|
مقالات چاپ شده در نشریات بینالمللی
- Ali Parvizi, Reza Naghdabadi, and Jamal Arghavani. "Analysis of Al A359/SiCp Functionally Graded Cylinder Subjected to Internal Pressure and Temperature Gradient with Elastic-Plastic Deformation." JOURNAL OF THERMAL STRESSES 34, no. 10 (2011): 1054-1070.
- Ali Parvizi, and Karen Abrinia. "A two dimensional upper bound analysis of the ring rolling process with experimental and FEM verifications." INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 79, no. 79 (2014): 176-181.
- Ali Parvizi, Behzad Pasoodeh, Karen Abrinia, and Hamid Akbari. "Analysis of curvature and width of the contact area in asymmetrical rolling of wire." Journal of Manufacturing Processes 20, no. xxx (2015): xxx.
- Farshid Afrouz, and Ali Parvizi. "An analytical model of asymmetric rolling of unbounded clad sheets with shear effects." Journal of Manufacturing Processes xxx, no. xxx (2015): xxx.
- Tohid Mahmoudi, Ali Parvizi, Esmaeil Poursaeidi, and Abbas Rahi. "Thermo-mechanical analysis of functionally graded wheel-mounted brake disk." Journal of Mechanical Science and Technology 29, no. 10 (2015): 4197-4204.
- Ali Parvizi, Behzad Pasoodeh, and Karen Abrinia. "An analytical approach to asymmetrical wire rolling process with finite element verification." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY xxx, no. xxx (2015): xxx.
- Shahryar Alikarami, and Ali Parvizi. "Elasto-plastic analysis and finite element simulation of thick-walled functionally graded cylinder subjected to combined pressure and thermal loading." SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS 0, no. 0 (2016): 1-12.
- Ali Parvizi, and Farshid Afrouz. "Slab analysis of asymmetrical clad sheet bonded before rolling process." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY X, no. X (2016): 1-14.
- Ali Parvizi, Omid Rezapoor, and Mohammad Ali Safari. "Theoretical modeling, simulation and experimental studies of Al/Cu clad sheet forging." International Journal of Interactive Design and Manufacturing - IJIDeM x, no. x (2016): 1-9.
- Ali Parvizi, Shahryar Alikarami, and Mansoor Asgari. "Exact solution for thermoelastoplastic behavior of thick-walled functionally graded sphere under combined pressure and temperature gradient loading." JOURNAL OF THERMAL STRESSES 39, no. 9 (2016): 1152-1170.
- Fayyaz Nosouhi Dehnavi, and Ali Parvizi. "Investigation of thermo-elasto-plastic behavior of thick-walled spherical vessels with inner functionally graded coatings." MECCANICA x, no. x (2016): 1-18.
- Abolfazl Rezaei Aderiani, Masoud Shariat Panahi, and Ali Parvizi. "Simultaneous topology and size optimization of locomotive structure using multinary genetic algorithms." Journal of Mechanical Science and Technology 31, no. 3 (2017): 1283-1291.
- Behzad Pasoodeh, Ali Parvizi, and Hamid Akbari. "Investigation of microstructure and mechanical properties in asymmetrically rolled copper wire." Journal of the Brazilian Society of Mechanical Sciences and Engineering x, no. x (2017): x.
- Masoud Kardan, Ali Parvizi, and Ali Askari. "Experimental and Finite Element Results for Optimization of Punch Force and Thickness Distribution in Deep Drawing Process." ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING x, no. x (2017): x.
- Amin Seyed Nosrati, Ali Parvizi, Ali Afzal, and Vali Alimirzaloo. "Elasto-plastic analysis of thick-walled spherical vessels with an inner functionally graded material coating." Journal of Computational Applied Mechanics x, no. x (2017): x.
- Fayyaz Nosouhi, and Ali Parvizi. "Electrothermomechanical behaviors of spherical vessels with different configurations of functionally graded piezoelectric coating." JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES x, no. x (2017): 1045389X1774273.
- Masoud Kardan, Ali Parvizi, and Ali Askari. "Influence of process parameters on residual stresses in deep-drawing process with FEM and experimental evaluations." Journal of the Brazilian Society of Mechanical Sciences and Engineering 40, no. 3 (2018): 1-12.
- Nima Dabiri Farahani, Ali Parvizi, Ali Barooni, and Sina Anvari Naeini. "Optimum curved die profile for tube drawing process with fixed conical plug." INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY x, no. x (2018): 1-11.
- Fayyaz Nosouhi, Ali Parvizi, and Karen Abrinia. "Novel material tailoring method for internally pressurized FG spherical and cylindrical vessels." Acta Mechanica Sinica/Lixue Xuebao x, no. x (2018): 1-13.
- Behzad Pasoodeh, Ali Parvizi, and Hamid Akbari. "Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire." Journal of Computational Applied Mechanics 49, no. 1 (2018): 143-148.
- Seyed Mehdi Alavizadeh, Karen Abrinia, and Ali Parvizi. "Twisted Multi Channel Angular Pressing (TMCAP) as a Novel Severe Plastic Deformation Method." METALS AND MATERIALS INTERNATIONAL x, no. x (2019): .
- Ali Parvizi, and Hamidreza Rohani. "Application of artificial neural network and genetic algorithm to predict and optimize load and torque in T-section profile ring rolling." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE x, no. x (2019): 095440621986198.
- Seyed Pouria Hamidpour, Ali Parvizi, and Amin Seyed Nosrati. "Upper bound analysis of wire flat rolling with experimental and FEM verifications." MECCANICA 54, no. 14 (2019): 2247-2261.
- Amin Seyednosrati, Karen Abrinia, and Ali Parvizi. "An Applied Analytical Method for the Forward Extrusion of Metals." JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE x, no. x (2020): .
- Mohammad Saber Hashemi, Amir Akbari, and Ali Parvizi. "New Physically Consistent Yield Model to Optimize Material Design for Functionally Graded Vessels." Journal of Failure Analysis and Prevention 20, no. 2 (2020): 470-482.
- Ahmad Amin Zadeh, Ali Parvizi, and Mahmoud Moradi. "Multi-objective topology optimization of deep drawing dissimilar tailor laser welded blanks; experimental and finite element investigation." OPTICS AND LASER TECHNOLOGY 125, no. x (2020): 106029.
- Ahmad Amin Zadeh, Ali Parvizi, Rasoul Safdarian, and Davood Rahmatabadi. "Comparison between laser beam and gas tungsten arc tailored welded blanks via deep drawing." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE 235, no. 4 (2020): 673-688.
- Mehran Tamjidi Eskandar, Ali Parvizi, Davood Rahmatabadi, and . "Asymmetric accumulative roll bonding of aluminum/copper composite sheets." PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS xx, no. xx (2020): 146442072098048.
- منصور عسکری، علی پرویزی و شهریار علی کرمی. "تحلیل شروع سیلان در مخازن کروی جداره ضخیم FG تحت بارگذاری همزمان فشاری و گرادیان دمایی." Journal of solid mechanics هفتم، دوم (1393): 49-57.
|
|
|
|
|
|