مقالات چاپ شده در نشریات بینالمللی
- Majid Reza Ayatollahi , and Alireza Torabi. "Failure assessment of notched polycrystalline graphite under tensile - shear loading." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 528, no. 18 (2011): 5685-5695.
- Alireza Torabi, and Morteza Taherkhanib . "Extensive data of notch shape factors for V - notched Brazilian disc specimen under mixed mode loading." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 528, no. 29,30 (2011): 8599-8609.
- Alireza Torabi, and Mohamad Reza Jafarinezhad . "Comprehensive data for rapid calculation of notch stress intensity factors in U - notched Brazilian disc specimen under tensile - shear loading." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 541, no. 15 (2012): 153-142.
- Alireza Torabi. "Estimation of tensile load - bearing capacity of ductile metallic materials weakened by a V - notch : The equivalent material concept." MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 536, no. --- (2012): 249-255.
- Alireza Torabi, and M Heidary Khavas . "Fatigue Crack Growth in a Solid Circular Shaft Under Fully Reversed Rotating Bending." Journal of Failure Analysis and Prevention 12, no. 4 (2012): 419-426.
- Alireza Torabi. "Ultimate Bending Strength Evaluation of U-Notched Ductile Steel Samples Under Large-Scale Yielding Conditions." INTERNATIONAL JOURNAL OF FRACTURE 180, no. 2 (2013): 261-268.
- Alireza Torabi. "Sudden Fracture from U-Notches in Fine-Grained Isostatic Graphite Under Mixed Mode I/II Loading." INTERNATIONAL JOURNAL OF FRACTURE 181, no. 2 (2013): 309-316.
- Alireza Torabi. "Fracture Assessment of U-Notched Graphite Plates Under Tension." INTERNATIONAL JOURNAL OF FRACTURE 181, no. 2 (2013): 285-292.
- Alireza Torabi, and Mohammad Reza Mohammad Aliha. "Determination of permissible defect size for solid axles loaded under fully-reversed rotating bending." Engineering Solid Mechanics 1, no. 1 (2013): 27-36.
- Alireza Torabi. "Wide range brittle fracture curves for U-notched components based on UMTS model." Engineering Solid Mechanics 1, no. 2 (2013): 57-68.
- Alireza Torabi. "Failure curves for predicting brittle fracture in V-notched structural components loaded under mixed tension/shear: An advanced engineering design package." Engineering Solid Mechanics 1, no. 3 (2013): 99-118.
- Alireza Torabi, Mehdi Fakoorsaghieh, and Ebrahim Pirhadi. "Tensile fracture in coarse-grained polycrystalline graphite weakened by a U-shaped notch." ENGINEERING FRACTURE MECHANICS 111, no. 1 (2013): 77-85.
- Alireza Torabi. "The Equivalent Material Concept: Application to failure of O-notches." Engineering Solid Mechanics 1, no. 4 (2013): 129-140.
- Alireza Torabi, and Filippo Berto. "Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density." STRENGTH OF MATERIALS 45, no. 6 (2013): 635-647.
- Alireza Torabi, and Majid Reza Ayatollahi. "Compressive brittle fracture in V-notches with end holes." EUROPEAN JOURNAL OF MECHANICS A-SOLIDS 45, no. 1 (2013): 32-40.
- Alireza Torabi, Mehdi Fakoorsaghieh, and Ebrahim Pirhadi. "Fracture analysis of U-notched disc-type graphite specimens under mixed mode loading." INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 51, no. 6 (2013): 1287-1298.
- Alireza Torabi, and Filippo Berto. "Notch Fracture Toughness Evaluation for a Brittle Graphite Material." Materials Performance and Characterization 3, no. 3 (2014): 1-16.
- Alireza Torabi, and Shahab Amininejad. "Brittle fracture in V-notches with end holes." INTERNATIONAL JOURNAL OF DAMAGE MECHANICS ****, no. **** (2014): ****.
- Alireza Torabi, and Filippo Berto. "Mixed mode fracture assessment of U-notched graphite Brazilian disk specimens by means of the local energy." STRUCTURAL ENGINEERING AND MECHANICS 50, no. 6 (2014): 723-740.
- Alireza Torabi, and Ebrahim Pirhadi. "Stress-based criteria for brittle fracture in key-hole notches under mixed mode loading." EUROPEAN JOURNAL OF MECHANICS A-SOLIDS 49, no. 1 (2014): 1-12.
- Alireza Torabi, Mehdi Fakoorsaghieh, and Mohammadali Darbani. "Pure shear fracture study in a brittle graphite material containing a U-notch." INTERNATIONAL JOURNAL OF DAMAGE MECHANICS 23, no. 6 (2014): 839-854.
- Alireza Torabi, and Filippo Berto. "Strain energy density to assess mode II fracture in U-notched disk-type graphite plates." INTERNATIONAL JOURNAL OF DAMAGE MECHANICS 23, no. 7 (2014): 917-930.
- Alireza Torabi, and Seyyed Mostafa Abedinasab. "Fracture Study on Key-Hole Notches Under Tension: Two Brittle Fracture Criteria and Notch Fracture Toughness Measurement by the Disk Test." EXPERIMENTAL MECHANICS ****, no. **** (2014): ****.
- Alireza Torabi. "Closed-form expressions of mode I apparent notch fracture toughness for key-hole notches." JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN 49, no. 8 (2014): 583-591.
- David A. Cendon, Alireza Torabi, and Manuel Elices. "Fracture assessment of graphite V-notched and U-notched specimens by using the cohesive crack model." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 38, no. 5 (2014): 563-573.
- Alireza Torabi, and Seyyed Mostafa Abedinasab. "Brittle fracture in key-hole notches under mixed mode loading: Experimental study and theoretical predictions." ENGINEERING FRACTURE MECHANICS 134, no. 1 (2015): 35-53.
- Majid Reza Ayatollahi, Alireza Torabi, and Mostafa Firoozabadi. "Theoretical and experimental investigation of brittle fracture in V-notched PMMA specimens under compressive loading." ENGINEERING FRACTURE MECHANICS 135, no. 1 (2015): 187-205.
- Alireza Torabi, and Shahab Amininejad. "Fracture assessment of VO-notches under mode II loading: Experiments and theories." THEORETICAL AND APPLIED FRACTURE MECHANICS 75, no. 1 (2015): 59-69.
- Alireza Torabi, Alberto Campagnolo, and Filippo Berto. "Experimental and theoretical investigation of brittle fracture in key-hole notches under mixed mode I/II loading." ACTA MECHANICA 226, no. 7 (2015): 2313-2322.
- Alireza Torabi, and Seyyed Mostafa Abedinasab. "Mode II notch fracture toughness measurement for key-hole notches by the disk test." JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN 50, no. 4 (2015): 264-275.
- Alireza Torabi, Alberto Campagnolo, and Filippo Berto. "Local strain energy density to predict mode II brittle fracture in Brazilian disk specimens weakened by V-notches with end holes." MATERIALS & DESIGN 69, no. 1 (2015): 22-29.
- Alireza Torabi, Alberto Campagnolo, and Filippo Berto. "Tensile fracture analysis of V-notches with end holes by means of the local energy." Physical Mesomechanics 18, no. 3 (2015): 194-202.
- Alireza Torabi, Mostafa Firoozabadi, and Majid Reza Ayatollahi. "Brittle fracture analysis of blunt V-notches under compression." INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 67-68, no. * (2015): 219-230.
- Alireza Torabi, Rasool Habibi, and Behrooz Mohammad Hosseini. "On the Ability of the Equivalent Material Concept in Predicting Ductile Failure of U-Notches under Moderate- and Large-Scale Yielding Conditions." Physical Mesomechanics 18, no. 4 (2015): 337-347.
- Alireza Torabi, and Mehran Alaei. "Mixed-mode ductile failure analysis of V-notched Al 7075-T6 thin sheets." ENGINEERING FRACTURE MECHANICS 150, no. 150 (2015): 70-95.
- Alireza Torabi, and Rasool Habibi. "Investigation of ductile rupture in U-notched Al 6061-T6 plates under mixed mode loading." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 39, no. 5 (2015): 551-565.
- Majid Reza Ayatollahi, Alireza Torabi, and Abdol Saleh Rahimi. "Brittle fracture assessment of engineering components in the presence of notches: a review." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 39, no. 3 (2015): 267-291.
- Majid Reza Ayatollahi, Alireza Torabi, and Bahador Bahrami. "On the necessity of using critical distance model in mixed mode brittle fracture prediction of V-notched Brazilian disk specimens under negative mode І conditions." THEORETICAL AND APPLIED FRACTURE MECHANICS xxxx, no. xxxx (2016): xxxx.
- Alireza Torabi, and Mehran Alaei. "Application of the equivalent material concept to ductile failure prediction of blunt V-notches encountering moderate-scale yielding." INTERNATIONAL JOURNAL OF DAMAGE MECHANICS xxxx, no. xxxx (2016): xxxx.
- Alireza Torabi, Alberto Campagnolo, and Filippo Berto. "Mode II Brittle Fracture Assessment of Key-Hole Notches by Means of the Local Energy." JOURNAL OF TESTING AND EVALUATION 44, no. 3 (2016): 1261-1270.
- Alireza Torabi, Filippo Berto, and Alberto Campagnolo. "Elastic-plastic fracture analysis of notched Al 7075-T6 plates by means of the local energy combined with the equivalent material concept." Physical Mesomechanics 19, no. 2 (2016): 204-214.
- Behnam Saboori, Majid Reza Ayatollahi, Alireza Torabi, and Filippo Berto. "Mixed mode I/III brittle fracture in round-tip V-notches." THEORETICAL AND APPLIED FRACTURE MECHANICS 83, no. xxxx (2016): 135-151.
- Alireza Torabi, Alberto Campagnolo, and Filippo Berto. "Tensile fracture analysis of key-hole notches by means of the strain energy density." STRENGTH OF MATERIALS 48, no. 2 (2016): 259-269.
- Alireza Torabi, Bahador Bahrami, and Majid Reza Ayatollahi. "Mixed mode I/II brittle fracture in V-notched Brazilian disk specimens under negative mode I conditions." Physical Mesomechanics 19, no. 3 (2016): 332-348.
- Alireza Torabi, and Mohammad Keshavarzian. "Evaluation of the load-carrying capacity of notched ductile plates under mixed mode loading." THEORETICAL AND APPLIED FRACTURE MECHANICS 85, no. 1 (2016): 375-386.
- Alireza Torabi, Alberto Campagnolo, and Filippo Berto. "A successful combination of the equivalent material concept and the averaged strain energy density criterion for predicting crack initiation from blunt V-notches in ductile aluminum plates under mixed mode loading." Physical Mesomechanics 19, no. 4 (2016): 382-391.
- Alireza Torabi, and Behrooz Mohammad Hosseini. "Large plasticity induced crack initiation from U-notches in thin aluminum sheets under mixed mode loading." Engineering Solid Mechanics 5, no. 1 (2016): 39-60.
- Alireza Torabi, Hamid Reza Majidi, and Majid Reza Ayatollahi. "Brittle failure of key-hole notches under mixed mode I/II loading with negative mode I contributions." ENGINEERING FRACTURE MECHANICS 168, no. 1 (2016): 51-72.
- Majid Reza Ayatollahi, Alireza Torabi, and Bahador Bahrami. "Comprehensive notch shape factors for V-notched Brazilian disk specimens loaded under mixed mode I/II from pure opening mode to pure closing mode." ARCHIVE OF APPLIED MECHANICS 87, no. 2 (2016): 1-15.
- Alireza Torabi, Alberto Campagnolo, and Filippo Berto. "Mixed mode I/II crack initiation from U-notches in Al 7075-T6 thin plates by large-scale yielding regime." THEORETICAL AND APPLIED FRACTURE MECHANICS 86, no. 1 (2016): 284-291.
- Alireza Torabi, Alberto Campagnolo, and Filippo Berto. "Static Strength of V-Notches With End Holes Under Combined Tension-Shear Loading: Experimental Measurement by the Disk Test and Theoretical Prediction by the Local Energy." JOURNAL OF TESTING AND EVALUATION 45, no. 3 (2017): 732-743.
- Alireza Torabi, Filippo Berto, and Seyyed Mohammad Javad Razavi. "Ductile failure prediction of thin notched aluminum plates subjected to combined tension-shear loading." THEORETICAL AND APPLIED FRACTURE MECHANICS xxxx, no. xxxx (2017): xxxx.
- Behnam Saboori, Alireza Torabi, Majid Reza Ayatollahi, and Filippo Berto. "Experimental verification of two stress-based criteria for mixed mode I/III brittle fracture assessment of U-notched components." ENGINEERING FRACTURE MECHANICS 182, no. xxxx (2017): 229-244.
- Alireza Torabi, Alberto Campagnolo, and Filippo Berto. "LARGE-SCALE YIELDING FAILURE PREDICTION OF NOTCHED DUCTILE PLATES BY MEANS OF THE LINEAR ELASTIC NOTCH FRACTURE MECHANICS." STRENGTH OF MATERIALS 49, no. 2 (2017): 224-233.
- Alireza Torabi, Filippo Berto, and Seyyed Mohammad Javad Razavi. "Tensile failure prediction of U-notched plates under moderate-scale and large-scale yielding regimes." THEORETICAL AND APPLIED FRACTURE MECHANICS xxxx, no. xxxx (2017): xxxx.
- Alireza Torabi. "Tensile failure in blunt V-notched ductile members: A new formulation of the Equivalent Material Concept." ENGINEERING FRACTURE MECHANICS 184, no. xxxx (2017): 1-13.
- Bahador Bahrami, Majid Reza Ayatollahi, and Alireza Torabi. "Predictions of fracture load, crack initiation angle, and trajectory for V-notched Brazilian disk specimens under mixed mode I/II loading with negative mode I contributions." INTERNATIONAL JOURNAL OF DAMAGE MECHANICS 41, no. 3 (2017): 688-699.
- Alireza Torabi, Filippo Berto, Alberto Campagnolo, and Javad Akbardoost. "Averaged strain energy density criterion to predict ductile failure of U-notched Al 6061-T6 plates under mixed mode loading." THEORETICAL AND APPLIED FRACTURE MECHANICS 91, no. xx (2017): 86-93.
- Sergio Cicero, Alireza Torabi, Virginia Madrazo, and Peyman Azizi. "Prediction of fracture loads in PMMA U‐notched specimens using the equivalent material concept and the theory of critical distances combined criterion." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES xxxx, no. xxxx (2017): xxxx.
- Alireza Torabi, Siavash Etesam, Alberto Sapora, and Pietro Cornetti. "Size effects on brittle fracture of Brazilian disk samples containing a circular hole." ENGINEERING FRACTURE MECHANICS 186, no. xxxx (2017): 496-503.
- Alireza Torabi, and Behnam Saboori. "Experimental and theoretical investigation of mixed mode I/III brittle fracture of U-notched polystyrene components." JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN xxxx, no. xxxx (2017): 1-11.
- Hamid Reza Majidi, Majid Reza Ayatollahi, and Alireza Torabi. "On the use of the extended finite element and incremental methods in brittle fracture assessment of key-hole notched polystyrene specimens under mixed mode I/II loading with negative mode I contributions." ARCHIVE OF APPLIED MECHANICS xxxx, no. xxxx (2017): 1-26.
- Alireza Torabi, Abdol Saleh Rahimi, and Majid Reza Ayatollahi. "Tensile fracture analysis of a ductile polymeric material weakened by Unotches." POLYMER TESTING 64, no. xxxx (2017): 117-126.
- Alireza Torabi, Abdol Saleh Rahimi, and Majid Reza Ayatollahi. "Fracture study of a ductile polymer-based nanocomposite weakened by blunt V-notches under mode I loading: Application of the Equivalent Material Concept." THEORETICAL AND APPLIED FRACTURE MECHANICS 94, no. xxxx (2018): 26-33.
- Juan Diego Fuentes, Sergio Cicero, Filippo Berto, Alireza Torabi, Virginia Madrazo, and Peyman Azizi. "Estimation of Fracture Loads in AL7075-T651 Notched Specimens Using the Equivalent Material Concept Combined with the Strain Energy Density Criterion and with the Theory of Critical Distances." Metals 87, no. 8 (2018): 1-18.
- Behnam Saboori, Alireza Torabi, Filippo Berto, and Seyyed Mohammad Javad Razavi. "Averaged strain energy density to assess mixed mode I/III fracture of U-notched GPPS samples." STRUCTURAL ENGINEERING AND MECHANICS 65, no. 6 (2018): 699-706.
- Hamid Reza Majidi, Mohammad Esmaeil Golmakani, and Alireza Torabi. "On combination of the equivalent material concept and J-integral criterion for ductile failure prediction of U-notches subjected to tension." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 4, no. 7 (2018): 1476-1487.
- Abdol Saleh Rahimi, Majid Reza Ayatollahi, and Alireza Torabi. "Fracture study in notched ductile polymeric plates subjected to mixed mode I/II loading: Application of equivalent material concept." EUROPEAN JOURNAL OF MECHANICS A-SOLIDS 70, no. xxxx (2018): 37-43.
- Alberto Sapora, Alireza Torabi, Siavash Etesam, and Pietro Cornetti. "Finite fracture mechanics crack initiation from a circular hole." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 41, no. 7 (2018): 1627-1636.
- Alireza Torabi, Mohammad Hassan Kalantari, and Mohammad Reza Mohammad Aliha. "Fracture analysis of dissimilar Al‐Al friction stir welded joints under tensile/shear loading." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 41, no. 9 (2018): 2040-2053.
- Alireza Torabi, Majid Reza Ayatollahi, and Marco Colussi. "Compressive brittle fracture prediction in blunt V-notched PMMA specimens by means of the strain energy density approach." Physical Mesomechanics 21, no. 2 (2018): 104-109.
- Hamid Reza Majidi, Alireza Torabi, and Mohammad Esmaeil Golmakani. "J-integral expression for mixed mode I/II ductile failure prediction of U-notched Al 6061-T6 plates under large-scale yielding regime." ENGINEERING FRACTURE MECHANICS 195, no. xx (2018): 253-266.
- Behnam Saboori, Alireza Torabi, and Saber Keshavarz Mohammadian. "Experimental and stress-based theoretical studies on mixed mode I/III fracture of round-tip V-notched Polystyrene specimens." THEORETICAL AND APPLIED FRACTURE MECHANICS 95, no. xx (2018): 283-305.
- Hamid Reza Majidi, Majid Reza Ayatollahi, Alireza Torabi, and Ashkan Zaheri. "Energy-based assessment of brittle fracture in VO-notched polymer specimens under combined compression-shear loading conditions." INTERNATIONAL JOURNAL OF DAMAGE MECHANICS 0, no. 0 (2018): 1-16.
- Alireza Torabi, Behnam Saboori, and Majid Reza Ayatollahi. "Mode III notch fracture toughness assessment for various notch features." Physical Mesomechanics 21, no. 4 (2018): 320-332.
- Hamid Reza Majidi, Seyyed Mohammad Javad Razavi, and Alireza Torabi. "Application of EMC‐J criterion to fracture prediction of U‐ notched polymeric specimens with nonlinear behaviour." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 42, no. 1 (2018): 352-362.
- Javad Akbardoost, Alireza Torabi, and Hossein Amani. "Predicting the fracture trajectory in U, VO, and key-hole notched specimens using an incremental approach." ENGINEERING FRACTURE MECHANICS 200, no. xx (2018): 189-207.
- Abdol Saleh Rahimi, Majid Reza Ayatollahi, and Alireza Torabi. "Ductile failure analysis of blunt V-notched epoxy resin plates subjected to combined tension-shear loading." POLYMER TESTING 70, no. xx (2018): 57-66.
- Alireza Torabi, and Mohsen Kamyab. "Notch ductile failure with significant strain‐hardening: The modified equivalent material concept." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 42, no. 2 (2018): 439-453.
- Alireza Torabi, Behnam Saboori, Saber Keshavarz Mohammadian, and Majid Reza Ayatollahi. "Brittle failure of PMMA in the presence of blunt V-notches under combined tension-tear loading: Experiments and stress-based theories." POLYMER TESTING 72, no. xx (2018): 94-109.
- Alireza Torabi, Hamid Reza Majidi, and Majid Reza Ayatollahi. "Fracture study in notched graphite specimens subjected to mixed mode I/II loading: Application of XFEM based on the cohesive zone model." THEORETICAL AND APPLIED FRACTURE MECHANICS 99, no. xx (2018): 60-70.
- Alireza Torabi, Abdol Saleh Rahimi, and Majid Reza Ayatollahi. "Mixed mode І/ІІ fracture prediction of blunt V-notched nanocomposite specimens with nonlinear behavior by means of the Equivalent Material Concept." COMPOSITES PART B-ENGINEERING 154, no. xx (2018): 363-373.
- Alireza Torabi, and Mohsen Kamyab. "The fictitious material concept." ENGINEERING FRACTURE MECHANICS 209, no. xx (2019): 17-31.
- Alireza Torabi, Behnam Saboori, and Ali Hashemi. "Pure mode III fracture of U-notched specimens made of PMMA and GPPS polymers: Experimental and theoretical evaluations." ENGINEERING FRACTURE MECHANICS 211, no. xxxx (2019): 70-81.
- Alireza Torabi, and Mohsen Kamyab. "Mixed mode I/II failure prediction of thin U-notched ductile steel plates with significant strain-hardening and large strain-to-failure: The Fictitious Material Concept." EUROPEAN JOURNAL OF MECHANICS A-SOLIDS 75, no. xxxx (2019): 225-236.
- Fernando Javier Gomez, and Alireza Torabi. "Application of the equivalent material concept to the study of the ductile failure due to U-notches." INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING 172, no. xxxx (2019): 65-69.
- Alireza Torabi, Hamid Reza Majidi, Sergio Cicero, F.T. Ibanez Gutierrez, and Juan Diego Fuentes. "Experimental verification of the Fictitious Material Concept for tensile fracture in short glass fibre reinforced polyamide 6 notched specimens with variable moisture." ENGINEERING FRACTURE MECHANICS 212, no. xxxx (2019): 95-105.
- Hamid Reza Fattahi Amirdehi, Mohammad Reza Mohammad Aliha, Ali Moniri, and Alireza Torabi. "Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results – A statistical analysis." CONSTRUCTION AND BUILDING MATERIALS 213, no. 1 (2019): 483-491.
- Hamid Reza Majidi, Alireza Torabi, Mahmood Zabihi, Seyed Mohammad Javad Razavi, and Filippo Berto. "Energy-based ductile failure predictions in cracked friction-stir welded joints." ENGINEERING FAILURE ANALYSIS 102, no. 1 (2019): 327-337.
- Mohammad Reza Mohammad Aliha, Mohammad Hassan Kalantari, Seyed Mohammad Navid Ghoreishi, Alireza Torabi, and Siavash Etesam. "Mixed mode I/II crack growth investigation for bi-metal FSW aluminum alloy AA7075-T6/pure copper joints." THEORETICAL AND APPLIED FRACTURE MECHANICS 103, no. xxx (2019): .
- Alireza Torabi, and Ebrahim Pirhadi. "Notch failure in laminated composites under opening mode: The Virtual Isotropic Material Concept." COMPOSITES PART B-ENGINEERING 172, no. 1 (2019): 61-75.
- Alireza Torabi, Bahador Bahrami, and Majid Reza Ayatollahi. "Experimental determination of the notch stress intensity factor for sharp Vnotched specimens by using the digital image correlation method." THEORETICAL AND APPLIED FRACTURE MECHANICS 103, no. 2 (2019): .
- Alireza Torabi, Filippo Berto, and Alberto Sapora. "Finite Fracture Mechanics Assessment in Moderate and Large Scale Yielding Regimes." Metals 9, no. 5 (2019): 1-10.
- Alireza Torabi, and Ebrahim Pirhadi. "On the ability of the notch fracture mechanics in predicting the last-ply-failure of blunt V-notched laminated composite specimens: A hard problem can be easily solved by conventional methods." ENGINEERING FRACTURE MECHANICS 217, no. 1 (2019): .
- Alireza Torabi, Abdol Saleh Rahimi, and Majid Reza Ayatollahi. "Elastic-plastic fracture assessment of CNT-reinforced epoxy/nanocomposite specimens weakened by U-shaped notches under mixed mode loading." COMPOSITES PART B-ENGINEERING 176, no. 1 (2019): .
- Alireza Torabi, Majid Reza Ayatollahi, Mohammad Torabi, and Abdol Saleh Rahimi. "Crack growth onset in thin aluminum sheets under mixed mode I/II loading: A new form of the Equivalent Material Concept." THIN-WALLED STRUCTURES 144, no. 1 (2019): .
- Alireza Torabi, and Ebrahim Pirhadi. "Extension of the virtual isotropic material concept to mixed mode I/II loading for predicting the last-ply-failure of U-notched glass/epoxy laminated composite specimens." COMPOSITES PART B-ENGINEERING 176, no. 1 (2019): .
- Bahador Bahrami, Majid Reza Ayatollahi, and Alireza Torabi. "Application of digital image correlation method for determination of mixed mode stress intensity factors in sharp notches." OPTICS AND LASERS IN ENGINEERING 124, no. 1 (2019): .
- Alireza Torabi, and Ebrahim Pirhadi. "Failure analysis of round-tip V-notched laminated composite plates under mixed mode I/II loading." THEORETICAL AND APPLIED FRACTURE MECHANICS 104, no. 3 (2019): .
- Behnam Saboori, and Alireza Torabi. "Out-of-plane shear fracture analysis of PMMA and GPPS polymers weakened by round-tip V-notches." THEORETICAL AND APPLIED FRACTURE MECHANICS 104, no. 1 (2019): .
- Alireza Torabi, Seyed Mohammad Javad Razavi, Filippo Berto, and Majid Reza Ayatollahi. "ON SUITABILITY OF THE AVERAGED STRAIN ENERGY DENSITY CRITERION IN PREDICTING MIXED MODE I/II BRITTLE FRACTURE OF BLUNT V-NOTCHES WITH NEGATIVE MODE I CONTRIBUTIONS." STRENGTH OF MATERIALS 51, no. 5 (2019): 770-785.
- Alireza Torabi, Mohammad Hassan Kalantari, Mohammad Reza Mohammad Aliha, and Seyed Mohammad Navid Ghoreishi. "Pure mode II fracture analysis of dissimilar Al-Al and Al-Cu friction stir welded joints using the generalized MTS criterion." THEORETICAL AND APPLIED FRACTURE MECHANICS 104, no. 2 (2019): .
- Alireza Torabi, Bahador Bahrami, and Majid Reza Ayatollahi. "On the use of digital image correlation method for determining the stress field at blunt V-notch neighborhood." ENGINEERING FRACTURE MECHANICS 223, no. 1 (2019): .
- Bahador Bahrami, Majid Reza Ayatollahi, and Alireza Torabi. "In-situ brittle fracture analysis of sharp V-notched components using digital image correlation." THEORETICAL AND APPLIED FRACTURE MECHANICS 106, no. 1 (2020): .
- Abdol Saleh Rahimi, Majid Reza Ayatollahi, and Alireza Torabi. "Elastic-plastic damage prediction in notched epoxy resin specimens under mixed mode I/II loading using two virtual linear elastic failure criteria." INTERNATIONAL JOURNAL OF DAMAGE MECHANICS xxxx, no. xxxx (2020): xxxx-xxxx.
- Alireza Torabi, Hamid Reza Majidi, Hossein Amani, and Javad Akbardoost. "Implementation of XFEM for fracture prediction of VO-notched brittle specimens." EUROPEAN JOURNAL OF MECHANICS A-SOLIDS 81, no. xxxx (2020): xxxx-xxxx.
- Sergio Cicero, Juan Diego Fuentes, and Alireza Torabi. "Using the Equivalent Material Concept and the Average Strain Energy Density to Analyse the Fracture Behaviour of Structural Materials." Applied Sciences-Basel 10, no. xxxx (2020): 1-13.
- Sergio Cicero, Alireza Torabi, F.T. Ibanez-Gutierrez, and Peyman Azizi. "Fracture Load Predictions in Short Glass Fiber Reinforced Polyamide 6 U-Notched Specimens Combining the Equivalent Material Concept and the Theory of Critical Distances." JOURNAL OF TESTING AND EVALUATION 48, no. 2 (2020): 1226-1251.
- Alireza Torabi, and Behnam Shahbazian. "Notch tip plastic zone determination by extending Irwin’s model." THEORETICAL AND APPLIED FRACTURE MECHANICS 108, no. 102643 (2020): .
- Alireza Torabi, Mahdi Jabbari, and Javad Akbardoost. "Scaling effects on notch fracture toughness of graphite specimens under mode I loading." ENGINEERING FRACTURE MECHANICS 235, no. 107153 (2020): .
- Alireza Torabi, Mahdi Jabbari, and Javad Akbardoost. "Mixed mode notch fracture toughness assessment of quasi-brittle polymeric specimens at different scales." THEORETICAL AND APPLIED FRACTURE MECHANICS 109, no. 102682 (2020): .
- Faezeh Hatami, Majid Reza Ayatollahi, and Alireza Torabi. "Limit curves for brittle fracture in key-hole notches under mixed mode I/III loading based on stress-based criteria." EUROPEAN JOURNAL OF MECHANICS A-SOLIDS 85, no. 104089 (2020): .
- Behnam Saboori, Alireza Torabi, and Mohammad Reza Kamjoo. "Evaluation of the equivalent material concept in mixed mode I/III fracture estimation of V-notched Al7075-T6 plates." ENGINEERING FRACTURE MECHANICS 237, no. 107259 (2020): .
- Alireza Torabi, and Ebrahim Pirhadi. "Experimental verification of the virtual isotropic material concept for the last-ply-failure of U-notched quasiisotropic E-glass/epoxy composite laminates under tension-shear loading." Journal of Industrial Textiles 0, no. 0 (2020): .
- Alireza Torabi, Behnam Saboori, and Mohammad Reza Kamjoo. "Out-of-plane ductile failure of notch: Evaluation of Equivalent Material Concept." STRUCTURAL ENGINEERING AND MECHANICS 75, no. 5 (2020): 559-569.
- Alireza Torabi, Behnam Saboori, and Ali Ghelich. "Fracture of U- and V-notched Al6061-T6 plates: The first examination of the Fictitious Material Concept under mixed mode I/III loading." THEORETICAL AND APPLIED FRACTURE MECHANICS 109, no. 102766 (2020): .
- Alireza Torabi, and Behnam Shahbazian. "Semi-analytical estimation of the effective plastic zone size at U-notch neighborhood in thin sheets under mixed mode I/ II loading." ENGINEERING FRACTURE MECHANICS 239, no. 107323 (2020): .
- Alireza Torabi, Saeed Mohammadi, Behnam Saboori, and Majid Reza Ayatollahi. "On the use of the Fictitious Material Concept in estimating the ultimate load of keyhole notched AA6061-T6 specimens under large tension-torsion deformations." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES xxxx, no. xxxx (2020): 1-17.
- Sahel Shahbaz, Majid Reza Ayatollahi, Alireza Torabi, and Sergio Cicero. "Fracture Behavior of Two Biopolymers Containing Notches: Eects of Notch Tip Plasticity." Applied Sciences-Basel 10, no. 23 (2020): 1-15.
- Alireza Torabi, Kazem Hamidi, Abdol Saleh Rahimi, and Sergio Cicero. "Notch Fracture in Polymeric Specimens under Compressive Stresses: The Role of the Equivalent Material Concept in Estimating the Critical Stress of Polymers." Applied Sciences-Basel 11, no. 2104 (2021): .
- Alireza Torabi, Hadi Sadeghian, and Majid Reza Ayatollahi. "Mixed mode I/II crack propagation in stainless steel 316L sheets by large plastic deformations: Prediction of critical load by combining LEFM with fictitious material concept." ENGINEERING FRACTURE MECHANICS 247, no. 107657 (2021): .
- Marcos Sanchez, Sergio Cicero, Alireza Torabi, and Majid Reza Ayatollahi. "Critical Load Prediction in Notched E/Glass–Epoxy-Laminated Composites Using the Virtual Isotropic Material Concept Combined with the Average Strain Energy Density Criterion." Polymers 13, no. 1057 (2021): .
- Alireza Torabi, Behnam Saboori, Filippo Berto, and Seyyed Mohammad Javad Razavi. "STRAIN ENERGY DENSITY-PREDICTED BRITTLE FRACTURE OF U-NOTCHED COMPONENTS UNDER COMBINED TENSION/TEAR LOADING." STRENGTH OF MATERIALS 53, no. 1 (2021): 1-10.
- Alireza Torabi, Kazem Hamidi, Behnam Shahbazian, Sergio Cicero, and Filippo Berto. "Extension of the Equivalent Material Concept to Compressive Loading: Combination with LEFM Criteria for Fracture Prediction of Keyhole Notched Polymeric Samples." Applied Sciences-Basel 11, no. 4138 (2021): 1-16.
- Shahrokh Shams, Alireza Torabi, Mahdi Fatehi Narab, and Mohammad-ali Amiri Atashgah. "Free vibration analysis of a laminated beam using dynamic stiffness matrix method considering delamination." THIN-WALLED STRUCTURES 166, no. 107952 (2021): .
- Alireza Torabi, Behnam Shahbazian, Mirmilad Mirsayar, and Sergio Cicero. "A Methodology to Determine the Effective Plastic Zone Size Around Blunt V-Notches under Mixed Mode I/II Loading and Plane-Stress Conditions." Metals 11, no. 1042 (2021): .
- Alireza Torabi, Kazem Hamidi, and Behnam Shahbazian. "Compressive fracture analysis of U-notched specimens made of porous graphite reinforced by aluminum particles." DIAMOND AND RELATED MATERIALS 120, no. 108613 (2021): .
- Alireza Torabi, Moslem Mirzavand, and Behnam Saboori. "Investigation of notch effects on load-bearing capacity of AA7075-AA7075 friction-stir welded joints under mixed mode I/II loading." THEORETICAL AND APPLIED FRACTURE MECHANICS 118, no. 103252 (2022): .
- Alireza Torabi, Sahel Shahbaz, Sergio Cicero, and Majid Reza Ayatollahi. "Fracture testing and estimation of critical loads in a PMMA-based dental material with nonlinear behavior in the presence of notches." THEORETICAL AND APPLIED FRACTURE MECHANICS 118, no. 103282 (2022): .
- Alireza Torabi, Behnam Saboori, and Moslem Mirzavand. "Elastoplastic fracture analysis of thin notched AA7075-AA2024 dissimilar friction-stir-welded plates under mixed mode I/II loading." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES xxxx, no. xxxx (2022): 1-14.
- Saeed Aligholi, Laurent Ponson, Alireza Torabi, and Qianbing Zhang. "A new methodology inspired from the Theory of Critical Distances for determination of inherent tensile strength and fracture toughness of rock materials." International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 152, no. 105073 (2022): .
- Sahel Shahbaz, Majid Reza Ayatollahi, Michal Petru, and Alireza Torabi. "U-notch fracture in additively manufactured ABS specimens under symmetric three-point bending." THEORETICAL AND APPLIED FRACTURE MECHANICS 119, no. 103318 (2022): .
- Alireza Torabi, and Ebrahim Pirhadi. "Translaminar notch fracture toughness expressions for composite laminates." THEORETICAL AND APPLIED FRACTURE MECHANICS 119, no. 103332 (2022): .
- Alireza Torabi, Mahdi Jabbari, Javad Akbardoost, and Sergio Cicero. "A Modified Mean Stress Criterion for Considering Size Effects on Mode I Fracture Estimation of Rounded-Tip V-Notched Polymeric Specimens." Polymers 14, no. 1491 (2022): .
- Alireza Torabi, Majid Reza Ayatollahi, Filippo Berto, and Seyyed Mohammad Javad Razavi. "Experimental Verification of the Averaged Strain Energy Density Criterion for Brittle Fracture in Blunt V-Notches under Pure Compression." STRENGTH OF MATERIALS 54, no. 1 (2022): .
- Mohammad Hasaninia, and Alireza Torabi. "A two-level strategy for simplification of fracture prediction in notched orthotropic samples with nonlinear behavior." THEORETICAL AND APPLIED FRACTURE MECHANICS 120, no. 103388 (2022): .
- Alireza Torabi, Sobhan Mohammadi, Behnam Saboori, Majid Reza Ayatollahi, and Sergio Cicero. "Tensile-Tearing Fracture Analysis of U-Notched Spruce Samples." MATERIALS 15, no. 3661 (2022): .
- Mahdi Jabbari, Javad Akbardoost, and Alireza Torabi. "Size Effect on Mode I Fracture Resistance of Polymeric Rounded-Tip V-Notched Specimens Using the Modified Point Stress Criterion." JOURNAL OF ENGINEERING MECHANICS 148, no. 7 (2022): .
- Pedram Bagheri, and Alireza Torabi. "Providing a virtual material for simple estimation of fracture in U-notched highly orthotropic specimens with nonlinear behavior under mixed mode I/ II loading." THEORETICAL AND APPLIED FRACTURE MECHANICS 121, no. 103485 (2022): .
- Alireza Torabi, Mohammad Amin Motamedi, Bahador Bahrami, Meghdad Noushak, Sergio Cicero, and Jose Alberto Alvarez. "Determination of Translaminar Notch Fracture Toughness for Laminated Composites Using Brazilian Disk Test." Polymers 14, no. 3246 (2022): .
- Alireza Torabi, Bahador Bahrami, Mohammad Amin Motamedi, and Hossein Hasanvand. "On the use of Brazilian disk specimen for measuring mixed-mode I/II translaminar fracture toughness of notched glass/epoxy composite laminates: A comprehensive study." THEORETICAL AND APPLIED FRACTURE MECHANICS 121, no. 103541 (2022): .
- Alireza Torabi, Hossein Talebi, Majid Reza Ayatollahi, and Michal Petru. "Mixed mode I-III fracture resistance of stainless steel 316L weakened by V-notches with end holes." THEORETICAL AND APPLIED FRACTURE MECHANICS 122, no. 103574 (2022): .
- Ali Arabnia, Javad Akbardoost, Sergio Cicero, and Alireza Torabi. "Mixed Mode Fracture Investigation of Rock Specimens Containing Sharp V-Notches." MATERIALS 15, no. 15248779 (2022): .
- Alireza Torabi, Moslem Mirzavand, Behnam Saboori, and Sergio Cicero. "Fracture Behavior of AA7075-AA6061 and AA7075-Cu Friction-Stir Welded Joints Containing Blunt V-Notches under Opening-Mode Loading." MATERIALS 16, no. 16051757 (2023): .
- Pedram Bagheri, Alireza Torabi, and Bahador Bahrami. "A new strategy for predicting fracture of U-notched specimens made of Al-6061-T6 and Al-5083 using extended finite element method." FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES 9, no. 46 (2023): 1-13.
- Saeed Aligholi, Alireza Torabi, and Manoj Khandelwal. "Quantifying the cohesive strength of rock materials by roughness analysis using a domain based multifractal framework." International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 170, no. 105492 (2023): .
- Alireza Torabi, Sahel Shahbaz, and Majid Reza Ayatollahi. "Fracture assessment of U-notched diagonally loaded square plates additively manufactured from ABS with different raster orientations." ENGINEERING STRUCTURES 292, no. 116537 (2023): .
مقالات چاپ شده در نشریات داخلی
همایشهای بینالمللی
- Bahador Bahrami, Majid Reza Ayatollahi, and Alireza Torabi. "Fracture analysis of blunt V-notched PMMA under compressive-shear loading." The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2016), Tehran.
- Majid Reza Ayatollahi, Bahador Bahrami, and Alireza Torabi. "Investigation of mixed mode fracture in cracked Brazilian disk specimen under compressive mode I loading." The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2018), Tehran.
- Javier Gomez, M.a. Martin-rengel, Jesus Ruiz-hervias, and Alireza Torabi. "APLICACIÓN DEL CONCEPTO MATERIAL EQUIVALENTE AL ESTUDIO DE LA ROTURA PRODUCIDA POR ENTALLAS EN U." 35 Encuentro Del Grupo Espanol De Fractura,.
- Javier Gomez, and Alireza Torabi. "Application of the equivalent material concept to fracture of Unotched solids under small scale yielding." 22nd European Conference on Fracture-ECF22,.
- Alireza Torabi, Siavash Etesam, Alberto Sapora, and Pietro Cornetti. "Brazilian disk tests: Circular holes and size effects." 22nd European Conference on Fracture-ECF22, Belgrade.
- Majid Reza Ayatollahi, Alireza Torabi, Mohammad Torabi, and Abdol Saleh Rahimi. "CRACK EXTENSION IN THIN AL 6061-T6 SHEETS UNDER MIXED MODE I/II LOADING." 4th CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018 – ICAME2018, İSTANBUL.
- Fernando Javier Gomez, Manuel Ispizua, Sergio Cicero, and Alireza Torabi. "Study of the Validity of the Equivalent Material Concept in Prediction of Components Weakened by U-notches." Congress of Espanian Fracture Group, Sevilla.
- Majid Reza Ayatollahi, Alireza Torabi, and Sahel Shahbaz. "NOTCH STRENGTH EVALUATION OF POLYMERIC BONE CEMENT WITH NONLINEAR BEHAVIOR." 5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İSTANBUL.
- Sergio Cicero, Juan Diego Fuentes, F.T. Ibanez-Gutierrez, Virginia Madrazo, Alireza Torabi, and Hamid Reza Majidi. "Application of the Fictitious Material Concept and the Theory of Critical Distances in the fracture analysis of SGFR-PA6 SENB specimens containing U-notches and different moisture contents." 5th Iberian Conference on Structural Integrity (IbCSI 2020),.
- Sergio Cicero, Alireza Torabi, Hamid Reza Majidi, and Fernando Javier Gomez. "On the use of the combined FMC-ASED criterion for fracture prediction of notched specimens with nonlinear behavior." 1st Virtual European Conference on Fracture,.
- Fernando Javier Gomez, Sergio Cicero, and Alireza Torabi. "An extension of the Equivalent Material Concept applied to fracture of U-notched solids." 1st Virtual European Conference on Fracture,.
مدیر مسئولی ، سردبیری و ...
- Engineering Solid Mechanics, scientific and research-based, 2018/12/21, 2019/01/29
- Engineering Solid Mechanics, scientific and research-based, 2019/04/09, 2020/04/08
- Engineering Solid Mechanics, scientific and research-based, 2020/04/16, 2021/02/02
- Engineering Solid Mechanics, scientific and research-based, 2021/04/15, 2022/02/08
- Engineering Solid Mechanics, scientific and research-based, 2022/04/15, 2023/02/07
- Engineering Solid Mechanics, scientific and research-based, 2023/04/15, 2024/04/14
جوایز و افتخارات(در زمینههای مختلف مانند: طرح, مقاله, ...)