbide." JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 263, no. - (2019): 91-100.
- Amir Hadian, Cyrus Zamani, and Frank Jorg Clemens. "Sintering behavior of NbC based cemented carbides bonded with M2 high speed steel." CERAMICS INTERNATIONAL 45, no. 7 (2019): 8616-8625.
- Maryam Azadeh, Cyrus Zamani, Abolghasem Ataei, Joan Ramon Morante, and Nader Setoudeh. "Role of milling parameters on the mechano-chemically synthesized mesoporous nanosilicon properties for Li-ion batteries anode." JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS 139, no. 4 (2019): .
- [] [], Cyrus Zamani, Claudia Schreiner, Renato Figi, and Frank Jorg Clemens. "Influence of carbon content and processing treatment of metallic binder on the outgassing and sintering of NbC based cemented carbide." CERAMICS INTERNATIONAL 46, no. 18 (2020): 28422-28431.
Papers in National Journals
- Reza Riahifar, Babak Raissi, Ehsan Marzbanrad, and Cyrus Zamani. "AC Electrophoresis; Deposition of Ceramic Nanaoparticles on In-plane Electrodes at Low Frequencies." International Journal of Engineering (IJE) 27, no. 5 (2014): 763.
- Maryam Azadeh, Cyrus Zamani, and Abolghasem Ataei. "Synthesis of Si/MgO/Mg2SiO4 Composite from Rice Husk-Originated Nano-Silica." Journal of Ultrafine Grained and Nanostructured Materials 49, no. 2 (2016): 92-96.
- Nader Setoudeh, Cyrus Zamani, and Mohammad Sajjadnejad. "Mechanochemical Synthesis of Nanostructured Mgx Ni1-xO Compound by Mg-NiO Mixture." Journal of Ultrafine Grained and Nanostructured Materials 50, no. 1 (2017): 51-59.
- Mehrdad Dorri, Cyrus Zamani, and Alireza Babaei. "Initial Discharge Capacity of Manganese Cobaltite as Anode Material for Lithium Ion Batteries." Journal of Ultrafine Grained and Nanostructured Materials 51, no. 2 (2018): 115-122.
- Seyed Sepehr Mohajerani, Cyrus Zamani, and Abolghasem Ataei. "Synthesis of Three - Dimensional Mesoporous Silicon from Rice Husk via SHS Route." Journal of Ultrafine Grained and Nanostructured Materials 52, no. 2 (2019): 149-153.
- Elnaz Shahsavari, Cyrus Zamani, Hossein Ahmadi Dermeni, Ali Mohammad Hadian, and Amir Hadian. "Cryomilling-Assisted Synthesis of Nanostructured Silicon." Journal of Ultrafine Grained and Nanostructured Materials 53, no. 2 (2020): 158-165.
Presented Papers in International Conferences
- Maryam Azadeh, Cyrus Zamani, Abolghasem Ataei, and Gota Morota. "Synthesis of High Quality Silica Nanoparticles From Rice Husk." 5th International Biennial Conference on Ultrafine Grained And Nanostructured Materials, Tehran.
- Mahdiyar Salimi, Reza Esmaeilzadeh, Amir Hadian, and Cyrus Zamani. "Microstructural Changes and Effect of Ceramic Phases During Cryogenic Attrition Milling of 316 Stainless Steel." 2nd International Conference on Ceramics, Tehran.
- Amir Hadian, Cyrus Zamani, and Frank Jorg Clemens. "Effect of different steel binders on microstructural and mechanical properties of NbC-Fe cemented carbides prepared from fine NbC powder." 15th Conference & Exhibitionof the European Ceramic Society, Budapest.
- Seyed Sepehr Mohajerani, Cyrus Zamani, and Abolghasem Ataei. "Synthesis of Silicon from Rice Husk via SHS Route." 6th International Conference on Materials Engineering and Metallurgy, Tehran.
- Cyrus Zamani. "Nanomaterials For Lithium-Ion Batteries." UFGNSM 2019,.
- Cyrus Zamani, Elnaz Shahsavari, AMIR HADIAN, and Ali Mohammad Hadian. "Effect of Cryomilling on Magnesium/Silica Mixtures For LiB Anodes." UFGNSM 2019,.
Presented Papers in National Conferences
- Mahyar Salimi, Reza Esmaeilzadeh, Amir Hadian, and Cyrus Zamani. "Cryogenic Milling of 316 Stainless Steel: Effect of Milling Parameters." 95 Steel Symposium, Tabriz.
- Ali Sokouti, Ali Mohammad Hadian, Cyrus Zamani, and Amir Hadian. "Thermal Shock Resistance of Cordierite Bodies Fabricated Using Domestic Raw Materials." The 12th Congress of Iranian Ceramic Society,.
- Elnaz Shahsavari, Cyrus Zamani, Ali Mohammad Hadian, and Amir Hadian. "Effect of cryogenic milling on mixing of Mg/SiO2 mixture for silicon production." The 12th Congress of Iranian Ceramic Society, Tehran.
- Hossein Ahmadi Dermeni, Cyrus Zamani, Alireza Babaei, and Ali Mohammad Hadian. "Synthesis of Nanostructured Hollow Silicon Using Self-Assembled Template." 9th International Conference on Materials Science and Metallurgical Engineering, Tehran.
Awards & Honors (in terms of: paper, project, etc...)
-
چنانچه بخشی از اطلاعات فردی جنابعالی در CV انگلیسی نمایش داده نمی
شود به دلیل نبودن معادل لاتین آن می باشد و جهت تکمیل آن می توانید به کارگزینی مراجعه بفرمایید
-
چنانچه برخی از فعالیتهای شما در CV انگلیسی نمایش داده نمی شود، ممکن است به دلیل نبودن معادل لاتین آن
باشد و
جهت
تکمیل ان می توانید به لیست فعالیتهای مربوطه مراجعه و فیلدهای خالی را پر کنید
